Westclox Tilt & Swivel Digital Alarm Clock Instruction Manual

مقدمة

Thank you for choosing the Westclox Tilt & Swivel Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

الميزات الرئيسية

• عرض رقمي: Features a large 1.8" LED digital display for easy reading.
• Tilt & Swivel Design: Unique tilt and swivel stand allows flexible positioning for optimal viewعمل.
• Extra Large Size: Measures 11" wide x 5" high x 5" deep for ampمساحة العرض.
• Quiet Alarm: Uses a loud, clear alarm sound.
• بناء متين: Made from sturdy ABS plastic with a powder-coated finish.

Image: The Westclox Tilt & Swivel Digital Alarm Clock, highlighting its large display and adjustable stand.

يثبت

تشغيل ساعتك

The Westclox Digital Alarm Clock operates primarily via AC power. Connect the provided power adapter to the clock's power input port and then plug it into a standard electrical outlet. The display will illuminate, indicating power is supplied.

تركيب البطارية الاحتياطية

للحصول على طاقة احتياطية أثناءtages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the clock. Ensure correct polarity (+/-) as indicated inside the compartment. The battery backup maintains time and alarm settings but does not power the display.

إعداد الوقت الأولي

Upon first power-up or after a prolonged power loss without battery backup, the display may show a default time. Refer to the 'Setting the Time' section under Operating Instructions to set the current time.

تعليمات التشغيل

ضبط الوقت

1. اضغط مع الاستمرار على الوقت المحدد button (usually located on the back or top of the clock) until the hour digits begin to flash.
2. اضغط على ساعة button repeatedly to adjust the hour. Pay attention to the PM indicator if using a 12-hour format.
3. اضغط على دقيقة اضغط على الزر بشكل متكرر لضبط الدقيقة.
4. اضغط على الوقت المحدد button again to confirm the time and exit time setting mode.

Setting Alarms (AL.1 and AL.2)

This clock features two independent alarms, AL.1 and AL.2.

1. اضغط مع الاستمرار على مجموعة AL.1 or مجموعة AL.2 اضغط على الزر حتى تبدأ أرقام ساعة التنبيه في الوميض.
2. اضغط على ساعة زر لضبط ساعة المنبه. راقب مؤشر الفترة المسائية.
3. اضغط على دقيقة زر لضبط دقيقة التنبيه.
4. اضغط على الزر المناسب مجموعة AL.1 or مجموعة AL.2 اضغط على الزر مرة أخرى لتأكيد وقت التنبيه.
5. To activate or deactivate an alarm, locate the AL.1 تشغيل/إيقاف or AL.2 تشغيل/إيقاف switch/button. Slide the switch to 'ON' or press the button to toggle the alarm. An indicator light (e.g., AL.1 or AL.2) will appear on the display when the alarm is active.

وظيفة الغفوة

Image: The top of the Westclox Digital Alarm Clock showing the prominent snooze/dimmer button.

عندما يصدر صوت التنبيه، اضغط على الزر الكبير غفوة / باهتة button located on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes. To turn off the alarm completely, press the corresponding AL.1 تشغيل/إيقاف or AL.2 تشغيل/إيقاف زر/مفتاح.

عرض باهتة

ال غفوة / باهتة button also controls the brightness of the LED display. Press this button (without an active alarm) to cycle through different brightness levels (e.g., High, Medium, Low, Off). Select the desired brightness for your environment.

Tilt and Swivel Feature

The clock is designed with a unique base that allows the display to be tilted vertically and swiveled horizontally. Gently adjust the clock face to your preferred viewing angle for optimal readability from any position in the room.

صيانة

To ensure the longevity and optimal performance of your Westclox Digital Alarm Clock, follow these simple maintenance guidelines:

• تنظيف: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• الموقع: Place the clock on a stable, flat surface. Avoid areas with extreme temperatures, direct sunlight, high humidity, or strong vibrations.
• استبدال البطارية: Replace the AAA backup batteries annually or when the clock experiences frequent power outages to ensure settings are retained.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

For warranty information or technical support, please refer to the packaging or contact Westclox customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.