SKYSHL SS322T-2G1 Single Mode OTDR Fiber Tester Instruction Manual

1. انتهى المنتجview

The SKYSHL SS322T-2G1 is a high-performance Single Mode Optical Time Domain Reflectometer (OTDR) designed for comprehensive fiber optic network testing. It integrates multiple essential functions including OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), Visual Fault Locator (VFL), Event Map, and APP Module connectivity. With 1310nm and 1550nm wavelengths and a dynamic range of 49dB, it is capable of testing distances up to 280km (174 miles). The device features a 7-inch touch screen for intuitive operation and supports various connector types, making it a versatile tool for fiber optic professionals.

الشكل 1: الجبهة view of the SKYSHL SS322T-2G1 OTDR Fiber Tester, showcasing its 7-inch touch screen interface.

2. معلومات السلامة

يرجى قراءة جميع تعليمات السلامة بعناية قبل تشغيل الجهاز. قد يؤدي عدم اتباع هذه التعليمات إلى الإصابة أو تلف الجهاز.

• سلامة الليزر: This device uses lasers. Do not look directly into the optical output ports when the device is active. Laser radiation can cause severe eye damage.
• مصدر الطاقة: Use only the specified power adapter and battery. Incorrect power sources can damage the device or cause fire.
• التعامل: تعامل مع الجهاز بحذر. تجنب سقوطه أو تعريضه لصدمات قوية.
• بيئة: لا تعرض الجهاز لدرجات حرارة شديدة أو رطوبة عالية أو بيئات أكالة.
• صيانة: Refer to the maintenance section for cleaning and care. Do not attempt to disassemble or repair the device yourself.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• 1x OTDR Set (main unit)
• 2x Fiber Optic Patch Cords (1*SM FC/UPC-FC/UPC + 1*SM FC/UPC-FC/APC)
• Various Connectors (FC-SC, FC-ST, FC-FC, FC-LC)
• كابل يو اس بي
• محول الطاقة
• دليل المستخدم
• مسحات التنظيف
• حقيبة الحمل

Figure 2: Included accessories and the main unit of the SKYSHL SS322T-2G1 OTDR Fiber Tester.

4. الميزات الرئيسية

• Dual Wavelengths & High Dynamic Range: 1310nm+1550nm with 49dB+49dB dynamic range, supporting test distances up to 280km.
• Multi-Function Integration: Combines OTDR, Optical Power Meter (OPM), Optical Light Source (OLS), and Visual Fault Locator (VFL) in one handheld device.
• Short Dead Zones: Event Dead Zone (EDZ) of 0.5m (typical for SM) and Attenuation Dead Zone (ADZ) of 3.0m (typical for SM) for precise fault detection.
• التشغيل الذكي: Features automatic testing, scheduled testing, and event mapping for simplified use.
• Smart APP & PC Software: Supports connectivity to Android phones/tablets and Windows PCs for real-time data viewing, sharing, analysis, and saving.
• Broad Connector Compatibility: Includes adapters for SC/UPC, ST/UPC, FC/UPC, LC/UPC, SC/APC, ST/APC, FC/APC, and LC/APC.
• إدارة البيانات: Allows saving test traces to SD card and USB flash disk, supports EI&SOR format, one-click screenshot, and one-click PDF generation.

5. تصميم الجهاز وواجهاته

Familiarize yourself with the physical components and connection ports of the SS322T-2G1.

الشكل 3: الجزء العلوي view of the device showing the VFL, OTDR, and OPM ports, along with USB and Ethernet ports.

• Optical Ports: Dedicated ports for OTDR, VFL, and OPM functions. Ensure correct fiber connection to the appropriate port.
• منافذ USB: Type A and Type B USB ports for connecting USB disks, external devices, or connecting to a computer.
• فتحة Micro SD: لزيادة سعة التخزين.
• منفذ إيثرنت: For network connectivity and functions like PING test.
• زر الطاقة: Located on the front panel for turning the device on/off.
• أزرار التنقل: Arrow keys and OK button for menu navigation and selection.
• شاشة لمس مقاس 7 بوصات: Primary interface for all operations and data display.

6. الإعداد

6.1 التشغيل المبدئي

1. اضغط مع الاستمرار على زر الطاقة حتى يتم تشغيل الجهاز.
2. The device will display the boot screen and then the main menu.

6.2 Language and Time Settings

To configure language and time:

1. From the main menu, tap on the نظام رمز.
2. انتقل إلى الإعدادات العامة.
3. يختار لغة and choose 'English'.
4. ضبط وقت الإعدادات حسب الحاجة.

6.3 Network Settings (Optional)

To connect to a Wi-Fi network for APP module functionality:

1. من نظام menu, tap on إعدادات الشبكة.
2. قم بتفعيل الواي فاي وابحث عن الشبكات المتاحة.
3. اختر الشبكة التي تريدها وأدخل كلمة المرور للاتصال.

Figure 4: The network settings interface on the SS322T-2G1, showing options for IP, Mask, Gateway, and Wi-Fi connection.

7. تعليمات التشغيل

7.1 OTDR Testing

The OTDR function is used to characterize optical fibers. Ensure the fiber under test is clean and properly connected.

1. From the main menu, tap on the OTDR رمز.
2. Connect the fiber to the OTDR port. Ensure the connector type matches (UPC/APC). Use appropriate adapters if necessary.
3. مقبض يثبت to configure test parameters.
4. حدد المطلوب الطول الموجي (1310nm or 1550nm).
5. اختر وضع (Auto-Test for automatic parameter selection or Manual for custom settings).
6. يُعدِّل متوسط ​​الوقت (averaging time), يتراوح، و عرض النبضة if in Manual mode.
7. مقبض امتحان or متوسط لبدء القياس.
8. The OTDR trace will be displayed on the screen, showing events like splices, connectors, and fiber ends.

الشكل 5: مثالample of 1310nm and 1550nm graphics analysis on the OTDR screen, detailing events and their characteristics.

7.2 مقياس القدرة الضوئية (OPM)

The OPM measures the optical power of a fiber optic signal.

1. From the main menu, tap on the أو بي إم رمز.
2. Connect the fiber to the OPM port.
3. Select the desired wavelength (850nm to 1650nm).
4. The screen will display the measured optical power in dBm or mW.

7.3 Optical Light Source (OLS)

The OLS provides a stable light source for various fiber optic tests.

1. From the main menu, tap on the نظام التشغيل العادي رمز.
2. Connect the fiber to the OLS port.
3. Select the desired wavelength (1310nm or 1550nm).
4. Choose the output mode (CW, 270Hz, 1kHz, 2kHz).
5. مقبض يبدأ to activate the light source.

7.4 محدد الأعطال المرئي (VFL)

The VFL emits a visible red laser to quickly locate breaks, bends, and faulty connectors in fiber optic cables.

1. From the main menu, tap on the فيكتوري FL رمز.
2. Connect the fiber to the VFL port.
3. مقبض يبدأ to activate the VFL.
4. Observe the fiber for any visible red light leakage, indicating a fault.

7.5 خريطة الحدث

The Event Map function provides a simplified, graphical representation of the fiber link, making it easier to identify and locate events without detailed trace analysis.

1. After performing an OTDR test, tap on the خريطة الحدث icon (if available in your UI version) or navigate to the analysis section.
2. The map will display icons representing different events (e.g., splices, connectors, fiber ends) and their distances.

Figure 6: Diagram illustrating various OTDR test event types such as splicing points, adapters, fractures, and fiber ends, as displayed on the test curve.

7.6 إدارة البيانات

The SS322T-2G1 allows for efficient management of test data.

1. توفير Files: After a test, tap يحفظ to store the trace data. You can choose to save to internal memory, SD card, or a connected USB disk.
2. تحميل Files: مقبض File to browse and load previously saved test files.
3. نقل Files: Use the USB Type A port to connect a USB flash drive for easy transfer of files between the device and external storage.
4. إنشاء تقرير بصيغة PDF: The device supports one-click PDF report generation for professional documentation of test results.

7.7 APP Module Connectivity

The Smart APP module allows for enhanced functionality and remote interaction with the device.

1. Ensure the device is connected to Wi-Fi (refer to Section 6.3).
2. Install the SKYSHL APP on your Android device (currently Android only) or Windows PC.
3. Follow the APP's instructions to connect to the SS322T-2G1.
4. يمكنك الآن view, share, analyze, and save test data in real-time from your connected device.

8. الصيانة

Proper maintenance ensures the longevity and accuracy of your SS322T-2G1 OTDR.

• Cleaning Optical Ports: Regularly clean the optical ports and fiber connectors using the provided cleaning swabs and appropriate fiber optic cleaning solutions. Dust and debris can significantly affect measurement accuracy.
• تنظيف الشاشة: Use a soft, lint-free cloth to clean the touch screen. Avoid abrasive materials or harsh chemicals.
• العناية بالبطارية: Charge the device regularly. For long-term storage, ensure the battery is partially charged (around 50%) and store in a cool, dry place. Avoid fully discharging the battery for extended periods.
• تحديثات البرامج: تحقق من الشركة المصنعة website periodically for software updates to ensure optimal performance and access to new features.
• تخزين: When not in use, store the device in its carrying bag to protect it from dust, moisture, and physical damage.

9. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your SS322T-2G1 OTDR.

10. المواصفات الفنية

11. الضمان والدعم

SKYSHL provides a 3-year free replacement warranty for the SS322T-2G1 OTDR Fiber Tester, along with lifetime maintenance. For any technical assistance, troubleshooting, or warranty claims, please contact SKYSHL customer support. A professional technical support team is available 24 hours a day to assist you.

For further information, please visit the official SKYSHL webالموقع أو راجع تفاصيل الاتصال المقدمة في عبوة المنتج الخاص بك.