OEDRO Running Boards Instruction Manual

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your OEDRO Armored Pedal Running Boards. Please read this manual thoroughly before installation and use to ensure proper fitment and safe operation. These running boards are designed to provide convenient entry and exit for your vehicle while offering side protection.

2. التوافق

تتوافق هذه الألواح الجانبية مع طرازات المركبات التالية:

• شيفروليه سيلفرادو 1500 كرو كاب موديلات 2019-2025
• جي إم سي سييرا 1500 كرو كاب موديلات 2019-2025
• 2020-2025 Chevy Silverado 2500HD 3500HD Crew Cab
• 2020-2025 GMC Sierra 2500HD 3500HD Crew Cab

ملحوظة: Excludes 2019 1500 LD/Limited models. Please verify your vehicle's cab size to ensure proper fitment.

3. محتويات العبوة

يرجى التأكد من وجود جميع المكونات قبل البدء في التثبيت:

• لوحان جانبيان
• مجموعة كاملة من أقواس التثبيت
• All necessary Hardware (bolts, washers, nuts)
• دليل تعليمات التركيب الذاتي (هذه الوثيقة)

4. الإعداد والتثبيت

Installation is a bolt-on process and typically requires general garage tools. No drilling or cutting is required for most models. For models from 2017 and later, trimming may be needed on the plastic DEF tank cover.

4.1 خطوات ما قبل التثبيت

1. قم بفك حزمة جميع المكونات وتحقق منها وفقًا لقائمة محتويات الحزمة.
2. Identify the mounting points on your vehicle's frame. These are typically pre-drilled holes covered by plastic plugs. Remove any plastic plugs from the mounting holes.
3. Familiarize yourself with the mounting brackets. Note that brackets are not pre-welded to the step bars.

4.2 تركيب كتيفة

1. Attach the appropriate mounting brackets to the vehicle's frame using the provided hardware. Ensure the bolts are finger-tight only at this stagهـ للسماح بالتعديل.
2. Repeat for all mounting points on both the driver and passenger sides.

4.3 Running Board Attachment

1. Carefully position the running board onto the installed brackets.
2. Secure the running board to the brackets using the remaining hardware. Again, keep bolts finger-tight.

4.4 Final Adjustment and Tightening

1. Adjust the running boards to your desired position, ensuring they are level and properly aligned with the vehicle.
2. Once satisfied with the alignment, fully tighten all bolts on the brackets and running boards. Do not overtighten.

4.5 مقاطع فيديو التثبيت

For a visual guide, please refer to the following installation videos:

5. تعليمات التشغيل

To use the running boards, simply step onto the textured surface when entering or exiting your vehicle. The wide step area and slip-proof design provide a secure footing.

6. الصيانة

To maintain the appearance and longevity of your OEDRO running boards:

• Regularly clean the running boards with mild soap and water to remove dirt, mud, and road salt.
• Inspect all mounting hardware periodically for tightness. Retighten if necessary.
• The durable powder coating provides protection against rust and corrosion. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.

7. استكشاف الأخطاء وإصلاحها

• قصة فضفاضة: If the running boards feel loose, check all mounting bolts and ensure they are securely tightened. Over time, vibrations can cause bolts to loosen.
• ضوضاء غير عادية: Rattling or squeaking noises may indicate loose hardware or improper installation. Re-inspect all connection points and tighten as needed.
• Surface Wear/Rust: While designed for rust resistance, extreme conditions or damage to the coating can lead to wear. Clean the affected area and apply a rust-inhibiting paint if necessary.

8. المواصفات

9. الضمان

This product comes with a 1-year manufacturer's warranty. For warranty claims or further inquiries, please refer to the customer support information.

10. دعم العملاء

Should any inquiries arise regarding your OEDRO Running Boards, please feel free to contact us directly through the retailer's customer service channels. We are committed to providing assistance and ensuring your satisfaction.