Hamilyeah Bathroom Vanity Light Fixture

1. المقدمة

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Hamilyeah Bathroom Vanity Light Fixture, Model WLFBR1006. This modern wall-mounted lighting fixture features a brass electroplated metal finish and clear glass shades, designed for indoor use in areas such as bathrooms and living rooms. Please read this manual thoroughly before installation and retain it for future reference.

Figure 1: Hamilyeah 3-Light Gold Bathroom Vanity Light Fixture.

2. معلومات السلامة

WARNING: Risk of Electric Shock. Always shut off power to the circuit at the main electrical panel and use a voltage tester to confirm the power is off before beginning any installation, maintenance, or bulb replacement procedures. Failure to do so may result in serious injury or death.

• تأكد من أن جميع التوصيلات الكهربائية تتوافق مع القوانين واللوائح المحلية، بالإضافة إلى قانون الكهرباء الوطني (NEC).
• If you are unsure about wiring or installation, consult a qualified licensed electrician.
• لا تتجاوز الحد الأقصى للواطtage specified for the bulbs (Max 100W per socket).
• This fixture is designed for indoor use only and is suitable for damp المواقع. لا تقم بالتركيب في المناطق المعرضة للماء بشكل مباشر.
• تعامل مع أغطية المصابيح الزجاجية بحرص لتجنب كسرها.

3. محتويات العبوة

تأكد من وجود جميع المكونات وسلامتها قبل البدء بالتثبيت. في حال وجود أي أجزاء مفقودة أو تالفة، يرجى التواصل مع خدمة العملاء.

• Light Fixture (Main Unit)
• أغطية زجاجية (3 قطع)
• Mounting Hardware (Instruction Kits)
• دليل التعليمات (هذا المستند)

4. مواصفات المنتج

الشكل 2: أبعاد المنتج والميزات الرئيسية.

Figure 3: Key Material and Finish Features.

5. دليل التثبيت

Installation should be performed by individuals with full electrical knowledge and previous experience. Refer to the included Instruction Kits for detailed diagrams. For a comprehensive guide, you may also refer to the دليل التثبيت (PDF).

الأدوات المطلوبة (غير متضمنة):

• مفك براغي (فيليبس ومسطح الرأس)
• أداة تجريد الأسلاك
• كماشة
• شريط كهربائي
• المجلدtagتستر ه
• نظارات السلامة

خطوات التثبيت:

1. السلامة اولا: Before starting, ensure the power to the light fixture's circuit is turned off at the circuit breaker or fuse box. Use a voltage tester to confirm that the power is completely off at the wall box.
2. قم بتثبيت لوحة التثبيت: Secure the mounting plate to the electrical junction box in the wall using the provided screws. Ensure it is firmly attached and level.
3. Hardwire the Light Fixture: Connect the electrical wires from the fixture to the corresponding wires in the junction box. Typically, connect the black wire (live) from the fixture to the black wire from the wall, the white wire (neutral) from the fixture to the white wire from the wall, and the green or bare copper wire (ground) from the fixture to the ground wire from the wall. Use wire nuts to secure connections and wrap with electrical tape for added safety.
4. Tighten the Fixture: Carefully align the fixture body with the mounting plate and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall and stable.
5. تركيب أغطية زجاجية ومصابيح: Gently attach the glass shades to the fixture. Insert E26 base bulbs (Max 100W, not included) into each socket.
6. اعادة الطاقة: Once installation is complete and all connections are secure, turn the power back on at the main electrical panel. Test the light fixture.

The wall sconces can be installed to point upwards or downwards, depending on your desired aesthetic and lighting direction.

6. التشغيل

Your Hamilyeah Bathroom Vanity Light Fixture is designed for straightforward operation.

تشغيل/إيقاف:

Control the light fixture using your standard wall switch connected to the circuit. Ensure the switch is in the 'ON' position for the fixture to receive power.

وظيفة التعتيم:

This fixture is dimmable, allowing you to adjust the brightness to suit your needs and create different ambiances. To utilize the dimmable feature, you must use:

• Dimmable E26 Bulbs: Ensure the bulbs you install are explicitly rated as dimmable.
• Compatible Dimmer Switch: A dimmer switch (not included) must be installed on the wall circuit controlling the fixture. Consult a qualified electrician for dimmer switch installation if needed.

7. الرعاية والصيانة

Regular care will help maintain the appearance and functionality of your light fixture.

تنظيف:

• Always turn off the power to the fixture and allow it to cool before cleaning.
• Wipe the metal parts with a soft, dry cloth. Avoid abrasive cleaners, solvents, or polishes as they may damage the finish.
• The glass shades can be cleaned with a soft cloth dampened with water or a mild glass cleaner. Dry thoroughly.

استبدال المصباح:

• Ensure the power is off and the bulbs have cooled before attempting to replace them.
• قم بفك المصباح القديم E26 عكس اتجاه عقارب الساعة.
• Screw in the new E26 bulb clockwise, ensuring it is rated for a maximum of 100W.
• Only use bulbs with an E26 base.

8. استكشاف الأخطاء وإصلاحها

إذا واجهت مشكلات مع تركيبات الإضاءة لديك، فراجع المشكلات والحلول الشائعة التالية:

If the problem persists after attempting these solutions, please contact Hamilyeah customer support.

9. الضمان ودعم العملاء

معلومات الضمان:

Hamilyeah provides a ضمان لمدة 1 سنوات for this product, ensuring your confidence in its quality and performance. This warranty covers manufacturing defects and issues arising from normal use.

دعم العملاء:

Ensuring every customer is satisfied is our top priority. If you have any questions, concerns, or require assistance with your Hamilyeah product, please do not hesitate to contact us. We are always glad to help!

To communicate with Hamilyeah customer support:

1. Go to your order history on the platform where you purchased the product.
2. Find your specific order for the Hamilyeah Bathroom Vanity Light Fixture.
3. Select the option for 'Problem with Order' or 'Contact Seller'.
4. Choose the relevant topic for your inquiry.

We are committed to providing professional after-sale service to ensure an enjoyable shopping experience.