Laney LFR-212

جيتار لاني LFR-212 Ampدليل مستخدم مكبر الصوت

Model: LFR-212

مقدمة

This manual provides essential information for the safe and efficient operation of your Laney LFR-212 Guitar Amplifier. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your ampمكبر.

تعليمات السلامة

  • قم دائمًا بتوصيل ampقم بتوصيل مكبر الصوت بمأخذ كهربائي مؤرض.
  • لا تعرض ampمكبر للمطر أو الرطوبة.
  • تأكد من التهوية المناسبة لمنع ارتفاع درجة الحرارة.
  • لا تقم بإزالة amplifier cover; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • تجنب وضع الأشياء الثقيلة على ampمكبر.
  • Disconnect the power cord before cleaning or moving the unit.

محتويات الحزمة

تأكد من أن الحزمة الخاصة بك تحتوي على العناصر التالية:

  • جيتار لاني LFR-212 Ampالقمامة
  • سلك الطاقة
  • دليل المستخدم (هذا المستند)

يثبت

Follow these steps to set up your Laney LFR-212 ampمكبر:

  1. الموقع: وضع amplifier on a stable, level surface. Ensure adequate space around the unit for ventilation. The LFR-212 is designed for floor standing use.
  2. توصيل الطاقة: قم بتوصيل سلك الطاقة المرفق بـ amplifier's power input and then to a grounded electrical outlet. Ensure the ampيجب أن يكون مفتاح الطاقة الخاص بالمكبر في وضع الإيقاف قبل التوصيل.
  3. توصيلات الإدخال:
    • For guitar processors or modelers, use the XLR/Jack Combo Sockets.
    • For auxiliary audio sources like MP3 players, use the MP3/Aux input.
  4. توصيلات الإخراج (اختياري): If connecting to a mixing console or recording interface, use the XLR DI outputs.
أمام view of the Laney LFR-212 Guitar Amplifier, showing the speaker grille and control panel.

الشكل 1: الجبهة view of the Laney LFR-212 Amplifier. This image displays the main speaker grille and the general aesthetic of the unit, including the switchable front lighting.

تعليمات التشغيل

  1. تشغيل الطاقة: بعد إتمام جميع التوصيلات، قم بتشغيل ampتشغيل مكبر الصوت.
  2. التحكم في مستوى الصوت: Start with the master volume control at a low setting. Gradually increase to your desired listening level.
  3. HF Trim: Use the HF Trim control to adjust the high-frequency response of the amplifier. This allows for fine-tuning the brightness to match your guitar processor's output and room acoustics.
  4. Front Lighting: ال amplifier features switchable front lighting. Use the dedicated switch to turn this feature on or off according to your preference.
  5. اختيار الإدخال: Ensure your audio source is connected to the correct input (XLR/Jack Combo for guitar processors, MP3/Aux for auxiliary devices).

The LFR-212 is designed to provide a detailed, accurate, wide-range response, ensuring every detail of your digital guitar setting is heard clearly. It features a single channel for straightforward operation.

صيانة

  • تنظيف: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use liquid cleaners or abrasive materials.
  • تهوية: تأكد بانتظام من أن فتحات التهوية خالية من الغبار والحطام لمنع ارتفاع درجة الحرارة.
  • تخزين: عند عدم الاستخدام لفترات طويلة، قم بتخزينه ampضع جهاز التكييف في بيئة جافة وباردة، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
  • مواصلات: Utilize the ergonomic side-mount handles for safe and easy transportation of the unit.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
لا يوجد طاقةPower cord not connected; power outlet not active; amplifier power switch off.Ensure power cord is securely connected. Check power outlet with another device. Turn amplifier power switch ON.
لا يوجد مخرج صوتInput cable not connected; volume too low; incorrect input selected; external device issue.Verify input cable connection. Increase master volume. Ensure correct input is used. Check the external audio source or guitar processor.
صوت مشوهإشارة الإدخال عالية جدًا؛ amplifier volume too high; faulty cable.Reduce input signal level from your source. Lower amplifier volume. Try a different input cable.
ارتفاع درجة الحرارةالتهوية مسدودة.تأكد من وجود مساحة كافية حول amplifier and clear all ventilation openings.

تحديد

  • نموذج: LFR-212
  • انتاج الطاقة: 800 واط
  • المتحدثون: 2 x Custom 12" Drivers + 1" LaVoce Compression Driver
  • المدخلات: MP3/Aux, XLR/Jack Combo Sockets
  • المخرجات: XLR DI
  • القنوات: قناة واحدة
  • عناصر التحكم: HF Trim, Master Volume
  • سمات: Switchable front lighting, Ergonomic side mount handles
  • Product Dimensions (H x W x L): 770 x 550 x 360 mm (approximately 30.3" x 21.6" x 14.2")
  • وزن السلعة: 29.5 كجم (حوالي 65 رطل)
  • مادة العلبة: الفولاذ المقاوم للصدأ
  • تقنية الاتصال: Auxiliary, Jack, XLR
  • مصدر الطاقة: كهرباء سلكية

معلومات الضمان

The Laney LFR-212 Guitar Ampيأتي الليف مع أ ضمان محدود لمدة عامين from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, unauthorized repair, or normal wear and tear.

For warranty service, please retain your proof of purchase and contact Laney customer support.

دعم العملاء

If you have any questions or require assistance with your Laney LFR-212 Guitar Amplifier, please contact Laney customer support through their official webالموقع أو مراكز الخدمة المعتمدة.

For the most up-to-date support information, please visit the official Laney webموقع: www.laney.co.uk

© 2026 لاني Ampجميع الحقوق محفوظة.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.