مقدمة
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your GoolRC Flysky FS-i6X 2.4GHz 10CH RC Transmitter and FS-iA10B Receiver. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
The FS-i6X utilizes AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) technology, offering enhanced interference protection, low power consumption, and reliable receiver sensitivity. Each transmitter and receiver pair has a unique ID to prevent interference.
محتويات الحزمة
تأكد من وجود جميع العناصر في الحزمة الخاصة بك:
- FS-i6X RC Transmitter
- جهاز استقبال FS-iA10B
- ربط التوصيل
- دليل التعليمات
- ترقية الكابلات
Image: The complete package contents including the FS-i6X transmitter, FS-iA10B receiver, bind plug, manual, and upgrade cable.
يثبت
1. جهاز الإرسالview
Image: Labeled diagram of the FS-i6X transmitter showing controls like joysticks, switches, fine-tuning rods, and the LCD display.
Familiarize yourself with the transmitter's components:
- الهوائي: Transmits the radio signal.
- مقبض: For carrying and holding the transmitter.
- VRA/VRB: Rotary potentiometers for proportional control.
- Switches A, B, C, D: Toggle switches for various functions.
- Left/Right Joystick: Main control sticks for aircraft movement.
- Fine-tuning rods 1-4: Trim adjustments for precise control.
- UP/Down buttons: Navigation buttons for menu.
- OK/Cancel buttons: Menu selection and exit.
- Bind key: يستخدم لربط جهاز الإرسال بجهاز الاستقبال.
- زر الطاقة: يقوم بتشغيل / إيقاف تشغيل جهاز الإرسال.
- شاشة LCD: Shows operational data and menu options.
2. تركيب البطارية
The FS-i6X transmitter requires 4 AA batteries (not included).
- حدد مكان حجرة البطارية في الجزء الخلفي من جهاز الإرسال.
- افتح غطاء حجرة البطارية.
- قم بإدخال بطاريتين AA، مع التأكد من القطبية الصحيحة (+/-).
- أغلق غطاء حجرة البطارية جيدًا.
الصورة: الجزء الخلفي view of the FS-i6X transmitter showing the open battery compartment for 4 AA batteries.
3. Receiver Connection (FS-iA10B)
Connect the FS-iA10B receiver to your RC model's flight controller or servos. The receiver supports 10 PWM channels and features i-BUS serial interface and i-BUS sensor interface.
Image: A detailed wiring diagram illustrating how to connect the FS-iA10B receiver to various components like servos for rudder, throttle, elevator, and aileron, along with battery and bind cable connections.
Note: Do not power on the receiver during the setup process to prevent loss of control.
Ensure the receiver antennas are positioned correctly for optimal signal reception. The antennas should be at a 90-degree angle to each other and away from conductive materials.
Image: Diagrams showing recommended antenna placement for the FS-iA10B receiver, emphasizing a 90-degree orientation for optimal signal.
4. ربط المرسل والمستقبل
لإقامة اتصال بين المرسل والمستقبل، يلزم إجراء عملية ربط:
- تأكد من إيقاف تشغيل جهاز الإرسال.
- Connect the bind plug to the B/VCC port on the FS-iA10B receiver.
- Apply power to the receiver (e.g., from the flight controller or a separate battery). The receiver's LED should flash rapidly.
- While holding down the "Bind key" on the transmitter, power on the transmitter.
- The transmitter's LCD will display "Binding..." or similar. Once binding is successful, the receiver's LED will turn solid.
- Release the bind key on the transmitter.
- قم بإيقاف تشغيل كل من جهاز الاستقبال وجهاز الإرسال.
- قم بإزالة قابس الربط من جهاز الاستقبال.
- Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.
تعليمات التشغيل
1. Powering On and Initial Checks
When powering on the transmitter, ensure the throttle stick is at its lowest position. If not, a "Throttle Warning" will appear on the LCD. Move the throttle stick to the lowest position or press any key to bypass the warning.
2. عناصر التحكم والوظائف الأساسية
The FS-i6X transmitter is designed for various RC models, including airplanes, gliders, and helicopters. Its 10 channels (6 default) provide extensive control capabilities.
- عصا التحكم: Control primary flight surfaces (aileron, elevator, rudder) and throttle.
- المفاتيح: Activate auxiliary functions such as landing gear, flaps, or flight modes.
- Rotary Knobs (VRA/VRB): Provide proportional control for specific functions.
- Fine-tuning Rods: Used for minor adjustments to channel outputs to achieve neutral trim.
Image: The FS-i6X transmitter shown alongside various compatible RC models including an RC plane, drone, robot, car, helicopter, and boat.
3. AFHDS 2A Technology
The Automatic Frequency Hopping Digital System Second Generation (AFHDS 2A) ensures a robust and reliable connection:
- حماية التدخل: Utilizes multi-channel hopping frequency to minimize interference from other radio sources.
- استهلاك منخفض للطاقة: Designed for extended battery life.
- Unique ID System: Each transmitter and receiver pair has a unique ID, preventing cross-interference with other systems.
Image: The FS-i6X transmitter display showing AFHDS 2A, emphasizing the advanced digital system for reliable communication.
4. LCD Screen and Menu Navigation
The dot matrix backlit LCD screen provides clear information and allows for easy menu navigation. Use the UP/DOWN buttons to scroll through options and the OK/CANCEL buttons to select or exit.
Image: Close-up of the FS-i6X transmitter's dot matrix backlit LCD screen displaying system information.
To save changes made in the menu, you typically need to hold the CANCEL button. Refer to the on-screen prompts for specific saving procedures.
صيانة
- تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف جهاز الإرسال والاستقبال. تجنب استخدام المذيبات أو المنظفات الكاشطة.
- تخزين: خزّن الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى. أزل البطاريات إذا كنت ستخزنه لفترات طويلة.
- العناية بالبطارية: Replace AA batteries when the low voltage alarm activates (below 4.2V).
- تحديثات البرامج الثابتة: The transmitter supports online firmware updates via the upgrade cable. Check the manufacturer's webموقع للحصول على أحدث إصدارات البرامج الثابتة والتعليمات.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| "Throttle Warning" on startup | عصا الخانق ليست في أدنى موضع. | Move the throttle stick to the lowest position. Press any key to skip the warning. |
| Menu changes not saving | Incorrect save procedure. | After making changes, hold the CANCEL button to save. Refer to the specific menu's instructions. |
| Channels 7-10 not responding | Channels are turned off by default. | Access the transmitter's menu to manually enable channels 7-10 and assign them to desired switches. |
| Transmitter not binding with receiver | Incorrect binding procedure, receiver not powered, or bind plug not used. | Review the binding steps in the "Setup" section. Ensure the bind plug is correctly inserted and the receiver is powered during the binding process. |
| Firmware update cable not working | Faulty cable or driver issues. | Ensure correct drivers are installed. Try a different USB port or cable if available. Contact support if the issue persists. |
| Drift in control sticks | Calibration issue or wear. | Perform a stick calibration through the transmitter's menu. Use trim adjustments for minor corrections. For persistent issues, professional repair may be needed. |
تحديد
FS-i6X Transmitter Specifications:
| ميزة | التفاصيل |
|---|---|
| نموذج المنتج | FS-i6X |
| القنوات | 6-10 (الافتراضي 6) |
| لون | أسود |
| الموديلات المتوافقة | Fixed wing, glider, helicopter, boat |
| التردد اللاسلكي | 2.4 جيجاهرتز |
| نوع الهوائي | هوائي مزدوج |
| قوة النقل | < 20 ديسيبل |
| حجم منخفضtage إنذار | < 4.2 فولت |
| بروتوكول لاسلكي | AFHDS 2A |
| منفذ البيانات | PS/2 (PPM) |
| يتراوح | 500 ~ 1500m (in the air) |
| قرار القناة | 4096 |
| بطارية | 1.5V AA * 4 |
| التحديث عبر الإنترنت | نعم |
| لغة | الصينية والانجليزية |
| عرض | STN transflective display, LCD 128x64 dot matrix |
| مدى درجة الحرارة | -10 درجة مئوية ~ +60 درجة مئوية |
| نطاق الرطوبة | 20% - 95% |
| أبعاد | 174 × 89 × 190 ملم |
| وزن الجسم | 392 جرام |
| الشهادات | CE certification, FCC ID: N4ZFLYSKYI6X |
Image: Visual representation of the FS-i6X transmitter and its detailed specifications.
FS-iA10B Receiver Specifications:
| ميزة | التفاصيل |
|---|---|
| نموذج المنتج | FS-iA10B |
| قنوات PWM | 10 |
| التردد اللاسلكي | 2.4 جيجاهرتز |
| بروتوكول لاسلكي | AFHDS 2A |
| يتراوح | 500 ~ 1500m (in the air) |
| نوع الهوائي | Dual copper tube antenna (150mm * 2) |
| قوة | 4.0-6.5 فولت / تيار مستمر |
| مؤشر القوة النسبية | مدعوم |
| منفذ البيانات | PWM / i.bus / s.bus |
| مدى درجة الحرارة | -10 درجة مئوية ~ +60 درجة مئوية |
| نطاق الرطوبة | 20% - 95% |
| التحديث عبر الإنترنت | نعم |
| أبعاد | 47 * 33.1 * 14.7 ملم |
| وزن | 19.3 جرام |
| الشهادات | CE certification, FCC ID: N4ZFLYSKYIA10 |
Image: Visual representation of the FS-iA10B receiver and its detailed specifications.
معلومات الضمان
GoolRC provides a warranty for this product. If you encounter any problems, please contact the store where you purchased the product in a timely manner. The manufacturer is committed to providing a satisfactory solution.
يدعم
For further assistance, technical support, or additional resources, please refer to the official GoolRC webالموقع الإلكتروني أو تواصل مع قسم خدمة العملاء. احتفظ بإيصال الشراء لطلبات الضمان.
Official GoolRC Store: GoolRC Amazon Store