مقدمة
Thank you for choosing the NOVSIGHT A500-N35 Series LED Headlight/Fog Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulbs. Please read this manual thoroughly before installation and keep it for future reference.
The A500-N35 series offers superior brightness and a precise beam pattern, enhancing visibility and driving safety. Designed for easy installation, these bulbs are a direct replacement for HB4 9006 halogen bulbs in most vehicles.
معلومات السلامة
أعطِ الأولوية دائمًا للسلامة أثناء التركيب والتشغيل. قد يؤدي عدم اتباع هذه الإرشادات إلى الإصابة أو تلف المنتج أو المركبة.
- تأكد من إيقاف تشغيل محرك السيارة وفصل البطارية قبل البدء في التركيب لتجنب الصدمة الكهربائية.
- ارتدِ معدات السلامة المناسبة، بما في ذلك القفازات وحماية العين.
- Avoid touching the LED chips directly, as oils from your skin can reduce their lifespan.
- Do not look directly into the illuminated LED bulb, as it can cause eye damage.
- احفظ المنتج بعيدًا عن متناول الأطفال.
- إذا كنت غير متأكد من أي جزء من عملية التثبيت، فاستشر فني سيارات مؤهل.
محتويات الحزمة
تأكد من أن جميع المكونات موجودة وغير تالفة قبل الشروع في التثبيت.
- NOVSIGHT A500-N35 LED Headlight/Fog Lamp Bulbs (2x)
- دليل التعليمات (هذا المستند)
Note: Additional accessories may vary depending on the specific kit purchased.
الإعداد والتثبيت
The NOVSIGHT A500-N35 LED bulbs are designed for a plug-and-play installation, closely matching the size of standard halogen bulbs (HB4 9006). No additional harnesses are typically required.
- تحضير: Park your vehicle on a level surface, turn off the engine, and engage the parking brake. Disconnect the negative terminal of your vehicle's battery.
- الوصول إلى المصباح: Locate the headlight or fog lamp assembly. Depending on your vehicle model, you may need to remove certain components (e.g., air intake, battery, or fender liner) to gain access to the back of the bulb housing.
- إزالة المصباح القديم: Disconnect the electrical connector from the existing halogen bulb. Then, unclip or twist to remove the old bulb from its housing.
- تركيب لمبة LED: Insert the NOVSIGHT A500-N35 LED bulb into the housing, ensuring it is seated correctly and securely. The 1:1 halogen size design ensures compatibility with most vehicle housings.
- توصيل الكهرباء: Connect the electrical connector from your vehicle's wiring harness to the NOVSIGHT LED bulb. Ensure a secure connection.
- وظيفة الاختبار: Reconnect the vehicle's battery. Turn on your headlights/fog lights to verify that the new LED bulbs are functioning correctly. Check both low beam and high beam (if applicable) and ensure the beam pattern is correct.
- التجميع النهائي: Reinstall any components removed during step 2.
ملاحظة هامة: If you encounter any issues with fitment or functionality, or if you are new to automotive lighting installation, please contact NOVSIGHT customer service for assistance. They can provide installation videos and support.

الشكل 1: الأمامي والجانبي view of the NOVSIGHT A500-N35 LED bulb, showing its compact design for easy installation.

Figure 2: Illustration of the all-in-one compact design of the NOVSIGHT LED bulb, emphasizing its 1:1 halogen size for broad vehicle compatibility and plug-and-play installation.
تعليمات التشغيل
Once installed, operating your NOVSIGHT A500-N35 LED headlights is similar to operating standard vehicle lights.
- Turn on your vehicle's headlights or fog lights using the standard controls.
- The A500-N35 bulbs provide a 6000K cool white light, offering enhanced visibility.
- The advanced beam pattern is designed to illuminate the road effectively without causing glare to oncoming traffic.

Figure 3: Comparison of road visibility at night, demonstrating the improved clarity and illumination provided by NOVSIGHT LED headlights compared to standard halogen lamps.

Figure 4: Driver's perspective view comparing the low beam and high beam performance of NOVSIGHT LED headlights versus halogen lamps, highlighting the enhanced brightness and coverage.
صيانة
NOVSIGHT A500-N35 LED bulbs are designed for long-term, maintenance-free operation, with a lifespan of up to 50,000 hours. Minimal maintenance is required.
- تنظيف: Periodically clean the headlight lenses of your vehicle to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solutions.
- تقتيش: Occasionally inspect the bulbs and connections for any signs of damage or loose wiring.
- نظام التبريد: The integrated AirCool intelligent frequency conversion heat dissipation and Airlux circulation fan-less cooling technology ensure optimal operating temperature. Ensure that the area around the bulb housing is not obstructed to allow for proper heat dissipation.

Figure 5: Diagram illustrating the advanced cooling system of the NOVSIGHT LED bulb, featuring intelligent frequency conversion heat dissipation and fan-less technology for extended lifespan.
استكشاف الأخطاء وإصلاحها
If you experience issues with your NOVSIGHT A500-N35 LED bulbs, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| المصباح لا يضيء. |
|
|
| Flickering or intermittent light. |
|
|
| Error message on dashboard. |
|
|
| Beam pattern is incorrect or scattered. |
|
|
If these troubleshooting steps do not resolve your issue, please contact NOVSIGHT customer support for further assistance.
تحديد
| ميزة | التفاصيل |
|---|---|
| نموذج | A500-N35 |
| نوع المصباح | HB4 (9006) LED |
| مصدر الضوء | قاد |
| درجة حرارة اللون | 6000 كيلو أبيض بارد |
| سطوع | 7000 LM/Pair (3500 LM/Bulb) |
| واتtage | 40 واط/الزوج |
| المجلدtage | 12 فولت |
| عمر | تصل إلى 50,000 ساعة |
| تصنيف مقاومة الماء | IP68 |
| درجة حرارة التشغيل | من -40 درجة مئوية إلى +80 درجة مئوية |
| نظام التبريد | AirCool Intelligent Frequency Conversion Heat Dissipation, Airlux Fan-less Technology |

الشكل 6: الصورة عن قرب view of the NOVSIGHT LED bulb, highlighting the high-quality TYANSHINE chip for superior brightness and stability.

Figure 7: Lux meter readings comparing the brightness of a standard halogen bulb (2207 LUX) against the NOVSIGHT LED headlight (3493 LUX), demonstrating significantly higher light output.
الضمان والدعم
NOVSIGHT provides customer support for its products. If you have any questions regarding installation, operation, or troubleshooting, please contact NOVSIGHT customer service.
- الاتصال بالدعم: If you are unsure about the correct bulb size for your vehicle, or if you need assistance with installation, please contact NOVSIGHT customer service before or after purchase.
- فيديو التثبيت: Upon request, NOVSIGHT customer service can provide installation videos to guide you through the process.
- خدمة 24 ساعة: NOVSIGHT offers 24-hour support for any inquiries or issues you may have.
For the most up-to-date warranty information and contact details, please refer to the official NOVSIGHT webالموقع أو وثائق الشراء الخاصة بك.