VEVOR 5T Pneumatic Air Jack Instruction Manual

1. المقدمة

The VEVOR 5T Pneumatic Air Jack is a robust and efficient lifting device designed for various vehicles, including cars, minivans, and SUVs. Constructed from high-strength steel, this air jack offers a maximum lifting capacity of 5 tons (11023 lbs) and can raise a vehicle from 6.3 inches (16 cm) to 15.75 inches (40 cm) in approximately 3-5 seconds. Its triple airbag design ensures stable and secure lifting, making it suitable for use on diverse terrains, including soft ground, sand, or muddy roads.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Pneumatic Air Jack. Please read it thoroughly before initial use.

Image 1.1: The VEVOR 5T Pneumatic Air Jack positioned under a vehicle for lifting. It features a triple airbag design and a sturdy base with wheels for maneuverability.

Image 1.2: The VEVOR Pneumatic Air Jack demonstrating its lifting capability, supporting a vehicle with its inflated airbags. The image highlights its application for automotive maintenance.

2. تعليمات السلامة

تحذير: قد يؤدي عدم اتباع تعليمات السلامة هذه إلى إصابات خطيرة أو أضرار في الممتلكات.

• Always read and understand the entire manual before operating the air jack.
• Ensure the jack is placed on a firm, level surface. Avoid uneven or soft ground.
• Never exceed the rated lifting capacity of 5 tons (11023 lbs).
• Always use appropriate jack stands to support the vehicle once it is lifted. Never work under a vehicle supported only by the air jack.
• Keep hands, feet, and other body parts clear of the jack and the vehicle during lifting and lowering operations.
• Ensure the air supply is clean and dry. Use an air compressor with sufficient capacity and pressure.
• Do not modify the air jack in any way. Use only original replacement parts.
• Inspect the jack for damage or wear before each use. Do not use if damaged.
• ارتداء معدات الحماية الشخصية المناسبة، مثل نظارات السلامة والقفازات.
• أبعد الأطفال والمارة عن منطقة العمل.

3. مكونات المنتج

The VEVOR Pneumatic Air Jack consists of several key components designed for durability and ease of use:

• إطار فولاذي عالي القوة: Provides overall structural integrity and durability.
• Triple Airbag System: Made from rugged, high-tightness rubber to prevent air leakage and ensure stable lifting.
• Thickened Rubber Pad: Located at the top contact point, it protects the vehicle's chassis from damage during lifting.
• مقبض التحكم: Ergonomically designed for easy maneuvering and operation of the air valves.
• Air Inlet Valve (Green): Controls the inflation of the airbags.
• Air Release Valve (Red): Controls the deflation of the airbags.
• Durable Rubber Wheels: Facilitate easy movement and positioning of the jack, suitable for various surfaces.

الصورة 3.1: عن قرب views of the VEVOR Air Jack's construction, highlighting the thickened rubber pad for chassis protection, the rugged triple airbag for durability, and the durable rubber wheels for mobility.

الصورة 3.2: تفصيلية view of the thickened rubber pad, designed to prevent damage to the vehicle's chassis during lifting operations.

Image 3.3: A close-up of the rugged triple airbag, emphasizing its high sealing performance and wear resistance for reliable and scratch-free operation.

Image 3.4: A detailed image of one of the durable rubber wheels, highlighting its suitability for various terrains, including soft or muddy surfaces.

4. الإعداد

Before using the VEVOR Pneumatic Air Jack, ensure proper setup:

1. فك مكونات الحزمة: قم بإزالة جميع المكونات من العبوة بعناية. تأكد من وجود جميع الأجزاء وأنها سليمة.
2. تجميع المقبض: Attach the control handle to the main body of the air jack using the provided fasteners. Ensure it is securely tightened.
3. توصيل خرطوم الهواء: Connect your air compressor hose to the air inlet valve (green valve) on the jack's control unit. Ensure a tight, leak-free connection.
4. تجهيز منطقة العمل: Position the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will not be lifted.

Image 4.1: The VEVOR Air Jack disassembled into its main components, including the airbag unit, handle, and control valve, illustrating its compact size for storage and ease of assembly.

الصورة 4.2: النفقات العامة view of the VEVOR Air Jack components laid out, demonstrating its compact design and the parts required for assembly and operation.

5. تعليمات التشغيل

Follow these steps for safe and effective operation of your VEVOR Pneumatic Air Jack:

5.1. Lifting the Vehicle

1. وضع الرافعة: Roll the air jack under the vehicle, ensuring the thickened rubber pad is centered directly under a strong, load-bearing point of the vehicle's frame or designated jacking point.
2. Close Red Valve: Ensure the red air release valve is fully closed.
3. Open Green Valve: Slowly open the green air inlet valve to allow compressed air to enter the airbags. The jack will begin to inflate and lift the vehicle.
4. Monitor Lifting: Continuously monitor the lifting process, ensuring the vehicle remains stable and the jack is not shifting.
5. Reach Desired Height: Once the vehicle reaches the desired height, close the green air inlet valve completely.
6. التثبيت باستخدام حوامل الرفع: Immediately place appropriate jack stands under the vehicle's designated support points. Lower the vehicle onto the jack stands by slightly opening the red valve until the vehicle rests securely on the stands.

5.2. إنزال المركبة

1. ارفع قليلاً: If the vehicle is on jack stands, use the air jack to lift the vehicle slightly off the jack stands.
2. إزالة دعامات الرفع: قم بإزالة دعامات الرفع من أسفل السيارة بحرص.
3. Open Red Valve: Slowly open the red air release valve to gradually deflate the airbags and lower the vehicle. Control the rate of descent by adjusting how much the valve is opened.
4. خفض كامل: Continue to lower the vehicle until it is fully on the ground.
5. إزالة جاك: Once the vehicle is fully lowered and stable, remove the air jack.

Image 5.1: A visual guide to the effortless operation of the VEVOR Air Jack, showing the three steps: 1. Close red valve, open green valve to inflate. 2. Turn off green valve when inflated. 3. Open red valve to bleed air and lower.

Image 5.2: A comparison showing the VEVOR Air Jack before inflation (compact) and after inflation (extended), illustrating the rapid lifting capability within 5 seconds.

Image 5.3: An illustration detailing the minimum height (6.3 inches / 16 cm) and maximum height (15.75 inches / 40 cm) of the VEVOR Air Jack, along with arrows indicating the lifting motion.

6. الصيانة

Regular maintenance ensures the longevity and safe operation of your VEVOR Pneumatic Air Jack:

• تنظيف: After each use, wipe down the jack with a clean, dry cloth to remove dirt, grease, and debris. Avoid using harsh chemicals that could damage rubber components.
• تقتيش: Periodically inspect the airbags for cuts, punctures, or signs of wear. Check all connections, hoses, and valves for leaks or damage. Ensure the handle and wheels are securely attached and functioning correctly.
• مزود الهواء: Ensure your air compressor system includes a moisture trap to prevent water from entering the jack, which can cause internal corrosion.
• تخزين: Store the air jack in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully deflated before storage.
• تشحيم: Lightly lubricate moving parts, such as wheel axles, if necessary, with a suitable lubricant.

7. استكشاف الأخطاء وإصلاحها

يرجى الرجوع إلى الجدول التالي للتعرف على المشكلات الشائعة وحلولها:

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact VEVOR customer support.

8. المواصفات

Technical specifications for the VEVOR 5T Pneumatic Air Jack:

Image 8.1: A visual representation of the VEVOR Air Jack with key dimensions (height, width, length) and product weight, alongside exampعدد قليل من المركبات المتوافقة.

9. الضمان والدعم

VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official VEVOR webموقع.

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact VEVOR customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (Cric Pneumatico ad Aria) and ASIN (B08HLRYM7L) ready.