ECTY 1162

ECTY LED Color Changing Rope Light User Manual

Model: 1162 | Brand: ECTY

المنتج انتهىview

The ECTY LED Color Changing Rope Light is a versatile lighting solution designed for both indoor and outdoor use. This 18-foot rope light features 180 multicolor LEDs, offering a vibrant array of lighting options. It comes equipped with a remote control for convenient adjustment of its 8 distinct color settings and various animation modes.

  • 180 multicolor LED lights for dynamic illumination.
  • 8 distinct color settings to suit any mood or occasion.
  • Convenient remote control included for easy operation.

محتويات الحزمة

يرجى التأكد من وجود كافة العناصر قبل متابعة التثبيت:

  • 1 x 18 ft LED Rope Light
  • 1 x Remote Control (CR2025 Battery Included)
  • 1 × 2 قدم سلك الطاقة
  • 16 x Mounting Clips and Screws
  • 1 × دليل التعليمات

دليل الإعداد

Follow these steps to set up your ECTY LED Color Changing Rope Light:

  1. Unpack the Rope Light: Carefully remove the rope light and all accessories from the packaging.
  2. Uncoil Completely: Before plugging in, fully uncoil the rope light to prevent overheating and ensure proper operation.
  3. اختيار موقع: Select a suitable location for installation. While rated for indoor/outdoor use, ensure the environment is within the specified temperature range (greater than -18°C / 0°F).
  4. التركيب (اختياري): Use the provided mounting clips and screws to secure the rope light in your desired position. Ensure the light is securely fastened to prevent accidental falls.
  5. توصيل الطاقة: Connect the 2 ft power cord to the rope light and then plug it into a standard 120V/60Hz electrical receptacle.
ECTY LED Color Changing Rope Light in its packaging, showing the coiled light and remote control.

This image displays the ECTY LED Color Changing Rope Light, coiled within its retail packaging. The remote control is also visible, highlighting the product's key features.

تعليمات التشغيل

Your ECTY LED Rope Light is controlled by the included remote. Ensure the remote's battery (CR2025) is properly installed.

وظائف التحكم عن بعد:

  • تشغيل/إيقاف التشغيل: استخدم قوة زر لتشغيل أو إطفاء الأنوار.
  • اختيار اللون: Press the colored buttons (Red, Green, Blue, White, Yellow, Cyan, Purple, Orange) to select a solid color.
  • ضبط السطوع: استخدم سطوع أعلى / أسفل أزرار لزيادة أو تقليل شدة الإضاءة.
  • Animation Modes: Cycle through various pre-programmed animation modes (e.g., Flash, Strobe, Fade, Smooth) using the dedicated mode buttons.
  • التحكم في السرعة: Adjust the speed of animation modes using the Speed Up/Down أزرار.
Back of the ECTY LED Color Changing Rope Light packaging, showing product contents and warnings.

The back of the product packaging is shown, detailing the contents including the 18ft rope light, power cord, mounting clips, screws, and remote control. Important safety warnings and electrical specifications are also listed.

صيانة

To ensure the longevity and optimal performance of your rope light, follow these maintenance guidelines:

  • تنظيف: Gently wipe the rope light with a soft, damp cloth to remove dust or dirt. Do not use harsh chemicals or abrasive cleaners. Ensure the light is unplugged before cleaning.
  • تخزين: When not in use for extended periods, coil the rope light neatly and store it in a cool, dry place away from direct sunlight and extreme temperatures.
  • تقتيش: Periodically inspect the rope light and power cord for any signs of damage, such as cuts, fraying, or exposed wires. Discontinue use if any damage is found.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your ECTY LED Color Changing Rope Light, refer to the following common solutions:

مشكلةالسبب المحتمل / الحل
الأضواء لا تعمل.
  • تأكد من توصيل سلك الطاقة بشكل آمن بمنفذ العمل.
  • Check if the remote control battery (CR2025) needs replacement.
  • Verify the power button on the remote has been pressed.
جهاز التحكم عن بعد لا يستجيب.
  • Point the remote directly at the sensor on the rope light's power unit.
  • استبدل بطارية CR2025 في جهاز التحكم عن بعد.
  • Ensure there are no obstructions between the remote and the sensor.
بعض مصابيح LED لا تضيء.
  • This may indicate internal damage. Discontinue use and contact customer support.

المواصفات الفنية

ميزةالتفاصيل
رقم الموديل1162
ماركةإكتي
نوع الضوءحبل ضوء LED
طول18 قدم (5.48 متر)
عدد المصابيح LED180
إعدادات الألوان8 (Multicolor)
مصدر الطاقةكهرباء سلكية
المجلدtage120 فولت / 60 هرتز
واتtage18 واط
نوع وحدة التحكمجهاز التحكم عن بعد
البطارية عن بعدCR2025 (مضمن)
الاستخدام الداخلي والخارجيداخلي
مادةبلاستيك
وزن العنصر1.83 رطل
أبعاد المنتج4 × 9 × 8 بوصة
رمز المنتج الموحد840072812206

Note: This device is not intended for use with emergency exits. For use in environments greater than -18°C / 0°F.

الضمان والدعم

This ECTY LED Color Changing Rope Light comes with a ضمان محدود لمدة عامين من تاريخ الشراء. يغطي هذا الضمان عيوب التصنيع والتصنيع في ظل الاستخدام العادي.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ECTY customer support. Refer to the product packaging or the manufacturer's webالموقع للحصول على أحدث معلومات الاتصال.

معلومات هامة حول السلامة:

  • خطر الصدمة الكهربائية: قم بإيقاف تشغيل الطاقة قبل الفحص أو التثبيت أو الإزالة.
  • لا تفتح - لا توجد أجزاء يمكن للمستخدم صيانتها بالداخل.
  • تحذير بطارية الزر: يحتوي هذا المنتج على بطارية زر. في حالة ابتلاعها، قد تتسبب في إصابة خطيرة أو الوفاة في غضون ساعتين فقط. اطلب العناية الطبية على الفور.

© 2024 ECTY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.