FMS Pitts V2 1400mm RC Aerobatic Biplane

1. المقدمة

The FMS Pitts V2 1400mm RC Aerobatic Biplane is a high-performance remote control aircraft designed for aerobatic maneuvers. Built with robust EPO foam, it features a powerful 4258 brushless motor, 50A Hobbywing ESC, and responsive 17g servos, ensuring precise control and exhilarating flight. Its design includes authentic detailing and a large battery bay for extended flight times.

Image: The FMS Pitts V2 1400mm RC Aerobatic Biplane in a dynamic flight pose.

2. معلومات السلامة

Always operate your RC aircraft in a safe and responsible manner. Failure to do so may result in injury or damage to property. Please observe the following safety guidelines:

• اقرأ الدليل كاملا: Familiarize yourself with all product features and operating instructions before use.
• توصية العمر: يوصى بهذا المنتج للمستخدمين الذين تبلغ أعمارهم 14 عامًا فأكثر.
• منطقة الرحلة: Fly in open areas away from people, buildings, and other obstacles. Avoid flying near power lines or busy roads.
• حالة الطقس: لا تطير في ظل الرياح القوية أو الأمطار أو الظروف الجوية السيئة الأخرى.
• فحص ما قبل الرحلة: قم دائمًا بإجراء فحص شامل قبل الرحلة للتأكد من أن جميع المكونات مثبتة بإحكام وتعمل بشكل صحيح.
• سلامة البطارية: Use only recommended batteries and chargers. Follow all battery charging and handling instructions to prevent fire or injury.
• سلامة المروحة: Keep hands, face, and loose clothing away from the rotating propeller.
• الحفاظ على السيطرة: If you lose control of the aircraft, immediately reduce throttle and attempt to regain control.

3. ماذا يوجد في الصندوق

The FMS Pitts V2 1400mm PNP (Plug and Play) package includes the following components:

• FMS Pitts V2 1400mm Airframe (fuselage, wings, tail sections)
• 4258 Brushless Motor (pre-installed)
• 50A Hobbywing-sourced Electronic Speed Controller (ESC) (pre-installed)
• 17g Servos (pre-installed, 4x)
• المروحة
• معدات الهبوط
• دعامات الجناح
• Small parts for assembly (screws, pushrods, etc.)

Note: This PNP version does NOT include a battery, radio transmitter, or charger.

Image: All components of the FMS Pitts V2 1400mm laid out for assembly.

4. الإعداد والتجميع

The FMS Pitts V2 features an ingeniously designed screw-together mechanism for swift and hassle-free assembly. Follow these steps:

1. فك مكونات الحزمة: Carefully remove all airplane components from the packaging.
2. Attach Wings: Securely attach the wings to the fuselage using the provided screw-together mechanism. Ensure proper alignment.
3. Install Wing Struts: Slide the wing struts onto the wings and secure them in place.
4. تركيب معدات الهبوط: قم بتثبيت عجلات الهبوط على جسم الطائرة.
5. Install Propeller: Mount the propeller onto the motor shaft.
6. Install Receiver & Speed Control: If not pre-installed, install your receiver and speed control.
7. توصيل المحركات المؤازرة: Connect the pre-installed servos to your receiver according to your radio system's instructions.
8. أدخل البطارية: Place your 6S battery (not included) into the oversized battery compartment. Ensure it is secured to prevent shifting during flight.
9. مركز الثقل (CG): Verify the aircraft's Center of Gravity (CG) is within the recommended range (refer to specifications section). Adjust battery position if necessary.
10. إعداد الراديو: Bind your radio transmitter to the receiver and set up control throws as recommended by your radio system's manual.

الصورة: عن قرب view of the 4258 brushless motor, 50A Hobbywing ESC, and 17g servos.

5. تعليمات التشغيل

The FMS Pitts V2 is designed for high-powered aerobatic performance. Its robust EPO construction ensures durability, while authentic detailing enhances the flying experience.

فحوصات ما قبل الرحلة:

• تأكد من شحن البطارية بالكامل وتثبيتها بشكل آمن.
• Check all control surfaces (ailerons, elevator, rudder) for free movement and correct direction.
• تأكد من أن المروحة مثبتة بإحكام وغير تالفة.
• Confirm radio signal strength and range.

اخلع:

Position the aircraft into the wind on a clear runway. Gradually increase throttle to full, applying slight up-elevator as needed for a smooth lift-off. The powerful motor will provide ampقوة الدفع اللازمة للإقلاع السريع.

رحلة جوية:

The Pitts V2 is highly maneuverable, capable of a wide range of aerobatic stunts. Its responsive 17g servos allow for precise control. Practice basic maneuvers before attempting advanced aerobatics. The large capacity battery bay accommodates powerful 6S packs for extended flight times.

الهبوط:

Approach the runway into the wind. Gradually reduce throttle and maintain a controlled descent. Apply slight up-elevator just before touchdown for a soft landing. The robust landing gear is designed to handle various landing conditions.

Images: Various dynamic flight shots of the FMS Pitts V2 1400mm RC Biplane.

فيديو المنتج الرسمي:

6. الصيانة

Regular maintenance will ensure the longevity and optimal performance of your FMS Pitts V2.

• تنظيف: After each flight, wipe down the aircraft with a soft, dry cloth to remove dirt, dust, or moisture.
• تقتيش: Regularly inspect the airframe for any cracks, dents, or damage to the EPO foam. Check control surfaces, hinges, and pushrods for wear or looseness.
• المروحة: Inspect the propeller for nicks, cracks, or bends. Replace if damaged to ensure balanced flight and prevent motor strain.
• Motor & ESC: Ensure the motor spins freely and the ESC connections are secure. Avoid overheating the motor and ESC.
• الماكينات: Check servos for smooth operation and ensure they are securely mounted.
• العناية بالبطارية: Store batteries in a cool, dry place. Do not overcharge or over-discharge LiPo batteries.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your FMS Pitts V2, refer to the following common problems and solutions:

8. المواصفات

Image: Detailed specifications table for the FMS Pitts V2 1400mm.

9. الضمان والدعم

FMS is committed to providing quality products and support. For any inquiries or issues, please refer to the following:

• سياسة العائدات: يخضع هذا المنتج لسياسة استرداد/استبدال لمدة 30 يومًا.
• عبوة تالفة: If your package was damaged during shipping, please contact FMS support immediately. Keep all packing material and original boxes. Provide photos of the damaged product and box.
• Wrong Product Received: If you received the wrong product, contact FMS support. Keep all packing material and original boxes. The incorrect item must be returned new and unused (FMS will cover return shipping).
• الشركة المصنعة: نموذج FMS
• متجر العلامة التجارية: قم بزيارة متجر FMS على أمازون لمزيد من المنتجات والدعم.