مقدمة
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
معلومات السلامة
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool.
السلامة الكهربائية
- Ensure the power cord is compatible with the power source and is properly grounded.
- تجنب ملامسة الجسم للأسطح الأرضية مثل الأنابيب والرادياتير والمجالات والثلاجات.
- لا تعرض الأدوات الكهربائية للمطر أو الظروف الرطبة. إن دخول الماء إلى الأداة الكهربائية من شأنه أن يزيد من خطر التعرض لصدمة كهربائية.
- لا تفرط في استخدام السلك. لا تستخدم السلك مطلقًا لحمل أو سحب أو فصل الأداة الكهربائية. احفظ السلك بعيدًا عن الحرارة أو الزيت أو الحواف الحادة أو الأجزاء المتحركة.
السلامة الشخصية
- ارتدِ دائمًا حماية للعين (نظارات السلامة أو النظارات الواقية) وحماية للسمع.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- كن متيقظًا، وانتبه لما تفعله، واستخدم الحس السليم عند تشغيل أداة كهربائية.
- لا تفرط في التمدد. حافظ على التوازن والثبات في جميع الأوقات.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
عناصر
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- مضخة غاطسة المياه
- عموم المياه
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- شفرة وجع
- عرافة وجع
يثبت
Proper setup is crucial for safe and accurate operation.
1. تجميع الحامل
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
الشكل 2: من أعلى إلى أسفل view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. املأ خزان المياه
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
فيديو 1: أكثر منview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
تعليمات التشغيل
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- Rip Cuts: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- قطع المتراس: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. إجراء عملية قطع
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- شغّل المنشار. دع الشفرة تصل إلى أقصى سرعة لها قبل البدء بالقطع.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
صيانة
Regular maintenance ensures the longevity and performance of your tile saw.
1. التنظيف
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. العناية بالشفرة
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- احفظ الشفرات بشكل صحيح لمنع تلفها.
3. التفتيش العام
- قم بفحص جميع أدوات الربط بشكل دوري للتأكد من إحكامها.
- افحص سلك الطاقة بحثًا عن أي علامات تلف.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
استكشاف الأخطاء وإصلاحها
يتناول هذا القسم المشكلات الشائعة التي قد تواجهها.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| المنشار لا يبدأ | لا يوجد طاقة، مفتاح معيب، قاطع الدائرة معطل | Check power connection, test outlet, reset breaker, contact service if switch is faulty. |
| Blade not cutting efficiently or chipping tiles | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| قطع غير دقيقة | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
تحديد
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- رقم الموديل: D36000S
- مصدر الطاقة: كهرباء سلكية
- المحرك: 15 Amp, 1220 MWO
- المجلدtage: 120 فولت
- واتtage: 1800 واط
- سرعة: 4200 دورة في الدقيقة
- قطر الشفرة: 10 بوصة
- قدرة القطع الطولي: 37 inches (41 inches with plunge)
- Crosscut Capacity: 8-1/2 بوصة
- دقة: 1/32 inch over 30 inches
- وزن السلعة: 91 رطل
- أبعاد العنصر (الطول × العرض × الارتفاع): 36 بوصة طول × 31 بوصة عرض × 28.75 بوصة ارتفاع
- مادة الشفرة: Stainless Steel (for included blade)
- توصية السطح: الخزف
- المميزات الخاصة: Brake, Integrated storage, Water tray system
- شهادة: UL
الضمان والدعم
للحصول على معلومات الضمان أو الخدمة أو الدعم الفني، يرجى الرجوع إلى موقع ديوالت الرسمي. webالموقع أو تواصل مع خدمة عملاء دي والت مباشرةً. احتفظ بإيصال الشراء كإثبات للشراء في حال وجود أي مطالبات بالضمان.