POOLEX PC-SLP200N

دليل مستخدم مضخة الحرارة POOLEX POOLSTAR Silverline Inverter 210

Model: PC-SLP200N

العلامة التجارية: POOLEX

1. المقدمة

Thank you for choosing the POOLEX POOLSTAR Silverline Inverter 210 Heat Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pool heat pump. Designed for pools up to 110 m³, this unit features a multi-frequency compressor and variable fan for optimal performance and quiet operation, along with Wi-Fi connectivity for convenient control.

2. معلومات السلامة

WARNING: Read all safety warnings and instructions carefully before installing or operating this appliance. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

  • Ensure the heat pump is installed by a qualified technician in accordance with local electrical and plumbing codes.
  • افصل دائمًا الطاقة عن الوحدة قبل إجراء أي صيانة أو خدمة.
  • لا تقم بتشغيل المضخة الحرارية إذا كان أي جزء منها تالفًا أو إذا كان سلك الطاقة مهترئًا.
  • احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن الوحدة أثناء التشغيل.
  • تأكد من التهوية المناسبة حول الوحدة لمنع ارتفاع درجة الحرارة.
  • لا تقم بسد فتحات سحب الهواء أو فتحات العادم.
  • This appliance is designed for heating pool water only. Do not use for other purposes.

3. محتويات العبوة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

  • POOLEX POOLSTAR Silverline Inverter 210 Heat Pump Unit
  • Anti-vibration Support Kit (4 pieces)
  • PVC Connectors (Ø 50mm 1" ½)
  • خرطوم تصريف المكثفات
  • Wired Control Extension Cable (10m)
  • User Manual and Documentation Folder
  • Protective Cover (for storage/protection)
POOLEX POOLSTAR Silverline Inverter 210 Heat Pump Unit

POOLEX Silverline Inverter 210 Heat Pump

Anti-vibration Support Kit

Anti-vibration Supports

PVC Connectors

PVC Connectors

خرطوم تصريف المكثفات

خرطوم تصريف المكثفات

Wired Control Extension Cable

Wired Control Extension Cable

غطاء حماية

غطاء حماية

User Manual and Documentation Folder

User Manual Folder

4. الإعداد

4.1. تحديد مستوى

  • Choose a well-ventilated outdoor location, away from direct sunlight and heat sources.
  • Ensure sufficient clearance around the unit for proper airflow (refer to specific distances in the detailed manual).
  • Place the unit on a solid, level surface. Use the provided anti-vibration supports to minimize noise and vibration.

4.2. توصيلات المياه

  • Connect the heat pump to your pool's filtration system using the supplied PVC connectors (Ø 50mm 1" ½).
  • تأكد من أن جميع الوصلات محكمة الإغلاق لمنع التسرب.
  • Install the condensate drain hose to direct condensed water away from the unit's base.

4.3. التوصيلات الكهربائية

  • Electrical installation must be performed by a certified electrician.
  • Ensure the power supply matches the specifications of the heat pump (refer to the rating label on the unit).
  • Connect the wired control extension cable if you wish to relocate the LED control panel up to 10 meters away from the main unit.

5. تعليمات التشغيل

5.1. بدء التشغيل الأولي

  1. تأكد من أن مضخة المسبح تعمل وأن الماء يتدفق عبر المضخة الحرارية.
  2. قم بتشغيل مصدر الطاقة لمضخة الحرارة.
  3. ستقوم الوحدة بإجراء فحص ذاتي.

5.2. تحديد درجة الحرارة

  • Use the LED control panel to set your desired pool water temperature.
  • The heat pump will automatically adjust its operation to reach and maintain the set temperature.

5.3. اتصال واي فاي

  • Download the dedicated POOLEX application on your smartphone.
  • Follow the in-app instructions to connect your heat pump to your home Wi-Fi network.
  • Once connected, you can monitor and control your heat pump remotely from your smartphone.

6. الصيانة

6.1. التنظيف المنتظم

  • نظف الجزء الخارجي من الوحدة بشكل دوري بقطعة قماش ناعمة.amp قطعة قماش.
  • Ensure the air intake and exhaust grilles are free from debris (leaves, dirt, etc.).

6.2. Water Flow Check

  • Regularly check the pool filter and pump to ensure adequate water flow to the heat pump. Reduced flow can impact performance.

6.3. تجهيز المنزل لفصل الشتاء

  • Before freezing temperatures, drain all water from the heat pump and plumbing lines to prevent damage.
  • افصل مصدر الطاقة.
  • Cover the unit with the provided protective cover for off-season storage.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues, refer to the table below for common problems and solutions. For complex issues, contact customer support.

مشكلةالسبب المحتملحل
مضخة الحرارة لا تعمللا يوجد مصدر طاقة؛ تعطل قاطع الدائرةتحقق من توصيل الطاقة؛ أعد ضبط قاطع الدائرة
Low heating performanceInsufficient water flow; Dirty coils; Ambient temperature too lowCheck pool pump and filter; Clean unit coils; Operate within recommended temperature range
ضوضاء غير عاديةLoose components; Debris in fan; Unit not levelInspect for loose parts; Clear debris; Ensure unit is level and anti-vibration supports are used
مشاكل اتصال Wi-FiIncorrect password; Router too far; App issuesVerify Wi-Fi password; Move router closer or use extender; Reinstall app

8. المواصفات

ميزةمواصفة
رقم الموديلPC-SLP200N
الأبعاد (الطول × العرض × الارتفاع)110.4 × 33.4 × 75.6 سم
وزن25 كجم
حجم المسبح الموصى به80 - 110 متر مكعب
نوع الضاغطMulti-frequency (Mitsubishi)
المبادل الحراريTwisted Tech (Titanium coil)
الاتصالWi-Fi, Wired Control Panel (10m extension)
COP (26°C/26°C)حتى 16

9. الضمان والدعم

POOLEX is committed to your satisfaction. For warranty information, please refer to the documentation included with your product or visit the official POOLEX website. In case of technical issues or questions, please contact POOLEX customer service.

Please note that information regarding spare parts availability is not readily available. For any spare parts inquiries, please contact POOLEX customer support directly.

لمزيد من المساعدة، يرجى زيارة: www.poolex.fr

© 2024 POOLEX. جميع الحقوق محفوظة.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.