Homra Nexo 72L Sensor Waste Separation System

1. انتهى المنتجview

The Homra Nexo 72L Sensor Waste Separation System is designed for efficient waste management with its multi-compartment structure and automatic sensor lid. This manual provides essential information for the proper setup, operation, and maintenance of your waste separation system.

Image 1.1: Homra Nexo 72L Waste Separation System

2. تعليمات الإعداد

2.1 فك الصندوق والفحص

• قم بإزالة جميع المكونات بعناية من العبوة.
• Verify that all parts are present and undamaged. Refer to the packing list for a complete inventory.

2.2 تركيب البطارية

The sensor lid requires 6 AA batteries for operation. Ensure correct polarity when inserting the batteries.

1. حدد موقع حجرة البطارية على الجانب السفلي من الغطاء.
2. افتح غطاء حجرة البطارية.
3. قم بإدخال 6 بطاريات AA، مع مراعاة علامات القطبية (+/-).
4. أغلق غطاء حجرة البطارية جيدًا.

2.3 التنسيب

Position the waste separation system on a flat, stable surface. The unit is suitable for various indoor environments such as kitchens, living rooms, or offices.

Image 2.1: Anti-slip feet ensure stability

3. تعليمات التشغيل

3.1 Sensor Lid Operation (Upper Compartment)

The large upper compartment features an automatic sensor lid for hygienic, touch-free operation.

1. To open the lid, place your hand approximately 10-15 cm above the sensor located on the front of the lid.
2. سيتم فتح الغطاء تلقائيًا.
3. After a few seconds of inactivity, the lid will close automatically.
4. For manual control, use the 'OPEN' and 'CLOSE' buttons next to the sensor. Press 'OPEN' to keep the lid open, and 'CLOSE' to close it.

Image 3.1: Sensor and manual control buttons

Image 3.2: Hands-free sensor operation

3.2 Lower Compartment Operation

The lower compartment can be opened manually by pulling the drawer handle. It is equipped with wheels for smooth operation.

3.3 Waste Separation

The system is designed for efficient waste separation with multiple compartments:

• Upper Compartment (48 Litres): Ideal for general waste or recyclables. An inner ring secures the garbage bag in place. A 4-litre collection tray for green waste can be used here.
• Lower Compartment (2 x 12 Litres): Contains two separate inner containers, suitable for different types of recyclables such as plastic, paper, or glass. These containers are designed for standard 15-litre rubbish bags.

Image 3.3: Multi-compartment design for waste separation

Image 3.4: Soft-close lid mechanism

4. الصيانة

4.1 التنظيف

The Homra Nexo is made from dirt-repellent and fingerprint-proof stainless steel, making it easy to clean.

• امسحي الجزء الخارجي بقطعة قماش ناعمة.amp قطعة قماش ومنظف خفيف.
• تجنب استخدام المنظفات الكاشطة أو المواد الكيميائية القاسية، لأنها قد تتلف الطبقة النهائية.
• The inner bins can be removed and washed with soap and water. Ensure they are completely dry before placing them back into the unit.

Image 4.1: Fingerprint-free stainless steel finish

4.2 استبدال البطارية

If the sensor lid becomes unresponsive or slow, it may be time to replace the batteries. Follow the steps in Section 2.2 for battery installation.

5. استكشاف الأخطاء وإصلاحها

• Lid not opening/closing automatically:
  • تأكد من تركيب البطاريات بشكل صحيح وأنها مشحونة بشكل كافٍ. استبدل البطاريات إذا لزم الأمر.
  • Ensure there are no obstructions blocking the sensor or the lid's movement.
  • نظف منطقة المستشعر لإزالة أي غبار أو شوائب.
• Lid making unusual noises:
  • Ensure the lid mechanism is clean and free from debris.
  • Do not force the lid open or closed manually when the sensor is active.
• Lower drawer not sliding smoothly:
  • Check for any debris or obstructions under the wheels.
  • تأكد من أن الوحدة على سطح مستو.

6. المواصفات

Image 6.1: Product Dimensions and Capacities

7. الضمان والدعم

For warranty information or technical support, please contact the manufacturer, Homra, or your retailer. Keep your purchase receipt as proof of purchase.