Kamoer FX-STP2 Peristaltic Dosing Pump User Manual

1. المقدمة

The Kamoer FX-STP2 is a continuous-duty peristaltic dosing pump designed for precise liquid dispensing in various applications, particularly aquariums. It features an adjustable flow rate from 1 to 120 ml/min and WiFi connectivity for remote control and monitoring. This manual provides essential information for the safe and efficient operation of your FX-STP2 pump.

Figure 1: Kamoer FX-STP2 Peristaltic Dosing Pump. This image shows the compact design of the pump with its control panel and tubing connections.

2. معلومات السلامة

• Read all instructions before operating the pump.
• Ensure the power supply matches the pump's requirements (specified on the label).
• Do not immerse the pump in water or expose it to excessive moisture.
• أبقِ المضخة بعيدة عن مصادر الحرارة وأشعة الشمس المباشرة.
• Only use original or approved replacement parts, especially for the peristaltic tubing.
• افصل الطاقة قبل إجراء أي صيانة أو تنظيف.
• This device is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• Kamoer FX-STP2 Peristaltic Dosing Pump
• محول الطاقة
• Peristaltic Tubing (pre-installed or spare)
• Tubing Connectors/Holders
• دليل المستخدم (هذا المستند)

4. انتهى المنتجview

The FX-STP2 pump utilizes peristaltic technology to deliver a continuous, non-pulsating flow of liquid. Its compact design and quiet operation make it suitable for various environments. Key features include:

• معدل التدفق القابل للتعديل: Precisely control dosing from 1 ml/min to 120 ml/min.
• Continuous Dosing: Ideal for applications requiring constant liquid delivery, such as calcium reactors or gradual water changes.
• التشغيل الهادئ: Engineered for minimal noise output.
• معايرة سهلة: Simple process to ensure accurate dosing.
• نسخة إحتياطية للذاكرة: Retains settings after power loss.
• أنابيب متينة: Equipped with long-life PharMed tubing.
• اتصال واي فاي: Allows for remote control and monitoring via a dedicated application.

5. الإعداد

5.1 التثبيت المادي

1. الموقع: Position the pump on a stable, dry surface, ensuring adequate ventilation.
2. اتصال الأنابيب: Connect the inlet tubing to your liquid source and the outlet tubing to your destination (e.g., aquarium, reactor). Ensure tubing is securely fastened to prevent leaks.
3. توصيل الطاقة: Connect the power adapter to the pump and then plug it into a suitable electrical outlet.

Figure 2: Tubing connections on the Kamoer FX-STP2. This image illustrates the proper way to connect inlet and outlet tubing to the pump ports.

5.2 WiFi Connection (If Applicable)

Refer to the separate Kamoer app manual for detailed instructions on connecting your FX-STP2 to your home WiFi network and configuring it via the mobile application. This typically involves downloading the Kamoer app, creating an account, and following the in-app pairing process.

6. تعليمات التشغيل

6.1 بدء التشغيل الأولي

Once powered on, the pump will typically display its current status. If connected via WiFi, you can control it through the Kamoer app. Manual controls may also be available on the unit itself for basic functions.

6.2 ضبط معدل التدفق

The flow rate can be adjusted from 1 ml/min to 120 ml/min. This adjustment is primarily done through the Kamoer mobile application. Navigate to the pump's settings within the app and use the interface to set your desired flow rate. The pump will begin dosing at the new rate immediately.

6.3 المعايرة

Regular calibration ensures accurate dosing. To calibrate:

1. Place the outlet tubing into a measuring cylinder.
2. Initiate the calibration process via the Kamoer app (or pump controls if available).
3. The pump will dispense a set volume (e.g., 100 ml).
4. Measure the actual volume dispensed and enter this value into the app.
5. The pump will adjust its internal settings for improved accuracy.

Figure 3: Kamoer FX-STP2 control interface. This image shows the digital display and buttons for manual control and calibration.

7. الصيانة

7.1 Tubing Replacement

The PharMed peristaltic tubing has a long lifespan but will eventually require replacement due to wear. Signs of wear include reduced flow accuracy, leaks, or visible damage to the tubing.

1. فصل الطاقة: Always unplug the pump before servicing.
2. Access Pump Head: Open the pump head cover (refer to diagrams in the app or product documentation if unsure).
3. إزالة الأنابيب القديمة: Carefully detach the old tubing from its connectors and rollers.
4. تركيب أنابيب جديدة: Insert the new PharMed tubing, ensuring it is correctly seated within the pump head and secured by the rollers.
5. Close Pump Head: Securely close the pump head cover.
6. إعادة المعايرة: After replacing tubing, it is recommended to recalibrate the pump for optimal accuracy.

Figure 4: Replacing peristaltic tubing in the Kamoer FX-STP2. This image demonstrates the process of opening the pump head and installing new tubing.

7.2 التنظيف

امسح الجزء الخارجي من المضخة بقطعة قماش ناعمة.amp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the internal components.

8. استكشاف الأخطاء وإصلاحها

9. المواصفات

10. الضمان والدعم

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Kamoer webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.

الموارد المتاحة على الإنترنت: Kamoer Official Store on Amazon

11. مقاطع فيديو المنتج

No official seller-created product videos were found for this model at this time. Please refer to the written instructions and diagrams for guidance.