Artillery Hornet 3D Printer User Manual

1. المقدمة

Welcome to the Artillery Hornet 3D Printer User Manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new 3D printer. The Artillery Hornet is designed for ease of use and high-quality printing, featuring a highly pre-assembled structure and advanced components for reliable performance.

2. معلومات السلامة

• قم بتشغيل الطابعة دائمًا في منطقة جيدة التهوية.
• احتفظ بيديك بعيدًا عن الأجزاء المتحركة أثناء التشغيل.
• Do not touch the hotend or heated bed during or immediately after printing, as they can reach high temperatures.
• تأكد من توصيل مصدر الطاقة وتأريضه بشكل صحيح.
• Unplug the printer from the power source before performing any maintenance or cleaning.
• أبقِ الطابعة بعيدة عن المواد القابلة للاشتعال وأشعة الشمس المباشرة.
• راقب الأطفال والحيوانات الأليفة أثناء تشغيل الطابعة.

3. محتويات العبوة

عند فتح الصندوق، يرجى التأكد من وجود جميع المكونات:

• Artillery Hornet 3D Printer (95% pre-assembled)
• حامل بكرة خيوط
• كابل الطاقة
• كابل يو اس بي
• Tool Kit (wrenches, screwdrivers, etc.)
• SD Card with Test Files and Software
• دليل المستخدم (هذا المستند)
• Sampلو خيوط

4. انتهى المنتجview

The Artillery Hornet features a robust metal integrated structure and a sleek design. Key components include:

الشكل 4.1: بشكل عام view of the Artillery Hornet 3D Printer.

Figure 4.2: Close-up of the innovative integrated cabling system, designed to prevent cable dangling and ensure a neat setup.

Figure 4.3: Details of the New Titan Extruder and Modular Hotend, crucial for stable and precise filament feeding and melting.

Figure 4.4: The self-developed 32-bit motherboard with replaceable drivers, enabling ultra-silent printing and enhanced performance.

Figure 4.5: The user-friendly one-key knob integrated switch for easy operation and the adjustable filament holder designed to maintain a low center of gravity.

5. دليل الإعداد

The Artillery Hornet is designed for quick and easy assembly, being 95% pre-assembled. Follow these steps to complete the setup:

Figure 5.1: The printer arrives 95% pre-assembled, requiring only a few minutes for final setup.

1. فك التعبئة: قم بإزالة جميع المكونات بعناية من العبوة.
2. Attach Gantry: Secure the pre-assembled gantry to the base unit using the provided screws. The integrated cabling simplifies this connection.
3. Install Filament Holder: Mount the adjustable filament holder to the designated slot on the side of the printer.
4. توصيل الطاقة: Plug the power cable into the printer and then into a grounded electrical outlet.
5. تشغيل الطاقة: Flip the power switch located at the rear of the base unit.
6. Bed Leveling: Perform manual bed leveling as instructed on the printer's display or in the detailed guide on the included SD card. Proper bed leveling is crucial for successful prints.

6. تعليمات التشغيل

Operating the Artillery Hornet is intuitive, thanks to its one-key knob integrated switch and efficient design.

6.1. تحميل الخيوط

1. Place your filament spool onto the adjustable filament holder.
2. Feed the filament through the filament sensor and into the Titan Extruder.
3. Heat the hotend to the appropriate temperature for your filament type (e.g., 200°C for PLA).
4. Use the one-key knob to select the 'Load Filament' option. The extruder will automatically pull the filament through the hotend until it extrudes smoothly.

6.2. بدء الطباعة

1. Prepare your 3D model using a slicing software (e.g., Cura, PrusaSlicer) and save it as a G-code file على بطاقة SD.
2. Insert the SD card into the printer's SD card slot.
3. Navigate the menu using the one-key knob to 'Print from SD' and select your desired G-code file.
4. The printer will automatically heat up the bed and hotend, then begin printing. The self-developed 32-bit motherboard ensures ultra-silent operation during printing.

7. الصيانة

Regular maintenance ensures optimal performance and longevity of your Artillery Hornet 3D Printer.

• تنظيف سطح الطباعة: After each print, clean the print bed with isopropyl alcohol to ensure good adhesion for future prints.
• تنظيف الفوهة: Periodically clean the nozzle to prevent clogs. Use a brass brush or needle to clear any residue.
• قم بتشحيم قضيب المحور Z: Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screw every few months to ensure smooth vertical movement.
• فحص الأحزمة: Inspect the X and Y axis belts for proper tension and wear. Adjust if too loose or replace if damaged.
• تنظيف المروحة: Ensure cooling fans (for hotend, part cooling, and power supply) are free from dust and debris to prevent overheating.

8. استكشاف الأخطاء وإصلاحها

فيما يلي بعض المشكلات الشائعة وحلولها المحتملة:

9. المواصفات

Figure 9.1: Dimensions of the Artillery Hornet 3D Printer.

10. الضمان والدعم

For warranty information and technical support, please refer to the documentation included with your product or visit the official Artillery webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.