Genesis Nitro 950 Gaming Chair User Manual

مقدمة

This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.

معلومات السلامة

• تأكد من وجود جميع المكونات وسلامتها قبل التجميع. لا تستخدم المنتج إذا كان أيٌّ منها مفقودًا أو مكسورًا.
• Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
• لا تقف على الكرسي. استخدمه للجلوس فقط.
• لا تتجاوز الحد الأقصى للوزن وهو 150 كجم (330 رطل).
• أبقِ الأطفال والحيوانات الأليفة بعيدًا أثناء التجميع. قد تُشكّل الأجزاء الصغيرة خطر اختناق.
• افحص جميع البراغي والصواميل بشكل دوري للتأكد من إحكام ربطها. أعد ربطها حسب الحاجة.
• تجنب تعريض الكرسي لأشعة الشمس المباشرة أو درجات الحرارة العالية لمنع تدهور المواد.

محتويات الحزمة

Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:

• قاعدة المقعد
• مسند الظهر
• مساند للذراعين (2)
• القاعدة النجمية
• عجلات (5)
• أسطوانة رفع الغاز
• Gas lift cover
• لوحة الآلية
• وسادة أسفل الظهر
• وسادة مسند الرأس
• مجموعة أدوات (مسامير، غسالات، مفتاح ألين)

الإعداد والتجميع

Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.

1. قم بتثبيت العجلات على القاعدة النجمية: أدخل كل عجلة من العجلات الخمس في الفتحات الموجودة في نهاية أذرع قاعدة النجمة حتى تستقر في مكانها بإحكام.
2. إدراج رفع الغاز: Place the gas lift cylinder into the central hole of the star base. Cover the gas lift with the telescopic plastic cover.
3. Mount Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
4. إرفاق مساند للذراعين: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
5. توصيل المقعد بمسند الظهر: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
6. ضع مجموعة المقعد على رافعة الغاز: قم بوضع المقعد ومسند الظهر المجمعين بعناية على أسطوانة رفع الغاز، مع التأكد من ثباتهما في المنتصف.
7. قم بتركيب الوسائد: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.

تعليمات التشغيل

The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.

1. تعديل ارتفاع المقعد

To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.

2. ضبط إمالة مسند الظهر

The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.

3. ضبط مسند الذراع

The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.

4. Rocker and Locking Function (Frog Mechanism)

The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.

5. Lumbar and Headrest Cushion Positioning

The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.

صيانة

Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.

• تنظيف: امسح بالإعلانamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
• المثبتات: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
• عجلات: Keep casters free of hair, dust, and debris to ensure smooth movement.
• رفع الغاز: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:

تحديد

Detailed specifications for the Genesis Nitro 950 Gaming Chair:

معلومات الضمان

For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.

دعم العملاء

If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis webموقع للحصول على معلومات الاتصال بالدعم.