Axis M7104 Video Encoder User Manual

1. المقدمة

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

الشكل 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. معلومات السلامة

• للاستخدام الداخلي فقط: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• مزود الطاقة: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• تهوية: تأكد من وجود تهوية مناسبة حول الجهاز لمنع ارتفاع درجة حرارته. لا تسد فتحات التهوية.
• التركيب: Mount the device securely on a stable surface or rack.
• تنظيف: Disconnect power before cleaning. Use a dry, soft cloth. Do not use liquid or aerosol cleaners.
• الخدمة: لا تحاول خدمة هذا المنتج بنفسك. قم بإحالة جميع أعمال الصيانة إلى أفراد الخدمة المؤهلين.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• Axis M7104 Video Encoder Unit
• محول الطاقة
• دليل التثبيت / الوثائق
• قوس التثبيت (إن وجد)

4. الإعداد

4.1 الاتصالات المادية

1. Connect Analog Cameras: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. الاتصال بالشبكة: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. توصيل الطاقة: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 التكوين الأولي

After connecting the hardware, you will need to configure the encoder via its web الواجهة:

• اكتشاف الجهاز: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• وصول Web الواجهة: افتح web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: ضمن web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• إعدادات الشبكة: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• يعيش View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web واجهة.
• تسجيل: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• إدارة الفعاليات: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web واجهة أو نظام إدارة الفيديو.
• الوصول عن بعد: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. الصيانة

• تنظيف: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• تحديثات البرامج الثابتة: تحقق بانتظام من شركة أكسيس للاتصالات website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• الظروف البيئية: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7. استكشاف الأخطاء وإصلاحها

المشاكل الشائعة والحلول:

• لا يوجد طاقة:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • تحقق مما إذا كان مأخذ الطاقة يعمل أم لا.
• لا يوجد اتصال بالشبكة:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• لا توجد إشارة فيديو:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Ensure cameras are powered on and functioning correctly.
  • Check video settings in the encoder's web interface for the specific channel.
• لا يمكن الوصول Web الواجهة:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • قم بتعطيل أي جدار حماية أو برنامج مكافحة فيروسات على جهاز الكمبيوتر الخاص بك مؤقتًا والذي قد يمنع الوصول.
  • Try using the Axis IP Utility to rediscover the device.

8. المواصفات

9. الضمان والدعم

للحصول على معلومات مفصلة حول الضمان والدعم الفني وموارد إضافية، يرجى زيارة الموقع الرسمي لشركة Axis Communications. website. You can find product documentation, FAQs, and contact information for customer service.

رسمي Webموقع: www.axis.com

عند الاتصال بالدعم، يرجى تجهيز رقم طراز المنتج (01679-001) والرقم التسلسلي.