1. المقدمة
The Poniie PN1500 is a portable micro electricity usage monitor designed to measure and display various electrical parameters of connected appliances. This device helps users understand their power consumption in real-time, track cumulative energy usage, and identify energy-inefficient devices. It features a clear backlit display, simple operation, and memory retention for recorded data.
2. معلومات السلامة
- Do not exceed the maximum load capacity of 1500W or 14A at 110V. Exceeding these limits can damage the device and connected appliances, and poses a fire hazard.
- Ensure the device is used with a stable power supply within the specified voltagالنطاق الإلكتروني (100 فولت - 140 فولت).
- لا تقم بتفكيك الجهاز أو تعديله. يجب إحالة جميع أعمال الصيانة إلى فنيين مؤهلين.
- احفظ الجهاز بعيدًا عن الماء والرطوبة ودرجات الحرارة القصوى.
- This device is not compatible with solar power inverters.
- Always ensure proper grounding for connected appliances.
- Unplug the device from the wall outlet before cleaning. Clean only with a dry cloth.
3. انتهى المنتجview
3.1 مكونات الجهاز
الشكل 3.1: أمام view of the Poniie PN1500 Electricity Usage Monitor, showing the display, control buttons, and power outlet.
The Poniie PN1500 features a compact design with a large LCD display and intuitive control buttons. The device plugs directly into a standard 110V wall outlet, providing a pass-through outlet for the appliance to be monitored.
3.2 الشاشة والأزرار
الشكل 3.2: مفصل view of the Poniie PN1500 display, illustrating various measurement modes such as Watts, VA, Hz, PF, kWh, Hours, Volts, and Amps. The image also highlights the function of each button.
- شاشة LCD: Shows real-time measurements and cumulative data. Features a backlight for visibility in low-light conditions.
- Watt/VA Button: Toggles between Watts (active power) and VA (apparent power) display.
- Hz/PF/SET Button: Toggles between Frequency (Hz) and Power Factor (PF). Also used for setting parameters or resetting data in combination with the KWH/OK button.
- KWH/OK Button: Toggles between cumulative Kilowatt-hours (kWh) and cumulative elapsed time (Hr). Also used to confirm actions or reset data.
- Volt Button: يعرض المجلد الحاليtagه (الخامس).
- Amp زر: يعرض التيار ampإراج (أ).
4. الإعداد
- Plug in the Monitor: Insert the Poniie PN1500 directly into a standard 110V wall outlet. Ensure it is securely seated.
- توصيل الجهاز: Plug the appliance you wish to monitor into the outlet provided on the front of the PN1500.
- العرض الأولي: The monitor will power on and typically display the current wattage (W) of the connected appliance.
الشكل 4.1: The Poniie PN1500 monitor plugged into a wall outlet, demonstrating its compact size and how it occupies a single outlet.
5. تعليمات التشغيل
5.1 Viewالمعلمات الكهربائية
Press the respective buttons to cycle through or display different electrical parameters:
- يضعط واط/فولت to switch between Watts (W) and VA (Apparent Power).
- يضعط Hz/PF/SET to switch between Frequency (Hz) and Power Factor (PF).
- يضعط فولت to display the current Voltagه (الخامس).
- يضعط Amp لعرض الوضع الحالي Ampإراج (أ).
- يضعط KWH/OK to switch between cumulative Kilowatt-hours (kWh) and cumulative elapsed time (Hr).
الشكل 5.1: The Poniie PN1500 displaying power consumption while monitoring a kitchen kettle, illustrating its use in identifying energy usage.
الشكل 5.2: A collage showing the Poniie PN1500 in use with various household electronics such as a computer setup, lamp, oven, hairdryer, bread maker, television, and space heater, demonstrating its versatility.
5.2 التحكم في الإضاءة الخلفية
The display backlight is typically on by default. To conserve energy or for preference, you can adjust its behavior. A quick press of any measurement button (Watt/VA, Hz/PF/SET, KWH/OK, Volt, Amp) will activate the backlight if it's off. Be aware that pressing a measurement button to activate the backlight will also cycle the display to the next parameter for that button. For example, if the display is showing Watts and the backlight is off, pressing the واط/فولت button will turn on the backlight and switch the display to VA.
5.3 Resetting Cumulative Data
To reset the cumulative Kilowatt-hours (kWh) and elapsed time (Hr) data:
- Ensure the display is showing either kWh or Hr.
- معًا اضغط مع الاستمرار ال Hz/PF/SET الزر ثم مقبض ال KWH/OK زر.
- The cumulative data will reset to zero.
Note: The device retains cumulative data even when unplugged, thanks to its built-in memory.
6. الصيانة
- تنظيف: Disconnect the monitor from the power outlet and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- تخزين: قم بتخزين الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى عندما لا يكون قيد الاستخدام.
- تقتيش: Periodically inspect the device for any signs of damage, such as cracks in the casing or frayed wires. Do not use if damaged.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Display shows "OVERLOAD" | The connected appliance exceeds the maximum wattage (1500 واط) أو amperage (14A) capacity of the PN1500. | Immediately unplug the appliance from the PN1500. Do not use the PN1500 with this appliance. Ensure the appliance's power requirements are within the monitor's specifications. |
| لا يوجد عرض/الجهاز لا يعمل | No power from the wall outlet; device malfunction. | Check if the wall outlet is functional by plugging in another device. Ensure the PN1500 is fully inserted into the outlet. If the problem persists, the device may be faulty. |
| Readings appear inaccurate | Loose connection; appliance drawing very low power; environmental factors. | Ensure all connections are secure. The PN1500 has a start detection of 0.20W, so very low power devices might show minimal or no reading. Compare readings with another known power meter if available. |
| لا تزال الإضاءة الخلفية مضاءة | Backlight auto-off feature is active. | This is normal behavior if the auto-off feature is enabled. Press any measurement button to temporarily illuminate the display. |
8. المواصفات
- نموذج: رقم المنتج 1500
- ماركة: بوني
- مصدر الطاقة: AC (110V nominal, 100V-140V range)
- الحد الأقصى للحمل: 1500W / 14A (at 110V)
- فئة الدقة: 1.0
- دقة: 0.01 واط ، 0.1 فولت ، 0.01 أمبير
- Start Detection: 0.20 واط
- ذاكرة: Cumulative Kilowatt-hours and elapsed time retained.
- أبعاد المنتج: 3.74 × 1.85 × 2.36 بوصة
- وزن السلعة: 13.05 أونصة (370 جرامًا)
- مادة: Full ABS fire retardant material housing
- تاريخ التوفر الأول: 18 أكتوبر 2019
9. الضمان والدعم
The Poniie PN1500 Electricity Usage Monitor comes with a 1 سنة الضمان provided by Poniie.
For technical support, warranty claims, or further inquiries, please contact Poniie customer service through their official website or the retailer where the product was purchased. Please have your model number (PN1500) and purchase date available when contacting support.
You can visit the Poniie Store for more information: Poniie Store on Amazon