1. المقدمة
The Kaktus WHID (WiFi HID Injector) is a specialized USB device designed to emulate a human interface device (HID) such as a keyboard. It allows for the remote injection of keystrokes into a target computer via a Wi-Fi connection. This manual provides detailed instructions for its setup, operation, and maintenance.
المميزات الرئيسية:
- Remote Keystroke Injection: Send keystrokes to a target machine over Wi-Fi.
- ESP32-S2 Module: Equipped with an Xtensa single-core 32-bit LX7 microprocessor (up to 240 MHz).
- Integrated Memory: 128 KB ROM, 320 KB SRAM, and 4 MB embedded SPI flash memory.
- Hardware Cryptographic Accelerators: Supports AES, ECB/CBC/OFB/CFB/CTR, GCM, SHA, RSA, and ECC for enhanced security.
- Physical Security Functions: Includes transparent external flash and RAM encryption (AES-XTS), Secure Boot (RSA-PSS), and HMAC/digital signature modules.
- شبكة واي فاي مدمجة: 802.11 b/g/n 2.4 GHz transceiver (up to 150 Mbps).
- مستشعر درجة الحرارة: Integrated sensor for temperature monitoring (-20°C to 110°C).
- التوصيل والتشغيل: Designed for ease of use without requiring complex software installation for basic functions.
2. محتويات العبوة
يرجى التأكد من وجود جميع العناصر في الحزمة الخاصة بك:
- 1 x WiFi HID Injector Unit
3. انتهى المنتجview
The Kaktus WHID is a compact USB device, typically white with red accents, designed for portability and discreet operation. It features a standard USB-A connector for interfacing with host systems.
Figure 3.1: Kaktus WHID WiFi HID Injector. This image shows the device with a WiFi symbol, indicating its wireless capabilities for sending keystrokes to a target machine.
Figure 3.2: Kaktus WHID with its protective cap removed, revealing the USB connector. This view highlights the device's compact form factor.
4. المواصفات
| ميزة | مواصفة |
|---|---|
| مادة | بلاستيك ايه بي اس |
| العمل المجلدtage | 3.0 - 3.6 فولت |
| WiFi Current (Peak) | 310 مللي أمبير |
| Light Sleep Current | شنومكس وا |
| تيار النوم العميق | 20-235 وا |
| Board Size (without USB casing) | 17 مم × 50 مم |
| Board Size (with USB casing) | 19 مم × 62 مم |
| المعالج الدقيق | ESP32-S2 Xtensa single-core 32-bit LX7 (up to 240 MHz) |
| ذاكرة للقراءة فقط | 128 كيلو بايت |
| سرام | 320 كيلو بايت |
| ذاكرة فلاش | 4 MB embedded SPI |
| واي فاي قياسي | 802.11 b/g/n 2.4 GHz (up to 150 Mbps) |
| نطاق مستشعر درجة الحرارة | -20 درجة مئوية إلى 110 درجة مئوية |
| أبعاد المنتج | 10 × 10 × 10 سم |
| وزن العنصر | 9.07 جرام |
| تكنولوجيا الاتصال | يو اس بي، واي فاي |
| رقم الموديل | Tangxi2cwuzvs4r9 |
5. الإعداد
5.1 الاتصال الأولي
The Kaktus WHID is designed for plug-and-play operation. Simply insert the device into an available USB port on your computer or target device. No additional software installation is required for basic functionality.
Figure 5.1: The Kaktus WHID device connected to a laptop's USB port, demonstrating a typical setup.
5.2 Entering Bootloader Mode
To flash custom firmware or perform advanced configurations, you may need to put the ESP32-S2 module into bootloader mode. Follow these steps:
- Insert the Kaktus WHID (WUD) into your laptop's USB port.
- Place a magnet close to the hall sensor (GPIO 0) on the device.
- Press the reset button. The WUD will now enter bootloader mode.
6. تعليمات التشغيل
Once connected, the Kaktus WHID functions as a USB Human Interface Device. Its primary purpose is to send keystrokes to the connected computer via Wi-Fi. This allows for remote execution of commands and scripts.
To utilize its full capabilities, users typically need to develop or load custom scripts and firmware. This often involves using development environments like the Arduino IDE to program the ESP32-S2 module for specific tasks, such as keyboard assistance or automated command sequences.
7. الصيانة
To ensure the longevity and proper functioning of your Kaktus WHID, observe the following maintenance guidelines:
- حماية منفذ USB: The device features a metal clip around its ABS plastic body with a rubber oil coating. The casing is designed to provide effective protection for the USB port. Keep the protective cap on when not in use to prevent dust and damage.
- Handling the PCB: The device comes in anti-static packaging to protect the printed circuit board (PCB). Exercise caution when handling the PCB, especially before inserting it into the casing, to avoid electrostatic discharge.
- تنظيف: Use a dry, soft cloth to clean the exterior of the device. Avoid using liquid cleaners or solvents.
- تخزين: قم بتخزين الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
8. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Kaktus WHID, consider the following troubleshooting steps:
- الجهاز غير قابل للتعريف: If the device is not recognized by your computer, try unplugging and re-plugging it into the USB port. Ensure the USB port is functional.
- مشاكل الاتصال: For Wi-Fi related problems, ensure your Wi-Fi network is operational and the device is configured correctly for your network.
- Custom Firmware/Scripts: If you are using custom firmware or scripts and experience issues, verify your code for errors. Compatibility with specific Arduino IDE versions or libraries might be a factor. Refer to relevant online communities or documentation for assistance with custom development.
- Bootloader Mode Issues: If you have difficulty entering bootloader mode, ensure the magnet is correctly positioned over the hall sensor (GPIO 0) and the reset button is pressed firmly.
9. الضمان والدعم
للحصول على معلومات الضمان أو الدعم الفني أو استفسارات الخدمة، يُرجى مراجعة الوثائق المُقدمة عند الشراء أو التواصل مع التاجر. احتفظ بإيصال الشراء لأي مطالبات تتعلق بالضمان.