DEVMO PIR-8 Automatic DC 12V-24V Infrared Motion Sensor Switch User Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your DEVMO PIR-8 Automatic DC 12V-24V Infrared Motion Sensor Switch. Please read this manual thoroughly before use to ensure proper function and safety.

مميزات المنتج

• Infrared detection controller, designed to control load switches using infrared detection.
• LED lighting motion sensing switch with an adjustable OFF delay timing function from 1 to 10 minutes.
• Activates ON when motion is detected within its field of view. The ON time hold is adjustable after motion ceases.
• PIR (Passive InfraRed) sensor offers an effective range of 16 feet, with diminished sensing up to 26 feet for moving human bodies.
• The PIR Dome Lens provides a nominal 60-degree field of view.
• Operates on 12V or 24V DC and can switch up to a 6A load.

تحديد

محتويات الحزمة

• 1pc x DEVMO PIR-8 Body Sense Infrared LED Strip Controller

المنتج انتهىview

The DEVMO PIR-8 motion sensor switch is a compact device designed to automate lighting based on human motion detection. It features a passive infrared (PIR) sensor, a terminal block for power input and load output, and an adjustable dial for setting the delay time.

الإعداد والتثبيت

1. التركيب

Select a suitable location for mounting the sensor. The sensor has a 60-degree field of view and an effective range of 16 feet (up to 26 feet with diminished sensing). Mount the device using the integrated mounting holes on a stable surface, such as a wall or ceiling, ensuring it has a clear line of sight to the area where motion is to be detected.

2. توصيلات الأسلاك

The sensor operates on 12V-24V DC. Ensure the power source is disconnected before making any wiring connections to prevent electrical shock or damage to the device.

1. اتصال الإدخال: Connect the 12V-24V DC power supply to the "INPUT 12/24V" terminals. Ensure correct polarity: positive (+) to positive, and negative (-) to negative.
2. اتصال الإخراج: Connect your LED light or other 12V-24V DC load to the "OUTPUT 12/24V" terminals. Ensure correct polarity. Important: The sensor switches the ground (negative) side of the circuit. Ensure your load's positive terminal is connected directly to the power supply's positive, and the load's negative terminal is connected to the sensor's negative output.

Warning: Incorrect wiring, especially regarding polarity or switching the wrong side of the circuit, can lead to malfunction or damage to the sensor and connected devices. Always verify wiring before applying power.

تعليمات التشغيل

ضبط وقت التأخير

The DEVMO PIR-8 features an adjustable dial on its side (refer to Figure 2) to set the OFF delay time. This dial allows you to configure how long the connected load remains active after motion is no longer detected. The delay can be set from 1 to 10 minutes.

• Rotate the dial clockwise to increase the delay time.
• Rotate the dial counter-clockwise to decrease the delay time.

Experiment with different settings to find the optimal delay for your specific application and environment.

صيانة

• تنظيف: Keep the PIR dome lens clean and free from dust or obstructions. Use a soft, dry cloth to gently wipe the lens. Do not use abrasive cleaners or solvents.
• تقتيش: Periodically check wiring connections to ensure they are secure and free from corrosion.
• بيئة: Ensure the sensor is not exposed to direct sunlight, extreme temperatures, or excessive moisture, as these can affect performance and lifespan.

استكشاف الأخطاء وإصلاحها

الضمان والدعم

For warranty information or technical support, please contact DEVMO customer service through your purchase platform or visit the official DEVMO webالموقع. احتفظ بإيصال الشراء كإثبات للشراء.