LABOREDUCER LED Under Cabinet Lighting Kit (Model LR6CWSWITCH) Instruction Manual

المنتج انتهىview

The LABOREDUCER LED Under Cabinet Lighting Kit provides efficient and adjustable illumination for various indoor spaces. This kit includes six linkable LED puck lights with a touch dimmer, designed for easy installation and versatile application in kitchens, cupboards, bookcases, and display cases.

Image: LABOREDUCER LED Under Cabinet Lighting Kit providing illumination in a kitchen setting.

محتويات الحزمة

تأكد من وجود جميع المكونات في حزمة التثبيت قبل البدء في عملية التثبيت.

• 6 × مصابيح LED
• 1 x Touch Dimmer Switch
• 1 x 6-Way Splitter
• 2 × كابلات تمديد
• 1 × محول طاقة (قابس أمريكي)
• 15 × مشابك كابلات
• 12 x Double-Sided Adhesive Stickers
• 12 × مسامير التثبيت

الصورة: تمثيل مرئي لجميع العناصر المضمنة في عبوة المنتج.

تحديد

Image: Detailed dimensions of the puck lights and associated components.

الإعداد والتثبيت

The LABOREDUCER LED Under Cabinet Lighting Kit offers flexible installation options using either adhesive stickers or screws. Ensure the installation surface is clean and dry before proceeding.

طرق الاتصال

The puck lights can be linked in series or parallel to suit your specific layout requirements. Use the provided 6-way splitter and extension cables as needed.

الصورة: السابقamples of connecting puck lights in series (one by one) and in parallel using the 6-way splitter.

التثبيت بالمسامير

1. العلامة: Place the screw drawing sticker on the desired installation spot.
2. حفر: Screw into the marked spots, leaving the screw head approximately 3mm high.
3. التركيب: Align the puck light with the screws and push to fasten it securely.
4. إدارة الكابلات: Use the provided cable clips to neatly secure the wiring.

Image: Visual instructions for screw-based installation of the puck lights.

Installation with Adhesive Stickers

1. تحضير السطح: Clean and dry the desired installation area thoroughly.
2. تطبيق المادة اللاصقة: Peel off the backing from a double-sided adhesive sticker and apply it to the back of the puck light.
3. جبل النور: Press the puck light firmly onto the cleaned surface for several seconds to ensure a strong bond.
4. إدارة الكابلات: Use the provided cable clips to neatly secure the wiring.

تعليمات التشغيل

The lighting kit is controlled via the integrated touch dimmer switch.

• تشغيل/إيقاف التشغيل: Tap the touch dimmer switch to turn the lights on or off.
• ضبط السطوع: Press and hold the touch dimmer switch to adjust the brightness level. Release when the desired brightness is reached.
• وظيفة الذاكرة: The lights will remember the last brightness setting when turned off and on, unless the power adapter is unplugged.

Image: Visual representation of the touch dimmer in action, showing different brightness levels.

صيانة

To ensure optimal performance and longevity of your LED lighting kit, follow these maintenance guidelines:

• تنظيف: Disconnect power before cleaning. Use a soft, dry cloth to wipe the puck lights and cables. Do not use abrasive cleaners or solvents.
• تقتيش: Periodically check all connections and cables for any signs of damage or wear.
• بيئة: هذا المنتج مصمم للاستخدام الداخلي فقط. تجنب تعريضه للرطوبة أو الرطوبة العالية أو درجات الحرارة القصوى.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your lighting kit, refer to the following common problems and solutions:

الضمان والدعم

Specific warranty details are not provided in the product information. For support, warranty claims, or further assistance, please contact LABOREDUCER customer service through their official channels or the retailer where the product was purchased.

You can visit the LABOREDUCER Store for more information: LABOREDUCER Store