مقدمة
This manual provides essential information for the safe assembly, operation, and maintenance of your Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On. Please read all instructions carefully before assembly and use. Adult supervision is required at all times.
معلومات السلامة
- يجب أن يكون هناك إشراف من الكبار.
- Always ensure your child wears a helmet when operating the ride-on. (Helmet not included).
- This product contains small parts prior to assembly, posing a خطر الاختناق to children under 3 years of age. Keep unassembled parts away from young children.
- Recommended for toddlers aged 2-4 years.
- الحد الأقصى للوزن: 35 رطلاً.
- تأكد من تثبيت جميع الأجزاء بشكل آمن قبل كل استخدام.
- Use on flat, level surfaces away from traffic, stairs, and steep inclines.
محتويات الحزمة
Verify all components are present before beginning assembly. Refer to the included printed instruction sheet for a detailed parts list.
- Main body/chassis
- عجلة أمامية مزودة بدواسات
- العجلات الخلفية (2)
- المقاود
- قضيب المحور
- Fasteners and caps
- ورقة الملصقات
تعليمات التجميع
Adult assembly is required. You will need a hammer and a screwdriver (not included) for assembly. Please follow the steps below carefully.
1. تركيب العجلات الخلفية
Insert the axle rod through the designated holes in the main body. Secure the rear wheels onto the axle rod, ensuring they are firmly in place. Use the provided caps and tap gently with a hammer if needed to secure.
فيديو: Assembly instructions for a 10-inch Fly Wheel ride-on, demonstrating the installation of rear wheels and other components.
2. تركيب الدواسات
Attach the pedals to the front wheel assembly. Ensure they fit snugly and are securely fastened. Tap into place with a hammer if necessary.
3. Building the Chassis
Connect the front fork assembly (with the front wheel and pedals) to the main body of the ride-on. Align the components and secure them using the provided screws. Do not overtighten.
4. Attaching Handlebars
Place the handlebars onto the steering column. Secure them with the appropriate fasteners, ensuring they are stable and allow for smooth steering. Do not overtighten.
5. Applying Stickers
Personalize your ride-on by applying the Frozen 2 character graphics stickers as desired. Ensure surfaces are clean and dry before application for best adhesion.
صورة: جانب view of the assembled Disney Frozen 2 Fly Wheels 10 inch Junior Cruiser Ride-On.
تعليمات التشغيل
The Disney Frozen 2 Fly Wheels Junior Cruiser is designed for young riders to enjoy. Its low center of gravity and easy-grip handlebars provide stability and control.
- يركب: Children can propel the ride-on by pedaling with their feet or by pushing off the ground.
- المؤثرات الصوتية: Press the push button located on the handlebars to activate exhilarating sounds and tunes.
فيديو: مقدمة موجزةview عرضasing the Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On in action, highlighting its features and design.
صيانة
- Regularly inspect all fasteners and connections to ensure they are tight and secure.
- Clean the ride-on with a damp قطعة قماش وصابون خفيف. تجنب المواد الكيميائية القاسية.
- Store the ride-on in a dry place away from direct sunlight to prevent material degradation.
استكشاف الأخطاء وإصلاحها
- أجزاء منفصلة: If any parts become loose, re-tighten them immediately.
- Sound effects not working: تأكد من تركيب البطاريات بشكل صحيح وأنها مشحونة بشكل كافٍ. استبدل البطاريات إذا لزم الأمر.
- Difficulty steering/pedaling: Ensure all assembly steps were followed correctly and no parts are obstructed.
تحديد
- أبعاد المنتج: 23.7 في ل س 14.92 في 14.8 × العرض في H
- وزن السلعة: 5.04 رطل
- رقم موديل المنتج: 600251-2
- العمر الموصى به من قبل الشركة المصنعة: 24 أشهر - 5 سنوات
- الوزن المحدد: 35 رطل
- حجم العجلة الأمامية: 10 بوصة
صورة: مخطط أبعاد المنتج.
دعم العملاء
For missing or broken parts, or any other inquiries, please contact customer service.
- Schylling Customer Service: 800-541-2929
