ONETWOFIT Dual Bike Floor Stand

مقدمة

Thank you for choosing the ONETWOFIT Dual Bike Floor Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new bike stand. Please read these instructions carefully before use and retain them for future reference.

This durable steel bike stand is designed to securely hold two bicycles, offering a convenient and space-saving storage solution for your home, garage, or apartment. It features a powder-coated finish for rust resistance and non-slip sleeves for floor protection.

الشكل 1: ميزات المنتج - Highlighting the anti-corrosion paint, non-slip bottom sleeves, and heavy-duty tubular steel construction.

معلومات السلامة

• Ensure all bolts are securely tightened before placing bicycles in the stand.
• لا تتجاوز الحد الأقصى لوزن الحامل.
• ضع الحامل على سطح مستوٍ وثابت لمنع الانقلاب.
• Keep children and pets away from the stand during assembly and when bikes are stored.
• افحص الحامل بانتظام للتأكد من خلوه من أي علامات تآكل أو تلف. لا تستخدمه إذا كان تالفاً.

محتويات الحزمة

تأكد من وجود جميع المكونات المذكورة أدناه في العبوة. في حال وجود أي أجزاء مفقودة أو تالفة، يرجى التواصل مع خدمة العملاء.

الشكل 2: محتويات العبوة - This image displays all parts included: (1) Square Tube, (2) Tubular Legs, (3) Wheel Support, (4) Upright Tubes, (5) Cross-piece, (6) Hex Head Bolts, (7) Curved Washers, and (8) Long Metal Screws.

1. أنبوب مربع (1 قطعة)
2. Tubular Legs (2 قطعة)
3. دعم العجلات (1 قطعة)
4. أنابيب تستقيم (4 قطعة)
5. القطعة المتعارضة (1 قطعة)
6. البراغي سداسية الرأس (Quantity as needed for assembly)
7. غسالات منحنية (Quantity as needed for assembly)
8. Long Metal Screws (Quantity as needed for assembly)

Note: Tools required for assembly (not included): 10mm wrench or socket, 4.5mm Allen wrench.

تعليمات التجميع

Follow these steps to assemble your ONETWOFIT Dual Bike Floor Stand. Refer to Figure 3 for visual guidance.

الشكل 3: خطوات التثبيت - Visual guide for assembling the bike stand.

1. الخطوة 1: قم بتجميع القاعدة
   Attach the Square Tube (1) to the two Tubular Legs (2). Secure them using the Hex Head Bolts (6) and Curved Washers (7). Ensure the non-slip sleeves on the Tubular Legs are facing downwards.
2. Step 2: Attach Wheel Supports and Upright Tubes
   Insert the Wheel Support (3) and the four Upright Tubes (4) into the designated slots on the assembled base. The Wheel Support should be positioned in the center, and the Upright Tubes on either side. Secure these components using the Long Metal Screws (8).
3. Step 3: Install the Cross-piece
   Attach the Cross-piece (5) between the two central Upright Tubes. This piece provides additional stability. Secure it with the remaining Long Metal Screws (8).
4. الخطوة 4: التشديد النهائي
   Once all components are in place, carefully tighten all bolts and screws. Do not overtighten, as this may warp the metal frame. Ensure the stand is stable and does not wobble.

Tip: If screw holes do not align perfectly, slightly loosen adjacent bolts, adjust the components, and then re-tighten.

تعليمات التشغيل

The ONETWOFIT Dual Bike Floor Stand is designed for easy and convenient bicycle storage.

Storing Bicycles

1. Position the bike stand on a flat, stable surface in your desired storage location (e.g., garage, living room, bedroom).
2. Roll your bicycle into one of the designated slots. The stand is designed to hold the bike upright by its wheel.
3. For a second bicycle, roll it into the adjacent slot. You can store bikes facing the same direction or opposite directions, depending on your space and preference.

Figure 4: Secure Bike Storage - A bicycle stored upright in the stand.

الشكل 5: خيارات التخزين المزدوجة - Bicycles can be stored in the same or opposite directions.

Figure 6: Versatile Storage Locations - The stand is suitable for various indoor environments.

Figure 7: Ease of Use - The stand is designed for easy use by both children and adults.

التوافق

The stand is suitable for most bicycle tires, with a maximum tire size of 26 inches and a width of 2.5 inches. It may not be suitable for commuter bikes or bikes with larger or wider tires.

صيانة

To ensure the longevity and optimal performance of your bike stand, follow these simple maintenance guidelines:

• التنظيف المنتظم: امسح الحامل بالإعلانamp cloth to remove dust and dirt. Avoid abrasive cleaners that could damage the powder-coated finish.
• فحص الضرر: Periodically check all components for any signs of wear, rust, or damage. Pay close attention to welds and connection points.
• شد المثبتات: Re-tighten all bolts and screws periodically to ensure the stand remains stable and secure.
• حماية الأرضية: Ensure the non-slip bottom sleeves are intact to protect your flooring. Replace if worn or damaged.

استكشاف الأخطاء وإصلاحها

تحديد

الشكل 8: أبعاد المنتج - Key measurements of the ONETWOFIT Dual Bike Floor Stand.

• نموذج: OT064101
• مادة: سبائك الفولاذ
• لون: أسود
• أبعاد المنتج (العمق × العرض × الارتفاع): 21.3 بوصة × 23.6 بوصة × 22.4 بوصة (54 سم × 60 سم × 57 سم)
• وزن السلعة: 9.46 رطل (4.3 كجم)
• سعة: دراجتان
• Max Tire Diameter: 26 بوصة
• Max Tire Width: 2.5 بوصة
• التجميع مطلوب: نعم
• نوع التركيب: جبل الطابق
• ميزة خاصة: Portable, Powder Coated, Anti-corrosion

الضمان والدعم

ONETWOFIT products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official ONETWOFIT website. If you encounter any issues or have questions regarding your Dual Bike Floor Stand, please contact ONETWOFIT customer support.

معلومات الاتصال:

• متجر العلامة التجارية: Visit the ONETWOFIT Store on Amazon
• الدعم عبر الإنترنت: Refer to the ONETWOFIT official webموقع للحصول على تفاصيل الاتصال.