Sunco Lighting DL_SL6-14W

Sunco Lighting 6-Inch Ultra-Thin LED Recessed Light Manual

Model: DL_SL6-14W

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your Sunco Lighting 6-Inch Ultra-Thin LED Recessed Ceiling Lights. These 14W, 5000K Daylight fixtures are designed for easy installation without a can, featuring a wafer-thin profile and an integrated junction box. They offer seamless dimming capabilities and are IC rated for direct contact with insulation.

معلومات السلامة

  • Always turn off power at the circuit breaker before installation or maintenance.
  • إذا لم تكن متأكدًا من عملية التثبيت، استشر كهربائيًا مؤهلًا.
  • تأكد من أن جميع التوصيلات الكهربائية تتوافق مع قوانين الكهرباء المحلية والوطنية.
  • لا تحاول تعديل التركيبات.
  • تم تصميم هذا المنتج للاستخدام الداخلي فقط.
  • The fixture is IC rated, suitable for direct contact with insulation.

ماذا يوجد في الصندوق

تحتوي كل عبوة على المكونات التالية:

  • 6x Sunco Lighting 6-Inch Ultra-Thin LED Recessed Lights
  • 6x Integrated Junction Boxes
  • Installation Hardware (e.g., wire nuts, spring clips)
  • دليل التعليمات

تحديد

ميزةالتفاصيل
رقم الموديلDL_SL6-14W
مقاس6 بوصة
درجة حرارة اللون5000 كلفن ضوء النهار
واتtage14 واط
سطوع850 لومن
المجلدtage120 فولت
قابلة للتعتيمنعم (10%-100%)
مادةPolycarbonate, Copper Wiring
الاستخدام الداخلي والخارجيداخلي
الشهاداتEnergy Star, ETL (5005842), FCC (L10), RoHS
وزن العنصر0.01 Ounces (per unit)
أبعاد المنتج7 × 1 × 7 بوصة

Note: Efficiency is approximately 61 lumens per watt.

Diagram showing the dimensions of the 6-inch ultra-thin LED recessed light and its separate junction box.

Image: Detailed dimensions of the light fixture and junction box.

الإعداد والتثبيت

These ultra-thin LED recessed lights are designed for easy, canless installation. Follow these steps for proper setup:

الأدوات المطلوبة:

  • مفك البراغي
  • أداة تجريد الأسلاك
  • شريط قياس
  • Hole Saw (appropriate size for 6-inch fixture)
  • نظارات السلامة

خطوات التثبيت:

  1. إيقاف تشغيل الطاقة: Before starting, ensure the power to the installation area is turned off at the circuit breaker to prevent electrical shock.
  2. Cut Hole in Ceiling: Use a hole saw to cut a 6-inch diameter hole in the desired ceiling location. Ensure there are no obstructions (e.g., joists, pipes) behind the ceiling.
  3. توصيل الأسلاك: Open the junction box. Connect the house electrical wires to the fixture wires using the provided wire nuts:
    • Black (Live) to Black (Fixture)
    • White (Neutral) to White (Fixture)
    • Green or Bare Copper (Ground) to Green (Fixture)
    Securely close the junction box.
  4. ضع صندوق التوصيل: Insert the junction box into the ceiling hole. The compact design allows it to sit above the ceiling.
  5. تركيب وحدة الإضاءة: Connect the light fixture to the junction box cable. Fold the spring-loaded clips on the side of the light fixture upwards and push the fixture into the ceiling hole. The clips will automatically snap down and hold the fixture securely in place.
  6. ضوء الاختبار: أعد التيار الكهربائي إلى قاطع الدائرة واختبر وحدة الإضاءة.
Diagram showing the installation of a recessed light with junction box and spring clips

Image: Installation diagram showing the junction box connected to house wiring and the light fixture with spring clips.

فيديو: أكثر منview of Sunco Lighting's commitment to quality and customer service, including product testing and design.

تعليمات التشغيل

Your Sunco Lighting LED recessed lights are designed for simple operation and enhanced functionality.

تشغيل/إيقاف التشغيل:

Operate the lights using a standard wall switch connected to the circuit. Flip the switch to turn the lights on or off.

وظيفة التعتيم:

These LED fixtures are fully dimmable from 10% to 100%. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on the circuit. Adjust the dimmer switch to achieve your desired brightness level.

Image showing a room with recessed lights, split into two halves: one dark with lights at 10% brightness, and one bright with lights at 100% brightness, with a dimmer switch graphic.

Image: Visual representation of the smooth dimming capability from 10% to 100%.

صيانة

The Sunco Lighting LED recessed lights require minimal maintenance.

  • تنظيف: تأكد من فصل التيار الكهربائي قبل التنظيف. امسح الجهاز بقطعة قماش ناعمة وجافة أو مبللة قليلاً.amp قماش. لا تستخدم مواد كيميائية قاسية أو منظفات كاشطة.
  • استبدال المصباح: These LED fixtures have integrated LEDs and do not require bulb replacement. The estimated lifespan is 50,000 hours.
  • تقتيش: Periodically inspect the fixtures for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your LED recessed lights, refer to the following common problems and solutions:

مشكلةالسبب المحتملحل
الضوء لا يعمل.No power, loose wiring, faulty switch, or faulty fixture.Check circuit breaker. Verify all wire connections are secure. Test the switch. If issues persist, contact support.
يتذبذب الضوء أو يخفت بشكل غير منتظم.Incompatible dimmer switch, loose wiring, or voltagتقلبات البريد.Ensure a compatible LED dimmer switch is used. Check wiring connections. Consult an electrician for voltagقضايا البريد.
الإضاءة ليست ساطعة كما هو متوقع.Dimmer setting too low, or incorrect light placement.Adjust dimmer to 100%. Consider adding more fixtures for larger areas if needed.

معلومات الضمان

Sunco Lighting provides a حماية لمدة عام واحد warranty for this product. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Sunco Lighting customer support.

Additional protection plans may be available for purchase through authorized retailers.

يدعم

For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable specialists are available to assist you.

Visit the official Sunco Lighting webموقع إلكتروني لمعلومات الاتصال وموارد إضافية: www.suncolighting.com

© 2026 Sunco Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.