HOBBYWING JUSTOCK Black G2.1 Brushless Motor Instruction Manual

1. انتهى المنتجview

The HOBBYWING JUSTOCK Black G2.1 brushless motor is engineered for high-performance in 1/10th and 1/12th scale RC vehicles. It is specifically designed for Stock or Sport Class racing, normal training, and rock crawlers. This motor features a built-in hall sensor and a non-adjustable end bell, combined with a high-precision and balanced rotor for consistent performance. A silicone O-ring seal is integrated between the end bell and stator to enhance durability and protection. The motor is IFMAR and ROAR approved, ensuring compliance with competitive racing standards.

Image showing the HOBBYWING JUSTOCK Black G2.1 brushless motor, a sensored motor designed for RC vehicles.

2. الميزات الرئيسية

• Built-in Hall Sensor: Provides precise motor position feedback for smooth operation.
• Non-adjustable End Bell: Ensures consistent timing and performance, ideal for spec racing.
• High Precision and Balanced Rotor: Contributes to efficient power delivery and reduced vibration.
• Silicone O-ring Seal: Fitted between the end bell and stator for enhanced protection.
• IFMAR and ROAR Approved: Certified for use in sanctioned racing events.
• رقم الموديل: 30408013 (XeRun Justock 3650 SD G2.1 17.5T Sensored Brushless Motor).

3. الإعداد والتثبيت

Proper installation is crucial for optimal performance and longevity of your motor. Follow these steps carefully:

1. تركيب المحرك: Securely attach the motor to your vehicle's motor mount using appropriate screws. Ensure the motor is aligned correctly with the pinion gear and spur gear to prevent binding.
2. Gear Mesh Adjustment: Set the gear mesh between the pinion and spur gear. There should be a small amount of play, similar to a piece of paper thickness, to allow for smooth operation without excessive wear.
3. الاتصال بـ ESC: Connect the three motor wires (A, B, C) to the corresponding output wires on your Electronic Speed Controller (ESC). Ensure correct polarity if your ESC requires it, though most brushless systems are self-sensing.
4. Sensor Cable Connection: Connect the sensor cable from the motor to the sensor port on your ESC. This is essential for sensored operation, providing smoother low-speed control and consistent power delivery.
5. مصدر الطاقة: Ensure your LiPo battery (2-3S recommended) is fully charged and properly connected to the ESC.

4. تعليمات التشغيل

Once installed, follow these guidelines for operating your HOBBYWING JUSTOCK motor:

• معايرة ESC: Always calibrate your ESC with your radio system before the first use and after any changes to your radio settings. Refer to your ESC's manual for specific calibration procedures.
• التشغيل الأولي: Perform a short, low-speed test run to ensure all components are functioning correctly and there are no unusual noises or binding.
• مراقبة درجة الحرارة: Regularly monitor the motor's temperature during operation. Excessive heat can damage the motor. If the motor becomes too hot to touch (typically above 80°C / 176°F), reduce gearing or adjust driving style.
• Zero Timing Operation: This motor is designed for zero timing spec racing. Avoid attempting to adjust motor timing, as the end bell is non-adjustable.
• الاعتبارات البيئية: Avoid operating the motor in excessively wet or dusty conditions unless the vehicle is specifically designed for such environments.

5. الصيانة

Regular maintenance helps extend the life and maintain the performance of your motor:

• تنظيف: After each use, especially in dirty conditions, clean the motor exterior to remove dirt, dust, and debris. Use a soft brush or compressed air.
• فحص المحامل: Periodically check the motor bearings for smooth rotation. If bearings feel rough or noisy, they may need cleaning or replacement.
• Sensor Cable Check: Inspect the sensor cable for any signs of damage, kinks, or loose connections. A damaged sensor cable can lead to inconsistent motor performance.
• وصلات الأسلاك: Ensure all motor and ESC wire connections are secure and free from corrosion.
• تخزين: Store the motor in a clean, dry environment away from extreme temperatures.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your motor, consider the following common troubleshooting steps:

• المحرك لا يدور:
  • تحقق من مستوى شحن البطارية.
  • Verify all wire connections between motor, ESC, and battery are secure.
  • Ensure ESC is properly calibrated with the radio.
  • Inspect sensor cable for damage or incorrect connection.
• ارتفاع درجة حرارة المحرك:
  • Check gear mesh for binding or excessive tightness.
  • Reduce pinion gear size or increase spur gear size (lower gearing).
  • تأكد من وجود تدفق هواء كافٍ حول المحرك.
  • تحقق من حجم البطاريةtage is within the recommended range (2-3S LiPo).
• Inconsistent Performance / Cogging:
  • Check sensor cable for damage or loose connection.
  • Ensure motor wires are securely connected to the ESC.
  • Verify ESC settings are appropriate for a sensored brushless motor.
  • Inspect motor for internal damage or debris.
• ضوضاء غير عادية:
  • التحقق من شبكة التروس.
  • Inspect motor bearings for wear or damage.
  • Ensure no foreign objects are interfering with the motor's rotation.

7. المواصفات

8. الضمان والدعم

HOBBYWING products are manufactured with quality and performance in mind. Please note the following regarding warranty and support:

• Because HOBBYWING has no control over the use, installation, or maintenance of this product, no liability may be assumed for any damage or losses resulting from the use of the product.
• HOBBYWING does not assume responsibility for any losses caused by unauthorized modifications to its products.
• HOBBYWING reserves the right to modify product design, appearance, features, and usage requirements without prior notification.
• HOBBYWING is only responsible for the cost of its product.
• Products purchased from Hong Kong / Chinese retailers may not conform to CE / North America regulations and may be deemed non-warranty.
• Products purchased from discount/auction stores such as eBay are considered "non-authorized sales channels" in North America and may be deemed non-warranty.

For technical support or further inquiries, please contact your authorized HOBBYWING dealer or visit the official HOBBYWING webموقع لمعلومات الاتصال.