DAKASON 30W LED Wall Pack Instruction Manual

مقدمة

Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.

Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.

معلومات السلامة

يرجى مراعاة احتياطات السلامة التالية أثناء التركيب والتشغيل:

• تحذير: خطر التعرض لصدمة كهربائية. افصل التيار الكهربائي من المصهر أو قاطع الدائرة قبل التركيب أو الصيانة.
• يجب أن يتم التركيب بواسطة كهربائي مؤهل وفقًا لجميع قوانين ولوائح الكهرباء المحلية.
• ضمان حجم العرضtage is compatible with the fixture's requirements (100-277V AC).
• لا تلمس الجهاز بأيدٍ مبللة أو عند الوقوف على أرضية مبللة أو جافةamp الأسطح.
• This fixture is designed for outdoor use and is IP65 rated for wet locations.
• Do not attempt to modify or disassemble the fixture beyond what is described in this manual.

محتويات الحزمة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
• Photocell (pre-installed)
• Non-photocell cover (for disabling photocell function)
• أدوات التثبيت (براغي، موصلات أسلاك)
• دليل التعليمات

مميزات المنتج

• كفاءة الطاقة: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
• Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
• رأس قابل للتعديل: Fixture angle can be adjusted 0-90 degrees for precise light direction.
• بناء متين: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
• عمر طويل: Maintenance-free LEDs with 50,000 hours of life.

الإعداد والتثبيت

Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.

1. تركيب التركيبات

1. Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
2. Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
3. Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.

Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.

2. توصيلات الأسلاك

1. Connect the fixture's black wire to the supply's live/hot wire.
2. Connect the fixture's white wire to the supply's neutral wire.
3. Connect the fixture's green/ground wire to the supply's ground wire.
4. Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
5. قم بإدخال جميع الأسلاك بعناية في صندوق الوصلات.

3. تثبيت التركيب

1. Attach the fixture body to the mounted plate, ensuring it is securely hinged.
2. Close the fixture and tighten any securing screws to ensure a watertight seal.

Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.

4. Photocell Configuration (Optional)

The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.

1. To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
2. Pull out the existing photocell.
3. Screw in the non-photocell cover into the opening.
4. أعد تجميع lamp السكن.

Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.

تعليمات التشغيل

عملية الكهروضوئية

If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.

Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.

ضبط رأس الضوء

The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.

Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.

صيانة

The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.

• تنظيف: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp قطعة قماش. لا تستخدم المنظفات الكاشطة أو المذيبات، لأنها قد تتلف الطلاء أو العدسة.
• تقتيش: افحص الجهاز بشكل دوري بحثًا عن أي علامات تلف أو وصلات مفكوكة أو تآكل. عالج أي مشكلة على الفور.
• The LEDs are integrated and not user-replaceable.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:

تحديد

Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.

معلومات الضمان

This DAKASON LED Wall Pack comes with a ضمان لمدة 5 سنوات. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.

دعم العملاء

For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.