مقدمة
The TC Electronic FLUORESCENCE SHIMMER REVERB is a shimmering, super-bright reverb pedal designed to create ethereal reverb sounds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal.
الشكل 1: الجزء العلوي view of the FLUORESCENCE SHIMMER REVERB pedal.
- Shimmering Reverb: Creates bright, ethereal reverb effects.
- Intuitive 4-Knob Interface: Simple controls for easy sound shaping.
- التجاوز الحقيقي: Ensures ultimate signal integrity when the effect is disengaged.
- بناء متين: Features a robust metal chassis for roadworthy reliability.
يثبت
Follow these steps to connect your FLUORESCENCE SHIMMER REVERB pedal:
- توصيل الطاقة: Connect a 9V DC, 100mA power adapter (center negative) to the power input jack on the pedal. This pedal operates on corded electric power.
- اتصال الإدخال: Connect your guitar or other instrument to the 1/4 inch (6.35mm) INPUT jack on the pedal using a standard instrument cable.
- اتصال الإخراج: Connect the 1/4 inch (6.35mm) OUTPUT jack of the pedal to your ampمكبر الصوت أو دواسة التأثير التالية في سلسلة الإشارات الخاصة بك.
- الموقع: For optimal shimmer reverb effects, place the FLUORESCENCE SHIMMER REVERB pedal towards the end of your effects chain, typically after modulation and drive pedals, but before delay pedals.
الشكل 2: خلفي view showing input, output, and power connections.
تشغيل الدواسة
The FLUORESCENCE SHIMMER REVERB pedal features a straightforward 4-knob interface for easy control over your sound:
Figure 3: Control knobs for the FLUORESCENCE SHIMMER REVERB pedal.
- ريفيرب المقبض: Controls the overall decay time and size of the reverb effect. Turning it clockwise increases the length and spaciousness of the reverb.
- مقبض المزيج: Adjusts the balance between your dry (unaffected) signal and the wet (effected) signal. Turn clockwise for more reverb effect, counter-clockwise for less.
- مقبض النغمة: Shapes the tonal character of the reverb. This control allows you to brighten or darken the shimmer effect, from warm and subtle to crisp and cutting.
- SHIMMER Knob: This dedicated control adds an octave-up effect to the reverb tail, creating the signature ethereal, shimmering sound. Increase for a more pronounced shimmer.
- مفتاح القدم: Engages or disengages the effect. The pedal features true bypass, ensuring your signal remains unaffected when the pedal is off.
صيانة
To ensure the longevity and optimal performance of your FLUORESCENCE SHIMMER REVERB pedal, follow these maintenance guidelines:
- تنظيف: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- تخزين: قم بتخزين الدواسة في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- الاتصالات: افحص جميع توصيلات الكابلات بشكل دوري للتأكد من عدم وجود تلف أو تآكل. تأكد من خلو المقابس من الغبار والشوائب.
- مزود الطاقة: Always use a regulated 9V DC, 100mA (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.
- الرعاية الجسدية: The pedal features a durable metal chassis. However, avoid dropping the unit or subjecting it to excessive force to prevent internal damage.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your FLUORESCENCE SHIMMER REVERB pedal, consult the following common solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد صوت أو إشارة ضعيفة | Incorrect cable connections, faulty cables, no power, pedal disengaged. | Verify all cables are securely connected. Test with different cables. Ensure power supply is connected and functional. Press the footswitch to engage the effect. |
| لا يوجد تأثير تردد | MIX knob set too low, REVERB knob set too low, pedal disengaged. | Increase the MIX and REVERB knob settings. Ensure the pedal is engaged. |
| ضوضاء أو همهمة غير مرغوب فيها | Faulty power supply, ground loop, interference from other pedals/equipment. | Use a high-quality, isolated power supply. Try connecting the pedal to a different power outlet. Ensure all cables are shielded and in good condition. |
| Shimmer effect is too subtle or too intense | SHIMMER knob setting. | Adjust the SHIMMER knob to achieve the desired intensity. Experiment with the TONE knob to fine-tune the character. |
تحديد
- نموذج: FLUORESCENCE SHIMMER REVERB
- ASIN: B079Y519PH
- وزن السلعة: 1.1 جنيه (0.5 كيلوجرام)
- أبعاد المنتج: 5.2 × 2.91 × 2.28 بوصة
- مادة الجسم: معدن
- لون: أزرق
- نوع الموصل: مقبس صوت مقاس 1/4 بوصة (6.35 مم)
- واجهة الأجهزة: صوت 1/4 بوصة
- مصدر الطاقة: كهرباء سلكية
- المجلدtage: 9V DC (100mA, center negative recommended)
- تاريخ التوفر الأول: 27 فبراير 2018
الضمان والدعم
TC Electronic products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official TC Electronic webالموقع أو تواصل مع خدمة العملاء مباشرةً. احتفظ بإثبات الشراء لأي مطالبات بالضمان.
لمزيد من المساعدة، قم بزيارة TC Electronic Store on Amazon.