SONICAKE Rockstage Multi-Effect Pedal User Manual

المنتج انتهىview

The SONICAKE Rockstage is a compact multi-effect pedal designed for guitarists seeking essential classic rock tones in a single, portable unit. It integrates four core effects: Chorus, Distortion, Delay, and Reverb, along with a built-in cabinet simulator for versatile connectivity.

Image: The SONICAKE Rockstage pedal, highlighting its compact design as a "One-Stop Gig Solution" for guitarists.

تتضمن الميزات الرئيسية ما يلي:

• Analog Plexi Style Distortion: Delivers classic 80s/90s hard rock tones.
• BBD-style Analog-sounding Chorus: Adds a warm, dreamy feel to your sound.
• 500ms Analog-Voicing Delay: Expands your tone with rich echoes.
• High Quality Reverb: Provides spacious and ambient textures.
• Built-in Cabinets Simulation: Allows direct connection to PA systems, mixers, or audio interfaces without needing a physical ampمكبر.

ميزات المنتج والضوابط

The Rockstage pedal features intuitive controls for each effect, designed for ease of use during live performance or practice.

الصورة: أكثر منview of the four integrated effects: Chorus, Rock Amp (Distortion), Delay, and Reverb.

قسم الجوقة

The Chorus effect provides lush modulation, adding depth and width to your guitar tone. It features controls for Speed and Depth.

• سرعة: Adjusts the rate of the chorus modulation.
• عمق: Controls the intensity or sweep range of the chorus effect.

Image: The pedal features LED-illuminated knobs for clear visibility of settings, even on a dark stage.

صخر Amp (Distortion) Section

This section provides an analog Plexi-style distortion, delivering classic hard rock tones. It includes Volume, Tone, and Gain controls.

• مقدار: Sets the overall output level of the distortion effect.
• نغمة: Adjusts the tonal character, from darker to brighter distortion.
• يكسب: يتحكم في مقدار التشويش أو التضخيم الزائد.

قسم التأخير

The 500ms analog-voicing delay adds depth and atmosphere to your sound. Controls include Blend, Repeat, and Time.

• مزيج: Mixes the dry signal with the delayed signal.
• يكرر: Controls the number of delay repeats.
• وقت: Adjusts the delay time, up to 500 milliseconds.

قسم الصدى

A high-quality reverb effect expands your tone with spaciousness. It features a single Mix control.

• مزج: Controls the amount of reverb blended with the dry signal.

محاكاة الخزانة

The built-in cabinet simulator allows you to connect the pedal directly to a PA system, mixer, or audio interface, bypassing the need for a traditional guitar ampالمرفأ والخزانة.

Image: The Cabinet Sim switch allows direct connection to audio systems.

Video: A detailed demonstration of the SONICAKE Rockstage Multi Effect Pedal, showcasing its features and sound capabilities, including the cabinet simulation for direct recording or PA connection.

يثبت

1. توصيل الطاقة: Connect a 9V DC power adapter (center negative) to the DC 9V input jack on the pedal. Ensure the power supply meets the pedal's requirements to avoid damage.
2. مدخلات الغيتار: Connect your guitar to the "IN" jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. اتصال الإخراج:
   • ل Ampمكبر: Connect the "OUT" jack on the left side of the pedal to your guitar amplifier's input. Ensure the "CABINET SIM" switch is set to "OFF" if using a physical guitar cabinet.
   • Direct to PA/Mixer/Audio Interface: Connect the "OUT" jack to your PA system, mixer, or audio interface. Set the "CABINET SIM" switch to "ON" to engage the built-in cabinet simulation for a full, amp-like tone.
4. External Pedals (Optional): If using other pedals, connect them in your desired signal chain before or after the Rockstage pedal.

تعليمات التشغيل

Each effect section can be activated or bypassed using its dedicated footswitch. The illuminated knobs indicate the active status of each effect.

• تأثيرات التنشيط: Press the corresponding footswitch for Chorus, Rock Amp, Delay, or Reverb to turn the effect on or off. The LED indicators on the knobs will light up when the effect is active.
• Adjusting Tones: Turn the individual knobs within each effect section (Volume, Tone, Gain for Rock Amp; Speed, Depth for Chorus; Blend, Repeat, Time for Delay; Mix for Reverb) to dial in your desired sound.
• محاكاة الخزانة: Use the "CABINET SIM" toggle switch to enable or disable the cabinet simulation based on your output destination (amplifier vs. direct connection).

Video: A quick demonstration of the SONICAKE multi-effects pedal, showcasing the activation and sound of its various effects, including distortion, delay, and reverb.

فيديو: نظرة شاملةview of the SONICAKE RockStage Multi Effects Pedal, demonstrating its classic rock tones, distortion, chorus, delay, reverb, and cab sim features.

صيانة

• تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف سطح الدواسة. تجنب استخدام المنظفات الكاشطة أو المذيبات.
• تخزين: قم بتخزين الدواسة في بيئة جافة بعيدًا عن درجات الحرارة القصوى وأشعة الشمس المباشرة.
• مزود الطاقة: Always use the correct 9V DC (center negative) power supply. Disconnect power when not in use for extended periods.
• العناية بالكابلات: Ensure all instrument cables are in good condition to prevent signal loss or noise.

استكشاف الأخطاء وإصلاحها

تحديد

• رقم الموديل: QCE-10
• وزن السلعة: 1.06 جنيه (0.48 كيلوجرام)
• أبعاد المنتج: 10.31 بوصة طول × 2.52 بوصة عرض × 1.73 بوصة ارتفاع (2.72 × 16.14 × 2.32 بوصة)
• مصدر الطاقة: كهرباء سلكية (9 فولت تيار مستمر)
• تنسيق الإشارة: التناظرية
• واجهة الأجهزة: صوت 1/4 بوصة
• لون: Chorus Delay Reverb Distortion
• أول متاح: 23 نوفمبر 2017

الضمان والدعم

يرجى الرجوع إلى عبوة المنتج أو إلى الموقع الرسمي للشركة المصنعة. website for specific warranty information and customer support details. No specific warranty information was provided in the product data.