دليل مستخدم مجموعة إضاءة الدراجة من لوكس باور

1. انتهى المنتجview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. محتويات العبوة

يرجى التأكد من أن جميع العناصر المدرجة أدناه متضمنة في الحزمة الخاصة بك:

• 1 x LuxPower LED Headlight (300 Lumens)
• 1 x LuxPower LED Taillight
• 2 × كابلات شحن USB
• 1 x Headlight Mounting Bracket
• 1 x Taillight Mounting Strap
• 1 × دليل المستخدم

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. الإعداد والتثبيت

3.1 تركيب المصابيح الأمامية

1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
2. Slide the LuxPower headlight onto the bracket until it clicks into place.
3. Adjust the angle of the headlight to illuminate the path ahead without blinding oncoming traffic.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 تركيب المصابيح الخلفية

1. لف حزام تثبيت المصباح الخلفي حول عمود مقعد دراجتك.
2. Secure the strap firmly, ensuring the taillight is facing directly backward.
3. Adjust the position to ensure maximum visibility from the rear.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. تعليمات التشغيل

4.1 تشغيل/إيقاف التشغيل

• To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
• To turn off the light, press and hold the power button again for 2 seconds.

4.2 اختيار الوضع

بمجرد تشغيل الضوء، اضغط لفترة قصيرة على زر الطاقة للتبديل بين أوضاع الإضاءة المتاحة:

• عالي: Maximum brightness for optimal visibility.
• واسطة: سطوع متوازن للاستخدام العام.
• قليل: Reduced brightness for extended battery life.
• Flash/Strobe: Flashing pattern for increased daytime visibility or emergency signaling.

4.3 شحن الأضواء

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
2. افتح الغطاء المطاطي برفق.
3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
5. Once fully charged, disconnect the cable and firmly close the rubber flap to maintain water resistance.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. الصيانة

• تنظيف: Wipe the light units with a soft, damp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
• العناية بالبطارية: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
• تخزين: Store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
• مقاومة الماء: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6. استكشاف الأخطاء وإصلاحها

7. المواصفات

8. الضمان والدعم

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower webموقع.

يرجى الاحتفاظ بإثبات الشراء الخاص بك لاستخدامه في أي مطالبات بالضمان.