Lepro Industrial LED Desk Lamp

مقدمة

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. هذا متعدد الاستخداماتamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

يرجى قراءة هذا الدليل بعناية قبل التثبيت والتشغيل، والاحتفاظ به للرجوع إليه في المستقبل.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

تعليمات السلامة

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• استخدم فقط المصابيح ذات القاعدة E27 ذات القدرة القصوىtagهـ من 40 واط.
• لا تستخدم لamp بسلك طاقة أو قابس تالف.
• هذا المنتج مخصص للاستخدام الداخلي فقط. لا تعرضه للماء أو الرطوبة العالية.
• ابقي على لamp بعيدًا عن المواد القابلة للاشتعال.
• لا تحاول تفكيك أو إصلاح الجهاز.amp اتصل بنفسك. تواصل مع موظفين مؤهلين للحصول على الخدمة.

محتويات الحزمة

يرجى التحقق من الحزمة للعناصر التالية:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• دليل المستخدم

ملاحظة: المصباح E27 غير متضمن ويجب شراؤه بشكل منفصل.

الإعداد والتثبيت

Follow these steps to assemble and install your desk lamp:

1. قم بإرفاق Clamp: ربط cl بشكل آمنamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. قم بتجميع حرف L.amp رأس: تثبيت lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. أدخل الذراع: أدخل l بعنايةamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. تثبيت اللمبة: تأكد من لamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp المقبس. لا تفرط في شده.
5. الاتصال بالطاقة: قم بتوصيل lampقم بتوصيل سلك الطاقة الخاص بالجهاز بمأخذ كهربائي مناسب.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

الصورة: لamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

تعليمات التشغيل

تشغيل/إيقاف التشغيل: Locate the rocker switch on the power cord. Press the switch to turn the lamp تشغيل أو إيقاف.

ضبط زاوية الضوء: لamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

الصورة: لamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

صيانة

تنظيف: لتنظيف لamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

استبدال المصباح: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp العودة إلى الداخل.

استكشاف الأخطاء وإصلاحها

• Lamp لا تفتح:
  • تأكد من توصيل سلك الطاقة بالمأخذ بشكل آمن.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • تحقق من مأخذ الطاقة عن طريق توصيل جهاز آخر.
• الضوء يومض:
  • تأكد من إحكام ربط المصباح.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp غير مستقر:
  • تأكد من أن clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • تأكد من أن لamp arm is properly inserted into the clamp مشترك.

تحديد

Image: Product dimensions and key features like E27 bulb base and power cord length.

الضمان والدعم

ضمان: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

دعم العملاء: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.