mophie 3673_JPA-IP7

mophie Juice Pack Wireless Charging Protective Power Pack Case for iPhone 7, iPhone 8, and iPhone SE User Manual

Model: 3673_JPA-IP7

مقدمة

The mophie Juice Pack Wireless Charging Protective Power Pack Case is designed to extend the battery life of your iPhone 7, iPhone 8, or iPhone SE while providing enhanced protection. This case integrates Charge Force Technology, allowing for convenient wireless charging with Qi-enabled systems and other compatible wireless charging accessories. It also features pass-through charge and sync capabilities.

الأجهزة المتوافقة: iPhone 7, iPhone 8, iPhone SE (4.7-inch models)

ماذا يوجد في الصندوق

  • mophie Juice Pack Case
  • كابل ميكرو يو اس بي
  • دليل البدء السريع

يثبت

تثبيت جهاز iPhone الخاص بك

  1. Separate the top cap from the main body of the Juice Pack case.
  2. Slide your iPhone into the bottom section of the Juice Pack case, ensuring the Lightning connector on the phone properly aligns and connects with the connector inside the case.
  3. Once the iPhone is seated, slide the top cap back onto the case until it clicks securely into place.
أمام view of mophie Juice Pack case with iPhone installed

الشكل 1: الجبهة view of the mophie Juice Pack case with an iPhone installed.

خلف view of mophie Juice Pack case with iPhone installed, showing LED indicators

الشكل 2: العودة view of the mophie Juice Pack case with an iPhone installed, highlighting the LED indicators.

الشحن الأولي

Before first use, fully charge your mophie Juice Pack case. Connect the included Micro USB cable to the charging port on the bottom of the case and plug the other end into a USB power adapter (not included) or a computer's USB port. The LED indicator lights on the back of the case will illuminate to show charging progress.

Operating the Juice Pack

Activating/Deactivating Charging

To begin charging your iPhone from the Juice Pack case, press and hold the power button on the back of the case for 2 seconds. The LED indicator lights will illuminate, and your iPhone will begin charging. To stop charging, press and hold the power button again for 2 seconds.

أضواء مؤشر LED

The four LED lights on the back of the Juice Pack case indicate the remaining battery charge and charging status:

  • 4 أضواء ثابتة: 75-100٪ مشحونة
  • 3 أضواء ثابتة: 50-74٪ مشحونة
  • 2 أضواء ثابتة: 25-49٪ مشحونة
  • 1 ضوء ثابت: 1-24٪ مشحونة
  • الأضواء الساطعة: العلبة قيد الشحن

Wireless Charging (Charge Force Technology)

The mophie Juice Pack case features Charge Force Technology, making it compatible with Qi-enabled wireless charging systems. To wirelessly charge your iPhone and Juice Pack case:

  1. Place the Juice Pack case (with your iPhone inside) onto a compatible Qi wireless charging pad or Charge Force accessory.
  2. Ensure the case is properly aligned with the charging surface. Magnetic Charge Force accessories will automatically align the case for optimal charging.
  3. Charging will begin automatically. The LED indicator lights on the case will flash to confirm charging is active.
Magnetic Wireless Docks showing various mophie charging accessories

Figure 3: The mophie Juice Pack case is compatible with various magnetic wireless charging docks and pads.

Pass-Through Charge and Sync

When connected to a computer via the Micro USB cable, the Juice Pack case enables pass-through charging and data synchronization. Your iPhone will charge first, followed by the Juice Pack case. Data transfer between your iPhone and computer will also occur as normal.

Product Video: mophie Juice Pack Air Overview

الفيديو الثاني: يقدم هذا الفيديو لمحة موجزة عنview of the mophie Juice Pack Air, demonstrating its features and functionality.

صيانة

تنظيف

To clean your mophie Juice Pack case, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the case's finish or internal components.

تخزين

When storing the Juice Pack case for extended periods, ensure it is partially charged (around 50%) to maintain battery health. Store in a cool, dry place away from direct sunlight and extreme temperatures.

استكشاف الأخطاء وإصلاحها

Case Not Charging iPhone

  • Ensure the iPhone is correctly seated in the case and the Lightning connector is fully engaged.
  • Verify the Juice Pack case itself has sufficient charge by checking the LED indicators.
  • اضغط مع الاستمرار على زر الطاقة لمدة 2 ثوانٍ لتفعيل الشحن.

Case Not Recharging

  • Check the Micro USB cable and power adapter for damage. Try a different cable or adapter if available.
  • Ensure the Micro USB cable is securely connected to both the case and the power source.
  • If using wireless charging, ensure the case is properly aligned on a compatible Qi charging pad.

مؤشرات LED لا تعمل

  • Attempt to charge the case using the Micro USB cable. If the lights still do not illuminate, contact customer support.

تحديد

ميزةالتفاصيل
ماركةموفي
موديلات الهواتف المتوافقةiPhone 7, iPhone 8, iPhone SE
لونأسود
مادةالبلاستيك والسيليكون
مستوى مقاومة الماءغير مقاوم للماء
مميزات اضافيةHeavy Duty Protection, Lightweight, Wireless Charging Compatible
حجم الشاشة4.7 بوصة
أبعاد العنصر2.81 × 0.66 × 4.14 بوصة
رقم الموديل3673_JPA-IP7-BLK
وزن العنصر3.51 أونصة
رمز المنتج الموحد810472036731

الضمان والدعم

معلومات الضمان

The mophie Juice Pack Wireless Charging Protective Power Pack Case comes with a ضمان محدود لمدة سنة واحدة. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official mophie webموقع.

دعم العملاء

For further assistance, technical support, or warranty claims, please visit the official mophie support webيمكنك زيارة موقعهم الإلكتروني أو الاتصال بقسم خدمة العملاء. ستجد غالبًا الأسئلة الشائعة، وأدلة استكشاف الأخطاء وإصلاحها، ومعلومات الاتصال على موقعهم. webموقع.

قم بزيارة mophie Store on Amazon لمزيد من المعلومات عن المنتج.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.