مقدمة
This manual provides essential information for the safe installation, operation, and maintenance of your Heathco HZ-5846-WH Motion Activated LED Security Light. This fixture is designed to provide reliable outdoor lighting with energy-efficient LED technology and motion detection capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Image: Heathco HZ-5846-WH Motion Activated LED Security Light, showing the two adjustable lamp heads and the motion sensor below.
معلومات السلامة
تحذير: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electrical Code (NEC).
- يجب تثبيت هذا المنتج بواسطة كهربائي مؤهل.
- ضمان حجم العرضtage is 120 VAC, 60 Hz.
- لا تحاول تفكيك أو تعديل الجهاز. لا توجد أجزاء قابلة للصيانة من قبل المستخدم في الداخل.
- Avoid looking directly into the LED light source when illuminated, as this may cause eye damage.
- Mount the fixture securely to a structural surface.
الإعداد والتثبيت
The Heathco HZ-5846-WH security light is designed for either wall mount or eave mount installation. Ensure the mounting location provides adequate coverage for the desired detection area and is within reach of the electrical supply.
خطوات التثبيت:
- انقطاع التيار الكهربائي: Turn off power at the circuit breaker or fuse box before beginning installation.
- مكان التركيب: Select a suitable wall or eave location. The fixture should be mounted at a height that allows for optimal motion detection and light coverage.
- التوصيلات الكهربائية: Connect the fixture's wires to the household wiring according to local electrical codes. Typically, this involves connecting the black wire to live, white wire to neutral, and green/bare copper wire to ground.
- تركيبات آمنة: Mount the fixture securely to the junction box or mounting surface using the provided hardware.
- ضبط L.amp الرؤوس والمستشعرات: لamp heads and motion sensor are tool-free adjustable. Position them to cover the desired area.
- استعادة الطاقة: بمجرد اكتمال التثبيت وتأمين جميع التوصيلات، قم باستعادة الطاقة عند قاطع الدائرة.
تعليمات التشغيل
Your Heathco HZ-5846-WH security light features a 180-degree motion detection zone and adjustable settings for optimal performance.
تعديل مستشعر الحركة:
- يتراوح: The motion sensor can detect movement up to 40 feet. Adjust the sensor's angle to modify the detection range and area. Avoid pointing the sensor at heat sources or moving objects (e.g., trees, traffic) that could cause false triggers.
- في الوقت المناسب: The light-on time can be adjusted up to 5 minutes. Use the control dial (if present, typically on the sensor unit) to set how long the light remains illuminated after motion is detected.
التجاوز اليدوي:
This fixture includes a manual override function. To activate the manual override, quickly turn the light switch OFF then ON. The light will remain ON continuously. To return to motion-activated mode, quickly turn the light switch OFF then ON again. The light will then operate based on motion detection.
صيانة
The Heathco HZ-5846-WH security light utilizes energy-saving LED technology, meaning you will never need to change a bulb.
- تنظيف: To maintain the appearance and performance of your fixture, periodically clean the lens and housing with a soft, damp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
- تقتيش: افحص الجهاز بشكل دوري بحثًا عن أي علامات تلف أو توصيلات مفكوكة. في حال وجود أي مشكلة، افصل التيار الكهربائي واستشر فني كهرباء مؤهل.
استكشاف الأخطاء وإصلاحها
If your security light is not functioning as expected, refer to the following common issues and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يعمل. | No power; faulty wiring; sensor not detecting motion. | Check circuit breaker; verify wiring connections; adjust sensor angle and range. |
| يبقى الضوء قيد التشغيل بشكل مستمر. | Manual override activated; constant motion in detection zone; faulty sensor. | Toggle power switch to reset manual override; reposition sensor; contact support if sensor is faulty. |
| Light turns ON/OFF frequently. | Sensor detecting unwanted motion (e.g., trees, traffic, animals). | Adjust sensor angle and sensitivity to exclude unwanted motion sources. |
| مدى الكشف ضعيف. | Sensor obstructed or incorrectly aimed. | Clear obstructions; adjust sensor angle for optimal coverage. |
إذا لم تنجح خطوات استكشاف الأخطاء وإصلاحها في حل المشكلة، فيرجى الاتصال بدعم العملاء.
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | HZ-5846-WH |
| ماركة | جلوب الكتريك |
| مصدر الضوء | الصمام المتكامل |
| سطوع | 1250 لومن |
| درجة حرارة اللون | 5296 كلفن |
| واتtage | 13.73 واط |
| زاوية كشف الحركة | 180 درجة |
| نطاق كشف الحركة | حتى 40 قدم |
| Adjustable On-Time | حتى 5 دقيقة |
| مصدر الطاقة | Corded Electric (120 VAC, 60 Hz) |
| مادة | Polycarbonate (Shade), Metal (Fixture) |
| نوع التركيب | Wall Mount or Eave Mount |
| مستوى مقاومة الماء | ضد للماء |
| الأبعاد (الطول × العرض × الارتفاع) | 7.54 بوصة × 6.79 بوصة × 6.22 بوصة |
| وزن العنصر | 1.9 رطل |
| رمز المنتج الموحد | 016963158467 |
Image: Dimensions of the Heathco HZ-5846-WH security light, showing length (7.54"), width (6.79"), and height (6.22").
الضمان والدعم
معلومات الضمان:
The manufacturer warranty description for this product is غير قابل للتطبيق. Please refer to your retailer's return policy for details regarding returns or exchanges.
دعم العملاء:
For further assistance, technical support, or inquiries regarding your Heathco HZ-5846-WH Motion Activated LED Security Light, please contact Globe Electric customer service. Refer to the product packaging or the Globe Electric webالموقع للحصول على معلومات الاتصال الحالية.