somfy 1001814

Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V Motor Instruction Manual

1. المقدمة

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V motor. Please read these instructions carefully before proceeding with any installation or operation. Retain this manual for future reference.

2. معلومات السلامة

  • Ensure all electrical connections are performed by a qualified electrician and comply with local electrical codes.
  • افصل الطاقة قبل القيام بأي إجراءات صيانة أو تركيب.
  • Do not allow children to operate the motor or controls.
  • أبقِ يديك وملابسك الفضفاضة بعيدة عن الأجزاء المتحركة أثناء التشغيل.
  • This motor is designed for specific applications. Do not use it for purposes other than those specified by Somfy.

3. انتهى المنتجview

The Somfy LT50 506S2 Sonesse motor is a tubular motor designed for various applications requiring precise and quiet operation, such as motorized blinds, shades, or projection screens. It operates at 120V and provides 6Nm of torque at 32 RPM.

Somfy LT50 506S2 Sonesse Motor

الشكل 3.1: عام view of the Somfy LT50 506S2 Sonesse Motor.

Motor end cap detail

Figure 3.2: Detail of the motor's end cap, showing the output shaft connection point.

Motor with drive and mounting components

Figure 3.3: The motor shown with typical drive and mounting components (accessories not included).

4. الإعداد والتثبيت

Installation of the Somfy LT50 506S2 Sonesse motor requires careful attention to detail and adherence to electrical safety standards. It is recommended that installation be performed by a professional installer.

4.1 المكونات المطلوبة (غير مشمولة)

Please note that essential accessories such as the crown, drive, and mounting plate are not included with the motor and must be acquired separately to complete the installation.

4.2 التوصيل الكهربائي

The motor includes a power cord for connection to a 120V power supply. Ensure the power supply is disconnected before making any connections. Follow the wiring diagram provided with your specific application or consult a qualified electrician.

4.3 التركيب

Mount the motor securely within its intended housing or bracket. Ensure the motor is level and properly aligned with the driven component (e.g., shade tube). Refer to the specific mounting instructions for your application.

4.4 Limit Setting

After physical installation and electrical connection, the motor's upper and lower travel limits must be set. Consult the specific instructions for your control system (e.g., remote control, wall switch) to program these limits accurately.

5. تعليمات التشغيل

Once installed and limits are set, the motor can be operated using a compatible Somfy control device (e.g., remote, wall switch, smart home system). Refer to your control device's manual for specific operating procedures.

  • لأعلى/مفتوح: Press the 'Up' or 'Open' button to raise the blind/shade or open the screen.
  • انخفاض/إغلاق: Press the 'Down' or 'Close' button to lower the blind/shade or close the screen.
  • Stop/My: Press the 'Stop' or 'My' button to halt the motor at any desired position. The 'My' button can also be programmed for a favorite intermediate position.

6. الصيانة

The Somfy LT50 506S2 Sonesse motor is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

  • تنظيف: Keep the motor area clean and free from dust and debris. Do not use abrasive cleaners or solvents.
  • تقتيش: Periodically inspect the power cord for any signs of damage. Ensure all mounting hardware remains secure.
  • تشحيم: المحرك مُشحم من المصنع ولا يتطلب تشحيمًا إضافيًا.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your motor, refer to the following common troubleshooting steps:

مشكلةالسبب المحتملحل
المحرك لا يستجيبلا يوجد مصدر للطاقة
Faulty control device
تنشيط حماية المحرك الزائد
التحقق من توصيل الطاقة وقاطع الدائرة
Test with another control device if available
Allow motor to cool down (if it has been running continuously)
Motor runs but blind/shade does not moveDrive or crown not properly engaged
عرقلة
Verify proper installation of drive and crown
Check for any physical obstructions
Motor stops prematurely or limits are incorrectLimits incorrectly setRefer to your control device manual to reset the motor limits

إذا استمرت المشكلة بعد تجربة هذه الحلول، فيرجى الاتصال بدعم عملاء Somfy أو فني مؤهل.

8. المواصفات

مواصفةقيمة
ماركةسومفي
رقم الموديل1001814
سرعة32 دورة في الدقيقة
المجلدtage120 فولت
الشركة المصنعةسومفي
رمز المنتج الموحد685248788080
ASINB01N7NITLC
رقم GTIN685248788080

9. معلومات الضمان

The Somfy LT50 506S2 Sonesse motor comes with a ضمان لمدة 5 سنوات. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Somfy webالموقع أو الاتصال بدعم العملاء.

10. الدعم

For further assistance, technical support, or to inquire about accessories, please visit the official Somfy webيمكنك العثور على معلومات الاتصال على الموقع الإلكتروني أو الاتصال بقسم خدمة العملاء. متجر سومفي على أمازون or directly on the manufacturer's webموقع.

© 2026 Somfy. جميع الحقوق محفوظة.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.