Aideepen TDA7492P 2x50W Dual Channel Ampدليل مستخدم لوحة مكبر الصوت

1. انتهى المنتجview

The Aideepen TDA7492P 2x50W Dual Channel Amplifier Board is designed to provide high-quality stereo audio amplification for various speaker systems. Featuring Bluetooth wireless connectivity, this board is suitable for home or vehicle audio streaming applications.

المميزات الرئيسية:

• 50W+50W HIFI Board: Delivers 2x50W of power for multi-speaker setups with 8 ohms impedance.
• Upgraded Version (AD-001): Incorporates the TDA7492P chip with enhanced capacitor resistance for improved stereo sound and better heat dissipation. Features gold-plated mounting holes for durability and aesthetics.
• الاتصال عبر البلوتوث: Compatible with most smartphones for wireless music streaming. Note: Not compatible with computers.
• Integrated Control Buttons: Includes responsive buttons for power, previous track, next track, play/pause, volume up, and volume down. A Bluetooth indicator flashes red and blue alternately when ready for pairing.
• Compact Design, Powerful Sound: Despite its small size, this amplifier can achieve 110-120 dB output with high-efficiency drivers.

الشكل 1.1: الجزء العلوي view of the Aideepen TDA7492P Dual Channel Ampمجلس الليفر.

2. محتويات العبوة

Ensure all items are present and in good condition upon opening the package.

• 1x TDA7492P Audio Receiver Ampمجلس lifier

الشكل 2.1: amplifier board as received in its packaging.

3. معلومات السلامة

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• مزود الطاقة: Use a DC power supply between 8V and 24V. Ensure the power supply's output current is sufficient (at least 2A recommended for optimal performance). The power connector is 5.5mm outside diameter, 2.1mm inside diameter, with positive on the inside and negative on the outside.
• التوصيلات الكهربائية: Always distinguish between positive and negative terminals when connecting speakers. Incorrect wiring can damage the amplifier board or speakers.
• بيئة: Do not expose the device to moisture, extreme temperatures, or direct sunlight. Operate in a well-ventilated area.
• التعامل: Avoid touching the circuit board components while the device is powered on.

4. تعليمات الإعداد

Follow these steps to set up your Aideepen TDA7492P ampمجلس lifier.

1. Prepare Speakers: Ensure your speakers are rated for 8 ohms impedance. Strip a small amount of insulation from the ends of your speaker wires.
2. ربط مكبرات الصوت: Loosen the screws on the green terminal blocks (speaker outputs) on the amplifier board. Carefully insert the speaker wires, ensuring the positive (+) and negative (-) wires are connected to the corresponding terminals for each channel (L+ L- for left, R+ R- for right). Tighten the screws to secure the wires.
3. توصيل الطاقة: Plug a compatible DC power adapter (8-24V, at least 2A, 5.5x2.1mm barrel connector, center positive) into the power input jack on the board.
4. تشغيل الطاقة: After connecting the power, the Bluetooth indicator LED on the board will begin to flash, indicating it is ready for pairing.

الشكل 4.1: مفصل view of speaker and power connection points on the ampمجلس lifier.

Figure 4.2: Labeled diagram of the amplifier board showing Bluetooth antenna, indicator, buttons, and power interface.

5. تعليمات التشغيل

بمجرد amplifier board is set up, you can begin streaming audio wirelessly.

1. الاقتران بلوتوث:
   • تأكد من amplifier board is powered on and the Bluetooth indicator is flashing (red and blue alternately).
   • على هاتفك الذكي أو أي جهاز آخر يدعم تقنية Bluetooth، انتقل إلى إعدادات Bluetooth.
   • بحث عن الأجهزة المتاحة. amplifier board will typically appear as "SANWU Audio" or a similar identifier.
   • حدد amplifier board to pair. Once connected, the Bluetooth indicator LED will typically show a solid blue light or a slower flash.
2. تشغيل الصوت:
   • Open your preferred music player application on your connected device.
   • Start playing audio. Sound will be routed through the amplifier board to your connected speakers.
3. Using On-Board Controls: ال amplifier board features several buttons for direct control:
   • تشغيل/إيقاف مؤقت: تبديل التشغيل.
   • السابق: يتخطى إلى المسار السابق.
   • التالي: يتخطى إلى المسار التالي.
   • المجلد +: يزيد الحجم.
   • المجلد-: يقلل الحجم.

الشكل 5.1: amplifier board connected to speakers and streaming music from a smartphone via Bluetooth.

6. الصيانة

تضمن الصيانة المناسبة طول عمر جهازك وأدائه الأمثل ampمجلس lifier.

• تنظيف: Use a soft, dry cloth to gently wipe the surface of the board. Avoid using liquid cleaners or solvents, as these can damage components.
• تخزين: When not in use for extended periods, store the board in a cool, dry place away from direct sunlight and dust.
• التعامل: Always handle the board by its edges to avoid touching sensitive electronic components.

7. استكشاف الأخطاء وإصلاحها

إذا واجهت مشاكل مع amplifier board, refer to the following common problems and solutions:

8. المواصفات

Detailed technical specifications for the Aideepen TDA7492P Ampمجلس الليفر.

9. الضمان والدعم

The Aideepen TDA7492P Dual Channel Amplifier Board comes with a 6-month extended warranty.

For technical assistance, troubleshooting, or warranty claims, please contact Aideepen customer service. Our team is available 24/7 to provide friendly support.

معلومات الاتصال:

• Webموقع: www.aideepen.com (يرجى مراجعة المصدر الرسمي) web(للحصول على أحدث معلومات الاتصال، يرجى زيارة الموقع الإلكتروني.)
• بريد إلكتروني: يرجى الرجوع إلى عبوة المنتج أو الموقع الرسمي webموقع للدعم بالبريد الإلكتروني.