1. المقدمة
Thank you for choosing the Value 17.99.1144 Swivel TV Wall Mount. This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and retain it for future reference.
This wall mount is designed for secure wall mounting of LCD screens, offering flexibility with its swivel and tilt capabilities. It features integrated cable management for a tidy installation.
2. معلومات السلامة
تحذير: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.
- تأكد من أن سطح التثبيت يمكنه دعم الوزن الإجمالي للحامل والتلفزيون بأمان.
- لا تتجاوز سعة الحمولة القصوى البالغة 35 كجم (77 رطلاً).
- هذا المنتج مخصص للاستخدام الداخلي فقط.
- Use appropriate tools and follow all drilling and mounting instructions carefully.
- إذا لم تكن متأكدًا من أي جزء من عملية التثبيت، فاستشر متخصصًا مؤهلًا.
- احتفظ بالأطفال والحيوانات الأليفة بعيدًا أثناء التثبيت.
- Regularly check that the mount is securely fastened and that all connections are tight.
3. محتويات العبوة
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact your retailer for assistance.
- مجموعة تثبيت التلفزيون على الحائط (الذراع الرئيسي ولوحة التثبيت على الحائط)
- TV Mounting Brackets (Varies based on VESA size)
- Mounting Hardware Kit (Screws, anchors, washers, spacers)
- دليل التعليمات
الصورة: الجبهة view of the Value 17.99.1144 Swivel TV Wall Mount, showing the main wall plate, articulating arm, and TV mounting plate. This image illustrates the primary components of the mount.
Image: Close-up of the wall plate component of the TV mount, which attaches directly to the wall. It features multiple mounting holes for secure installation.
4. الإعداد والتثبيت
Before installation, ensure you have the necessary tools (e.g., drill, level, stud finder, screwdriver) and that the wall structure is suitable for mounting.
4.1. تركيب لوحة الحائط
- تحديد موضع التثبيت: Determine the desired height and center of your TV on the wall. Use a stud finder to locate wooden studs if mounting on drywall, or ensure you have appropriate anchors for concrete/brick walls.
- تحديد أماكن حفر الثقوب: Hold the wall plate against the wall at the desired position and use a pencil to mark the drill holes. Use a level to ensure it is straight.
- ثقوب الحفر: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors/screws provided.
- لوحة تثبيت جدارية آمنة: Attach the wall plate to the wall using the provided screws and anchors. Ensure it is firmly secured and level.
الصورة: مفصلة view of the wall plate, highlighting the various mounting holes and structural design for secure attachment to a wall surface.
4.2. Attaching Brackets to TV
- تحديد نمط VESA: Locate the mounting holes on the back of your TV. These holes form a VESA pattern (e.g., 200x200mm, 400x400mm).
- Select Screws and Spacers: Choose the correct diameter and length of screws from the hardware kit that fit your TV's mounting holes. Use spacers if the TV back is uneven or if cables interfere.
- ربط الأقواس: Secure the TV mounting brackets to the back of your TV using the selected screws and washers. Ensure they are tightened securely but do not overtighten.
Image: Close-up of the articulating arm and the TV mounting plate, showing the connection points and the mechanism for adjusting the TV's position.
4.3. Mounting TV to Wall Plate
- Hook TV onto Mount: Carefully lift the TV (with brackets attached) and hook the brackets onto the TV mounting plate of the wall mount assembly. It is recommended to have at least two people for this step.
- تلفزيون آمن: Once the TV is hooked, secure it to the mount using the safety screws or locking mechanisms provided. Refer to the specific instructions for your mount model.
الصورة: الجانب view of the TV wall mount with its articulating arm fully extended, demonstrating the range of motion and the distance it can extend from the wall.
4.4. إدارة الكابلات
Route your TV cables through the integrated cable management channels on the mount's arm. This helps to keep cables tidy and prevents them from being pinched or damaged during adjustments.
5. تشغيل حامل التلفزيون الجداري
This wall mount allows for flexible positioning of your TV.
- قطب: Gently push or pull the TV to swivel it horizontally. The mount allows for a wide range of horizontal movement, up to 180 degrees depending on TV size and wall clearance.
- الإمالة: The TV can be tilted vertically to achieve the optimal viewing angle. The maximum tilt angle is 15 degrees downwards and 5 degrees upwards. Loosen any tilt adjustment knobs (if present) before tilting, and retighten afterwards.
- تعديل المستوى: The mount also allows for a slight level adjustment of +/- 3 degrees to ensure the TV is perfectly horizontal after installation.
Image: Technical diagram illustrating the dimensions of the TV wall mount, including its extension range (min 49mm - max 615mm), height (292mm), and width (72mm at wall plate). It also shows the tilt angles (+5° to -15°) and level adjustment (±3°), and the 180° swivel capability.
6. الصيانة
تضمن الصيانة المنتظمة طول عمر وتشغيل حامل التلفزيون الخاص بك بشكل آمن.
- التفتيش الدوري: Every few months, check all screws and bolts to ensure they are tight and secure.
- تنظيف: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- تشحيم: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult customer support.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| التلفاز ليس مستويا. | Wall plate not level during installation, or minor adjustment needed. | Use the built-in level adjustment feature (±3 degrees) to correct. If the wall plate is significantly off, re-install. |
| يبدو الحامل مرتخياً أو متذبذباً. | Mounting screws are loose, or wall anchors are not secure. | Tighten all mounting screws. If the issue persists, inspect wall anchors and consider re-mounting with stronger anchors or in a different location. |
| Difficulty swiveling or tilting TV. | Joints are too tight, or cables are obstructing movement. | Check for cable obstructions. If joints are too tight, consult the manual for adjustment points (if applicable) or contact support. Do not force movement. |
8. المواصفات
| رقم الموديل: | 17991144 |
| ماركة: | قيمة |
| نوع التركيب: | حامل الحائط |
| نوع الحركة: | قطب ، إمالة |
| مادة: | معدن |
| سعة التحميل القصوى: | 35 كجم (77 رطل) |
| أحجام التلفزيون المتوافقة: | 31 - 65 بوصة |
| زاوية الميل القصوى: | 15 Degrees (downwards), 5 Degrees (upwards) |
| نطاق الدوران: | Up to 180 Degrees (depending on TV size) |
| تعديل المستوى: | ±3 درجة |
| Product Dimensions (folded): | 40 × 62 × 40 سم (تقريبًا، وفقًا لبيانات المنتج) |
| وزن السلعة: | 3.3 كجم |
9. الضمان والدعم
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Value stands behind the quality of its products.
If you encounter any issues or have questions regarding the installation or operation of your Value 17.99.1144 TV Wall Mount, please contact Value customer support through your retailer or the official Value webموقع للحصول على المساعدة.