مقدمة
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your AIBOO Dimmable LED Under Cabinet Puck Lights. Please read this manual thoroughly before installation and use to ensure proper function and safety.
محتويات الحزمة
تأكد من تضمين جميع المكونات المدرجة أدناه في الحزمة الخاصة بك:
- 3 × مصابيح LED
- 1 x 3-Way Splitter
- 1 × جهاز التحكم عن بعد RF
- 1 × وحدة تحكم LED
- 1 × محول طاقة 12 فولت 0.5 أمبير
- 1 x On/Off Switch Cable
- 6 × ملصقات لاصقة
- 6 × مسامير التثبيت
الشكل 1: All components included in the package. This image displays the puck lights, splitter, remote, controller, adapter, on/off switch, stickers, and screws.
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | YK-300000197 |
| ماركة | ايبو |
| Puck Light Dimensions (L x W x H) | 6 x 6 x 0.8 cm (2.3 x 2.3 x 0.3 inches) |
| وزن | 204 جرام (الحزمة الكاملة) |
| Number of Puck Lights | 3 |
| حجم الإدخالtage | 110 فولت |
| واتtagهـ (لكل ضوء) | 2 واط |
| بطارية جهاز التحكم عن بعد | شنومكس x كرسنومكس (وشملت) |
| رمز المنتج العالمي / رقم GTIN | 712411876784 |
الشكل 2: Product dimensions and cable lengths. This image provides measurements for the puck lights and connecting cables.
الإعداد والتثبيت
Follow these steps to properly install your LED puck lights:
- وضع الخطة: Determine the desired locations for your three puck lights under your cabinet or shelf. Ensure the cables can reach the central splitter and power source.
- أضواء جبل باك:
- استخدام الملصقات اللاصقة: Peel the backing from the adhesive stickers and firmly press them onto the back of each puck light. Then, press the lights onto the desired clean, dry surface.
- استخدام البراغي: For a more permanent installation, use the provided screws to mount the puck lights. Mark the screw holes, pre-drill if necessary, and secure the lights.
- Connect Puck Lights to Splitter: Connect the cable from each puck light to one of the three ports on the 3-way splitter.
- Connect Splitter to Controller: Connect the main cable from the 3-way splitter to the input port of the LED controller.
- Connect On/Off Switch (Optional): If you wish to use the inline on/off switch, connect the LED controller to the switch cable. If not, proceed to the next step.
- Connect On/Off Switch (or Controller) to Power Adapter: Connect the output of the on/off switch cable (or directly from the LED controller if not using the switch) to the 12V 0.5A power adapter.
- قم بتوصيل الطاقة: قم بتوصيل محول الطاقة بمأخذ كهربائي قياسي بجهد 110 فولت.
- إدارة الكابلات: Secure any excess cabling using cable clips or ties (not included) for a neat and safe installation.
تعليمات التشغيل
Your AIBOO LED puck lights are controlled by the included RF remote. Ensure the remote has a working CR2 battery installed.
الشكل 3: RF Remote Control Functions (New Version). This image details the buttons and their corresponding actions for controlling the lights.
- تشغيل/إيقاف التشغيل: اضغط على ON button to turn the lights on. Press the عن زر لإيقاف تشغيلها.
- ضبط السطوع:
- استخدم برايت+ و ساطع- buttons to gradually increase or decrease the light intensity.
- استخدم 100%, 50%، و 25% أزرار لضبط السطوع السريع.
- Pairing/Decoding Remote: If the remote does not control the lights, or if you are pairing a new remote, press the زوج or فك الشفرة button. The lights will flicker to indicate successful pairing.
- وظيفة المؤقت: Set an automatic shut-off timer by pressing the 1H, 2H, 4H، أو 8H buttons. The lights will turn off after the selected duration.
الشكل 4: Adjustable Brightness Levels. This image illustrates the range of brightness settings available via the remote control.
صيانة
- تنظيف: Disconnect power before cleaning. Use a soft, dry cloth to wipe the puck lights and remote control. Do not use abrasive cleaners or solvents.
- استبدال البطارية عن بعد: If the remote control's range decreases or it stops responding, replace the CR2 battery. Refer to the remote's battery compartment for instructions on how to open and replace the battery.
- العناية العامة: Avoid exposing the lights or controller to excessive moisture or extreme temperatures.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الأضواء لا تعمل. |
|
|
| جهاز التحكم عن بعد لا يستجيب. |
|
|
| تومض الأضواء أو تخفت بشكل غير متوقع. |
|
|
الضمان والدعم
AIBOO products are designed for reliability and performance. For specific warranty information or technical support, please refer to the product packaging or contact AIBOO customer service directly through their official website or the retailer where the product was purchased. Please have your model number (YK-300000197) and purchase date available when contacting support.