مقدمة
This manual provides detailed instructions for the proper use, setup, operation, and maintenance of your INSIZE 2167-25 Electronic Snap Gage. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolong its lifespan.
المنتج انتهىview
The INSIZE 2167-25 is an electronic snap gage designed for precise external dimensional measurements. It features a digital display for clear readings and a spring-loaded mechanism for consistent contact pressure.
Figure 1: The INSIZE 2167-25 Electronic Snap Gage. This image displays the full device, highlighting its C-shaped frame, the measuring anvils, the digital display, and control buttons for power, unit conversion, and zero setting.
الميزات الرئيسية
- نطاق القياس: 0-1 بوصة / 0-25 مم
- دقة: 0.0005 بوصة / 0.01 مم
- دقة: +/- 0.0005 inch / +/- 0.012mm
- الآلية: Spring snap for consistent measuring force.
- عرض رقمي: Clear electronic readout for easy interpretation.
- تحويل الوحدة: Switch between inches and millimeters.
- الإعداد الصفري: Ability to set zero at any point.
يثبت
- فك التعبئة: Carefully remove the snap gage from its packaging. Inspect for any visible damage.
- تركيب البطارية: The device typically comes with a battery installed or requires one. If not installed, locate the battery compartment (usually on the back or side of the display unit), open it, and insert the correct battery type (e.g., CR2032) with the correct polarity.
- تنظيف: Before first use, gently wipe the measuring anvils with a clean, lint-free cloth. Ensure no dust or debris is present on the measuring surfaces.
- الظروف البيئية: Operate the snap gage in a stable environment, avoiding extreme temperatures, humidity, or direct sunlight, which can affect accuracy.
تعليمات التشغيل
- تشغيل الطاقة: اضغط على ON button to turn on the device. The display will illuminate and show a reading.
- اختيار الوحدة: اضغط على بوصة/مم button to switch between inch and millimeter units as required. The selected unit will be indicated on the display.
- الإعداد الصفري:
- Ensure the measuring anvils are clean and free of debris.
- Gently close the anvils until they make contact.
- اضغط على صفر button. The display should now read 0.000 (or 0.00 in mm). If it does not, repeat the process.
- أخذ القياس:
- Open the measuring anvils wider than the object to be measured.
- Position the object between the anvils.
- Release the anvils gently so they make firm contact with the object. The spring mechanism ensures consistent measuring force.
- Read the measurement directly from the digital display.
- إيقاف التشغيل: اضغط على عن button to turn off the device when not in use to conserve battery life. The device may also have an auto-off feature.
صيانة
- تنظيف: Regularly clean the measuring surfaces and the body of the snap gage with a soft, lint-free cloth. For stubborn dirt, a small amount of isopropyl alcohol can be used, applied to the cloth, not directly to the device.
- تخزين: Store the snap gage in its protective case (if provided) in a dry, clean environment away from direct sunlight, extreme temperatures, and corrosive substances.
- استبدال البطارية: When the display becomes dim or erratic, replace the battery promptly. Refer to the "Setup" section for battery installation instructions.
- معايرة: بالنسبة للتطبيقات الحساسة، يوصى بإجراء معايرة دورية بواسطة فني مؤهل لضمان استمرار الدقة.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| العرض فارغ أو خافت. | انخفاض مستوى شحن البطارية أو نفادها؛ تركيب البطارية بشكل غير صحيح. | Replace the battery; ensure correct polarity. |
| قراءات غير دقيقة. | Dirty measuring surfaces; improper zero setting; environmental factors. | Clean anvils thoroughly; re-zero the device; ensure stable operating conditions. |
| الأزرار لا تستجيب. | انخفاض مستوى البطارية؛ عطل داخلي. | استبدل البطارية. إذا استمرت المشكلة، فاتصل بخدمة العملاء. |
تحديد
- رقم الموديل: 2167-25
- ماركة: في الحجم
- نطاق القياس: 0-1 بوصة / 0-25 مم
- دقة: 0.0005 بوصة / 0.01 مم
- دقة: +/- 0.0005 inch / +/- 0.012mm
- أبعاد المنتج: Refer to package dimensions for shipping (7.68 L x 1.69 H x 4.61 W inches).
- أول تاريخ متاح: 4 يونيو 2016
الضمان والدعم
Information regarding specific warranty terms for the INSIZE 2167-25 Electronic Snap Gage is not provided in this document. For warranty details, technical support, or service inquiries, please refer to the official INSIZE website or contact your authorized INSIZE dealer. Keep your purchase receipt as proof of purchase.