INSIZE 1156-300 Electronic Height Gage User Manual

1. المقدمة وما فوقview

The INSIZE 1156-300 is an electronic height gage designed for precise vertical measurements. It features a driving wheel for smooth movement and a digital display for clear readings. This instrument is capable of measuring in both inches (0-12") and millimeters (0-300mm) with high resolution. It is constructed from stainless steel for durability and includes a carbide-tipped scriber for marking.

Figure 1: The INSIZE 1156-300 Electronic Height Gage, showing its digital display, driving wheel, and carbide-tipped scriber.

2. مواصفات المنتج

• دقة: 0.0005" / 0.01mm for precise measurements.
• إيقاف التشغيل التلقائي: Conserves battery life; unit powers on by moving the digital unit.
• بناء: Made of durable stainless steel.
• أزرار التحكم: Includes ON/OFF, ZERO, INCH/MM, PRE-SET (+, -), and HOLD functions.
• Scriber: Equipped with a carbide-tipped scriber for accurate marking.
• مصدر الطاقة: يستخدم بطارية CR2032.
• إخراج البيانات: Features data output capability.
• الملحقات الاختيارية: Compatible with data output cables (part no. 7302-SPC5A, 7305-SPC2A), dial test indicator holder (part no. 6293-7), and clamp for protractors (part no. 2372-CLAMP).

3. ماذا يوجد في الصندوق

عند تفريغ الأغراض، تأكد من وجود جميع العناصر وعدم تعرضها للتلف:

• INSIZE 1156-300 Electronic Height Gage
• Carbide-tipped Scriber
• غطاء الغبار
• CR2032 Battery (may be pre-installed or separate)

4. الإعداد

1. فك التعبئة: Carefully remove the height gage and all accessories from its packaging. Retain packaging for future storage or transport.
2. تركيب البطارية: If the battery is not pre-installed, open the battery compartment (typically on the back of the digital unit) and insert one CR2032 battery with the positive (+) side facing up. Close the compartment securely.
3. Scriber Attachment: Loosen the scriber clamp screw on the digital unit. Insert the carbide-tipped scriber into the clamp, ensuring it is securely seated and aligned. Tighten the clamp المسمار بحزم.
4. الموقع: Place the height gage on a stable, flat, and clean surface, such as a surface plate, to ensure accurate measurements.
5. غطاء الغبار: Keep the dust cover on the height gage when not in use to protect it from dust and debris.

5. تعليمات التشغيل

Follow these steps for accurate measurement using your INSIZE 1156-300 Electronic Height Gage:

1. تشغيل الطاقة: اضغط على تشغيل/إيقاف button or simply move the digital unit along the column to activate the display.
2. Unit Selection (Inch/mm): اضغط على INCH/MM button to switch between imperial (inches) and metric (millimeters) units. The selected unit will be indicated on the display.
3. الإعداد الصفري:
   • Place the height gage on the reference surface.
   • Lower the scriber until its tip gently touches the reference surface.
   • اضغط على صفر button to set the current position as zero. The display will show "0.0000" or "0.00".
4. قياس:
   • Use the driving wheel to smoothly move the digital unit and scriber to the desired measurement point.
   • Ensure the scriber makes firm, consistent contact with the workpiece.
   • Read the measurement directly from the digital display.
5. Pre-set Function:
   • ال PRE-SET (+, -) buttons allow you to input a specific value to the display. This is useful for setting a known reference point other than zero.
   • Consult the full product manual for detailed instructions on using the pre-set function for specific applications.
6. وظيفة الانتظار: اضغط على يمسك button to freeze the current reading on the display. Press it again to release and resume live measurement.
7. إيقاف التشغيل: اضغط مع الاستمرار على تشغيل/إيقاف button for a few seconds, or the unit will automatically power off after a period of inactivity.

6. الصيانة

• تنظيف: Regularly clean the height gage, especially the measuring surfaces and the digital unit, with a soft, lint-free cloth. For stubborn dirt, a mild, non-abrasive cleaning solution can be used, applied sparingly to the cloth, not directly to the instrument.
• تخزين: Store the height gage in its original packaging or a protective case when not in use. Ensure it is kept in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances. Always use the provided dust cover.
• استبدال البطارية: When the display becomes dim or erratic, replace the CR2032 battery. Ensure proper polarity during installation. Dispose of old batteries responsibly.
• Scriber Condition: Periodically inspect the carbide-tipped scriber for wear or damage. A worn scriber can affect measurement accuracy. Replace if necessary.
• معايرة: بالنسبة للتطبيقات الحساسة، يوصى بإجراء معايرة دورية بواسطة فني مؤهل لضمان استمرار الدقة.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your INSIZE 1156-300 Height Gage, refer to the following common problems and solutions:

• العرض فارغ أو باهت:
  • Check if the unit is powered on by pressing the ON/OFF button or moving the digital unit.
  • Replace the CR2032 battery. Ensure it is inserted with correct polarity.
• قراءات غير دقيقة أو غير متسقة:
  • Ensure the reference surface is clean, flat, and stable.
  • Re-zero the instrument on the reference surface.
  • Check if the scriber is securely attached and not worn.
  • Clean the measuring surfaces and the digital unit to remove any debris.
  • Ensure the workpiece is stable and properly positioned.
• Digital unit movement is stiff or rough:
  • Clean the column and the sliding surfaces of the digital unit.
  • Apply a very small amount of light machine oil to the column if recommended by the manufacturer (refer to specific product documentation if available).

If the problem persists, contact INSIZE customer support or your local distributor for assistance.

8. المواصفات

9. الضمان والدعم

For information regarding warranty coverage, technical support, or replacement parts for your INSIZE 1156-300 Electronic Height Gage, please refer to the warranty card included with your product or visit the official INSIZE website. You may also contact your authorized INSIZE dealer or distributor for assistance.

INSIZE Official Webموقع: www.insize.com