CHANZON 1DGL-JC-20W-NW
CHANZON High Power LED Chip 20W Natural White (4000K-4500K) Instruction Manual
مقدمة
This manual provides essential information for the proper installation, operation, and maintenance of your CHANZON High Power LED Chip 20W Natural White. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Image: CHANZON 20W Natural White LED Chip, showcasinتصميمها المدمج.
مواصفات المنتج
| مواصفة | قيمة |
|---|---|
| ماركة | تشانزون |
| رقم الموديل | 1DGL-JC-20W-NW |
| قوة | 20 واط (الحد الأقصى) |
| انبعاث اللون | الأبيض الطبيعي |
| درجة حرارة اللون | 4000 كلفن-4500 كلفن |
| التيار الموصى به | 600 مللي أمبير |
| إلى الأمام المجلدtage | 30-34 فولت |
| التدفق الضوئي | 1600-1800LM |
| Emitting Angle | 120-140 درجة |
| نوع الشريحة | Integrated COB LED Panel, 30mil chips |
| مادة الأسلاك | Double Golden Wire (99.99%) |
| مادة الإطار | Copper Frame |
| عمر | 50,000 Hours (with proper heat management) |
| أبعاد المنتج | 6.69 × 5.12 × 0.39 بوصة |
| وزن العنصر | 0.352 أونصات |
The CHANZON LED chip features a high-quality COB LED panel with high brightness, double golden wire, and a copper frame for enhanced performance and durability.
Image: Internal construction of the CHANZON LED chip, highlighting the 100% copper holder and 2 gold wires for improved conductivity and heat dissipation.
الإعداد والتثبيت
- اختيار مصدر الطاقة: Use a constant current LED driver that matches the recommended current (600mA) and forward voltage (30-34V) for this 20W LED chip. Incorrect power supply can damage the LED.
- Heat Sink System: A heat sink system is mandatory for proper operation and to achieve the stated lifespan. The working temperature of the LED chip should not exceed 60°C (140°F). Ensure the LED chip is securely mounted to an adequate heat sink.
- Polarity Connection: Carefully observe the positive (anode +) and negative (cathode -) markings on the LED chip. Connect the LED driver output to the corresponding terminals on the LED chip. Incorrect polarity will prevent the LED from lighting up and may cause damage.
- التثبيت الآمن: Mount the LED chip firmly to the fixture or application using appropriate fasteners. Ensure good thermal contact between the LED chip's base and the heat sink.
For compatible constant current LED drivers, search for "Chanzon 600mA Constant Current LED Driver" on Amazon (e.g., B01N374QMQ for plastic case, B01MSANK1C for aluminum case waterproof, B01N6U68LI for PCB board only).
Image: CHANZON LED chip showing the anode (+) and cathode (-) markings for correct electrical connection.
تعليمات التشغيل
Once properly installed with a suitable constant current LED driver and heat sink, the CHANZON High Power LED Chip will illuminate when power is supplied. The chip is designed for continuous operation within its specified parameters.
- تشغيل الطاقة: Apply power from the constant current LED driver to the connected LED chip.
- Observe Light Output: The LED chip should emit natural white light (4000K-4500K).
- تجنب التعرض المباشر للعين: Do not look directly into the illuminated LED chip for extended periods, as the high intensity light can cause eye strain or damage.
Image: An illuminated CHANZON 20W Natural White LED chip connected to power, demonstrating its light output.
صيانة
The CHANZON High Power LED Chip is designed for long-term, low-maintenance operation. However, adherence to the following guidelines will help ensure its maximum lifespan:
- إدارة الحرارة: Regularly check that the heat sink is free from dust and debris to ensure efficient heat dissipation. Overheating is the primary cause of premature LED failure.
- نظافة: Keep the surface of the LED chip clean. Dust or dirt on the emitting surface can reduce light output and affect thermal performance. Use a soft, dry cloth for cleaning.
- الظروف البيئية: Operate the LED chip within its specified environmental conditions (temperature, humidity).
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| LED لا يضيء | Incorrect polarity; Faulty power supply; Loose connection; Damaged LED chip. | Verify polarity (+/-); Check power supply output; Secure all connections; Replace LED chip if damaged. |
| ضوء LED خافت أو يومض | Insufficient current/voltage from driver; Overheating; Poor connection. | Ensure driver matches LED specifications; Improve heat sink contact/airflow; Check connections. |
| LED overheats rapidly | Inadequate heat sink; Poor thermal paste application; Excessive current. | Install larger/more efficient heat sink; Reapply thermal paste; Verify current from driver is within specifications (600mA). |
| عمر قصير | Consistent overheating; Over-current/over-voltage; Poor quality power supply. | Ensure proper heat management (below 60°C); Use a stable constant current driver within specified voltage/current ranges. |
التطبيقات
The CHANZON High Power LED Chip is versatile and suitable for various lighting applications, including:
- لمبات الإضاءة LED
- Cast Lights
- الاضواء الكاشفة
- Stagه الأضواء
- تحت الماء Lamps
- الإسقاط Lamps
- أضواء تنمو النبات
- علاج الأشعة فوق البنفسجية L.amps (specific variants)
- Mining Lamps
- DIY Lighting Projects
Image: A table detailing various color options and their corresponding specifications for CHANZON LED chips, including warm white, natural white, red, blue, green, yellow, UV, and IR.
فيديوهات المنتج
Review of LED Chip 20W from Chanzon
فيديو: تقرير مفصلview of the CHANZON 20W LED chip, demonstrating its features, construction, and various color options. This video highlights the quality and versatility of the product.
Chanzon LED Chip 20W Bulb Lamp Beads DIY Lighting
Video: This video showcases the CHANZON 20W LED chip in action, demonstrating its brightness and suitability for DIY lighting projects. It provides a visual representation of the chip's performance.
الضمان والدعم
Specific warranty information for this product is not provided in the available data. For warranty details, technical support, or further inquiries, please contact CHANZON directly through their official channels or the retailer where the product was purchased.
يمكنك زيارة CHANZON Store on Amazon لمزيد من المعلومات.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.