Cree Lighting Connected LED Smart Bulb User Manual

مقدمة

The Cree Connected LED bulb is designed to provide an easy-to-use and cost-effective solution for customizing lighting in your home. This smart bulb can be controlled from anywhere, offering convenience and flexibility. It integrates with compatible home automation systems, allowing you to manage your lighting settings via an app on your iOS or Android device.

The Cree Connected LED bulb offers convenient control from anywhere, enhancing your home lighting experience.

معلومات السلامة

يرجى قراءة وفهم جميع تعليمات السلامة قبل تركيب هذا المنتج أو استخدامه. قد يؤدي عدم اتباع هذه التعليمات إلى صدمة كهربائية أو حريق أو مخاطر أخرى.

• للاستخدام الداخلي فقط: صُممت هذه اللمبة للاستخدام الداخلي في الأماكن الجافة. لا تستخدمها في الأماكن الرطبة أو الجافة.amp البيئات.
• Not for Enclosed Fixtures: Do not use this bulb in fully enclosed luminaires or fixtures, as this can trap heat and shorten the bulb's lifespan.
• عكس الضوء LED: This bulb is dimmable, but it is not recommended for use with traditional wall dimmers. Control dimming via a compatible smart hub and app.
• إيقاف التشغيل قبل التثبيت: Always turn off the power to the fixture at the circuit breaker before installing or removing the bulb.
• المجلدtagالتوافق ه: تأكد من حجم الجهازtage (120 Volts) matches the bulb's requirements.
• التعامل معها بحذر: Avoid dropping the bulb or subjecting it to excessive force.

محتويات الحزمة

The package for your Cree Connected LED Smart Bulb typically includes:

• 1 x Cree Connected LED Smart Bulb

The product packaging for the Cree Connected LED Smart Bulb.

يثبت

To set up your Cree Connected LED Smart Bulb, you will need a compatible ZigBee certified hub (e.g., Wink, SmartThings, WeMo, or Alexa devices with built-in ZigBee hub like Echo Plus, Echo Studio, Echo Show 2nd Gen).

1. تثبيت اللمبة: Screw the Cree Connected LED bulb into a standard E26 light socket. Ensure the power to the fixture is off before installation.
2. Prepare Your Hub: Place your compatible ZigBee hub into device discovery mode. Refer to your hub's specific instructions for this step. It is often recommended to initiate discovery mode on the hub قبل turning on the bulb.
3. Power On the Bulb: Turn on the power to the light fixture. The bulb should light up. Your hub should detect and pair with the bulb automatically. A successful pairing is often indicated by the bulb blinking twice.
4. Download and Launch App: Download the applicable app for your chosen hub (e.g., Wink app, SmartThings app, Alexa app) on your iOS or Android device. Launch the app and follow the on-screen instructions to add and configure your new bulb.
5. قم بتسمية المصباح الخاص بك: Once paired, you can name your bulb within the app for easy identification and control (e.g., "Living Room Lamp," "Kitchen Light").

Resetting the Bulb to Factory Defaults

If you experience difficulty pairing the bulb or need to reset it, follow this sequence:

• 1. Turn the bulb عن لمدة 2 ثواني.
• 2. Turn the bulb ON لمدة ثانية واحدة.
• 3. Turn the bulb عن لمدة 2 ثواني.
• 4. Turn the bulb ON لمدة ثانية واحدة.
• 5. Turn the bulb عن لمدة 2 ثواني.
• 6. Turn the bulb ON لمدة ثانية واحدة.
• 7. Turn the bulb عن لمدة 2 ثواني.
• 8. Turn the bulb ON.

After the fourth ON cycle, the light will blink twice, indicating a successful reset. You can then attempt to pair the bulb again.

Cree Lighting offers a variety of smart lighting solutions.

تعليمات التشغيل

Once your Cree Connected LED Smart Bulb is successfully paired with your hub, you can control it using the associated mobile application or voice commands through compatible smart assistants.

• التحكم في التشغيل/الإيقاف: Use the app to turn the bulb on or off instantly.
• يعتم: Adjust the brightness of the bulb to your desired level using the dimming controls within the app. The bulb offers a full range of dimming.
• الجدولة: Set schedules for your lights to turn on or off automatically at specific times, or to simulate occupancy when you are away from home.
• التجميع: Group multiple Cree Connected bulbs together to control them simultaneously as a single unit.
• التحكم الصوتي: If connected to a voice assistant (e.g., Alexa), use voice commands to control your lights (e.g., "Alexa, turn on Living Room Light," "Alexa, dim Kitchen to 50%").

Control your smart bulbs easily through the mobile application.

Control your lights remotely for convenience and security.

صيانة

The Cree Connected LED Smart Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• تنظيف: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• تخزين: إذا كنت ستخزن المصباح لفترة طويلة، فاحتفظ به في عبوته الأصلية أو في وعاء واقٍ في مكان بارد وجاف.
• تجنب ارتفاع درجة الحرارة: Do not install the bulb in enclosed fixtures or areas with poor ventilation, as this can lead to overheating and reduce its lifespan.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your Cree Connected LED Smart Bulb, refer to the following common problems and solutions:

تحديد

Dimensions of the Cree Connected LED Smart Bulb.

الضمان والدعم

ضمان: The Cree Connected LED Smart Bulb comes with a 3-year limited warranty. Please refer to the product packaging for complete details regarding warranty coverage and terms.

يدعم: For additional support, frequently asked questions, or to access the latest user guides and installation manuals, please visit the official Cree Lighting website. You may also find helpful resources in the PDF documents provided by the manufacturer:

• دليل التثبيت (PDF)
• دليل المستخدم (PDF)
• دليل المستخدم (PDF)