Panasonic Smart Home Human Motion Sensor KX-HJS200-W User Manual

1. المقدمة

The Panasonic Smart Home Human Motion Sensor KX-HJS200-W is a component of the Panasonic Smart Home System, designed to enhance home security and monitoring. This sensor detects movement by identifying changes in infrared radiation emitted by objects with temperature, such as people or animals. When motion is detected, the sensor can send notifications to your smartphone via the dedicated 'Home Network' application, provided it is connected to a home unit and your wireless LAN environment.

This manual provides essential information for the proper setup, operation, and maintenance of your KX-HJS200-W Human Motion Sensor.

الشكل 1: الجبهة view of the Panasonic KX-HJS200-W Human Motion Sensor, showing the motion detection lens and indicator light.

2. محتويات العبوة

تأكد من وجود كافة العناصر في العبوة قبل المتابعة بالتثبيت.

• Panasonic KX-HJS200-W Human Motion Sensor
• محول التثبيت على الحائط
• بطاريات قلوية AAA (عدد 2)
• Mounting Screws (4mm x 25mm) (x2)

Figure 2: Package contents including the human motion sensor, wall mount adapter, batteries, and screws.

3. الإعداد

3.1 متطلبات النظام

• A Panasonic Smart Home System Home Unit (sold separately) connected to your home's wireless LAN.
• A smartphone or tablet running Android™ 5.0 or later (supporting Google Play™) or iOS 9.0 or later (iPhone, iPad).
• The dedicated 'Home Network' application installed on your smartphone/tablet (available on Google Play and App Store).
• A Wi-Fi environment.
• An internet connection environment with a global IP address [IPv4].
• A wireless router supporting UPnP function [2.4 GHz] frequency band.

3.2 تركيب البطارية

1. Remove the back cover of the sensor.
2. Insert two AAA alkaline batteries, ensuring correct polarity.
3. أعد تركيب الغطاء الخلفي بشكل آمن.

Figure 3: Battery compartment with two AAA batteries installed.

3.3 Pairing with Home Unit

Follow the instructions provided with your Panasonic Smart Home System Home Unit and the 'Home Network' application to pair the KX-HJS200-W sensor. Up to 50 sensors (including door/window sensors) can be registered to a single home unit.

3.4 تركيب جهاز الاستشعار

The sensor can be wall-mounted using the included wall mount adapter and screws. Choose a location where the sensor has an unobstructed view of the area you wish to monitor. Avoid direct sunlight or heat sources that may cause false detections.

4. تشغيل المستشعر

4.1 تعديل الحساسية

The sensor features a sensitivity switch on its side, allowing you to adjust its detection range. Set it to 'High Sensitivity' for broader detection or 'Low Sensitivity' to reduce false alarms in busy areas.

الشكل 4: الجانب view of the sensor with the sensitivity switch labeled "High Sensitivity" and "Low Sensitivity".

4.2 استلام الإشعارات

Once paired and configured through the 'Home Network' app, the sensor will send notifications to your smartphone when motion is detected. Notifications can be configured to activate during 'Home' or 'Away' security modes. When connecting from outside your home, standard smartphone data charges may apply.

The system can also be configured to record approximately 30 seconds of video from a connected camera when the motion sensor is triggered.

الشكل 5: مثالamples of sensor applications, including monitoring for intruders, store visitors, and family members.

5. الصيانة

5.1 التنظيف

Wipe the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the device.

5.2 استبدال البطارية

When the battery level is low, the sensor will indicate this, and the 'Home Network' app will notify you. Replace both AAA alkaline batteries promptly to ensure continuous operation. Refer to section 3.2 for battery installation instructions.

6. استكشاف الأخطاء وإصلاحها

• لا يوجد إشعارات:
  • Check if the sensor is properly paired with the home unit.
  • Ensure the 'Home Network' app is installed and configured correctly on your smartphone.
  • تأكد من أن هاتفك الذكي متصل بالإنترنت بشكل فعال.
  • تحقق من مستوى شحن بطارية المستشعر.
  • Confirm that the security mode (Home/Away) is set to allow notifications.
• الإنذارات الكاذبة:
  • Adjust the sensitivity switch to 'Low Sensitivity'.
  • Relocate the sensor away from direct sunlight, heating vents, or areas with frequent temperature fluctuations.
  • Ensure the sensor is not pointing at moving objects like curtains or pets.
• Sensor Not Detecting Movement:
  • تحقق من مستوى شحن بطارية المستشعر.
  • تأكد من أن المستشعر view لا يتم إعاقة.
  • Adjust the sensitivity switch to 'High Sensitivity'.
  • Verify the sensor is within range of the home unit.
• مشكلات اتصال التطبيق:
  • Ensure your home unit is connected to the internet via a 2.4 GHz wireless router with UPnP enabled and a global IPv4 address.
  • Check for updates to your smartphone's OS and the 'Home Network' application.

7. المواصفات

8. الضمان والدعم

For product repair inquiries or technical support, please contact the Panasonic Repair Consultation Desk:

• الهاتف: 0120-878-554
• ساعات الاستقبال: 9:00 - 19:00 (Daily)
• Special Hours: 9:00 - 17:30 (أيام الأحد، العطلات الرسمية، عطلات نهاية العام/رأس السنة الجديدة)
• متصل: بحث عن "إصلاح أجهزة باناسونيك" على الإنترنت.

For frequently asked questions and additional information regarding the Smart Home System, please visit the Panasonic FAQ page:

Panasonic Smart Home System FAQ