M-Wave Lock 'N' Roll Alarm Lock Instruction Manual

مقدمة

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your M-Wave Lock 'N' Roll Alarm Lock. Please read this manual carefully before using the product to ensure proper function and safety.

The M-Wave Lock 'N' Roll Alarm Lock is designed to provide enhanced security for your bicycle or other valuable items. It features a 600 x 2mm cable, a 4-digit customizable combination, and an integrated alarm system that activates upon movement or cable cutting. The alarm sensitivity is adjustable, and the unit is powered by included batteries.

المنتج انتهىview

Familiarize yourself with the components of your M-Wave Lock 'N' Roll Alarm Lock.

Key features include a built-in 90dB alarm, motion and cut detection, adjustable sensitivity, and a personal PIN code. The device is compact and lightweight, making it easy to transport.

يثبت

1. تركيب البطارية

The M-Wave Lock 'N' Roll Alarm Lock requires 1 CR123A battery, which is included. To install or replace the battery:

1. Locate the battery compartment on the back of the lock.
2. افتح غطاء الحجرة.
3. Insert the CR123A battery, ensuring correct polarity (+/-).
4. أغلق غطاء حجرة البطارية جيدًا.

2. ضبط الرقم السري

The lock comes with a default combination (usually 0000). You can set your personal 4-digit combination from 10,000 possibilities.

1. Ensure the lock is in the "OPEN" position by aligning the current combination (default 0000) with the indicator marks.
2. Locate the "SET" button, usually on the side or back of the lock.
3. Press and hold the "SET" button. While holding it, rotate the dials to your desired 4-digit combination.
4. Release the "SET" button. Your new combination is now set.
5. مهم: Write down your new combination and store it in a safe place. There is no master key or way to reset the combination if forgotten without knowing the current one.

تعليمات التشغيل

1. قفل الجهاز

1. Align your set 4-digit combination to unlock the device.
2. Press the release button to extend the cable head.
3. Thread the cable through the item you wish to secure (e.g., bicycle frame, helmet, bag).
4. Insert the cable head into the locking port on the main unit until you hear a click.
5. قم بخلط أرقام القفل لتأمين القفل.
6. The alarm will arm automatically after a few seconds, indicated by a beep.

2. فتح الجهاز

1. Align your personal 4-digit combination with the indicator marks.
2. The lock will disarm and unlock.
3. Press the release button to remove the cable head from the locking port.

3. وظيفة التنبيه

The alarm is designed to deter theft by sounding a loud 90-decibel alert if the lock is moved or the cable is cut.

• كشف الحركة: If the lock detects significant movement after being armed, it will emit a warning beep. Continued movement will trigger the full 90dB alarm.
• Cable Cut Detection: If the cable is severed, the alarm will immediately sound.
• حساسية قابلة للتعديل: The lock features adjustable sensitivity to help prevent accidental alarms. Refer to the "Maintenance" section for details on adjusting sensitivity.

صيانة

1. استبدال البطارية

When the alarm sound becomes weak or the lock fails to arm, it's time to replace the battery. Follow the steps outlined in the "Battery Installation" section under "Setup".

2. التنظيف

Wipe the lock with a soft, damp قطعة قماش. لا تستخدم المنظفات الكاشطة أو المذيبات، لأنها قد تتلف الطلاء أو المكونات الداخلية.

3. Adjusting Alarm Sensitivity

The M-Wave Lock 'N' Roll Alarm Lock allows for adjustment of its motion sensor sensitivity. This can help reduce false alarms in windy conditions or busy environments.

(Note: Specific instructions for adjusting sensitivity are typically found on the product packaging or a small insert. As this information is not detailed in the provided data, general guidance is given. Users should refer to the physical product's included instructions for precise steps.)

استكشاف الأخطاء وإصلاحها

تحديد

• نموذج: M-Wave Lock 'N' Roll Alarm Lock (Model Number: 230054)
• طول الكابل: Approximately 600 mm (60 cm) / 2mm diameter
• مستوى صوت الإنذار: 90 ديسيبل
• مزيج: 4-digit resettable combination (10,000 possibilities)
• مصدر الطاقة: 1 x CR123A battery (included)
• أبعاد المنتج: 10 × 19.5 × 2.5 سم
• وزن السلعة: 120 جرام
• لون: Light Grey (housing)
• المميزات الخاصة: Alarm, Adjustable Sensitivity, Motion and Cable Cut Detection

الضمان والدعم

For warranty information and customer support, please contact M-Wave directly or refer to the official M-Wave webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.

الشركة المصنعة: Cycle Force Group, LLC.

تاريخ التوفر الأول: 22 ديسمبر 2015

For additional resources and product information, visit the official M-Wave webموقع: www.m-wave-bike.com