Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) Instruction Manual

مقدمة

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.

محتويات الحزمة:

• Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
• مجموعة أدوات التثبيت (مسامير متنوعة، مثبتات، غسالات)
• High Speed HDMI Cable (1080p 1.4v)
• 6-inch Tri-axis Spirit Level
• دليل التعليمات

الشكل 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.

معلومات هامة حول السلامة

WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
• استخدم دائمًا جهاز كشف العوارض الخشبية لتحديد مواقع العوارض الخشبية أو للتأكد من أنك تقوم بالتركيب في الخرسانة/الطوب الصلب.
• Do not exceed the maximum load capacity of 36.2kg (80lbs).
• تم تصميم هذا المنتج للاستخدام الداخلي فقط.
• Ensure all screws are securely tightened, but do not overtighten.
• احتفظ بالأطفال والحيوانات الأليفة بعيدًا أثناء التثبيت.
• إذا لم تكن متأكدًا من أي جزء من عملية التثبيت، فاستشر متخصصًا مؤهلًا.

تحديد

الشكل 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).

الإعداد والتثبيت

1. قائمة مراجعة ما قبل التثبيت

• Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
• نوع الجدار: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
• الأدوات المطلوبة: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
• Weight Check: Ensure your TV's weight does not exceed 36.2kg (80lbs).

الشكل 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.

2. Attaching the TV Brackets to Your Television

1. ضع التلفاز بعناية على سطح ناعم ونظيف بحيث يكون وجهه لأسفل لمنع تلف الشاشة.
2. Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
3. Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.

3. Mounting the Wall Plate to the Wall

1. Determine Mounting Height: Decide on the desired height for the top of your TV. Mark this on the wall.
2. تحديد مواقع الدعامات (للجدران الخشبية): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
3. موضع لوحة الحائط: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
4. حفر ثقوب تجريبية:
   • For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
   • For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
5. لوحة تثبيت جدارية آمنة: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.

4. Hanging the Television

1. بمساعدة شخص آخر، ارفع التلفزيون بحرص باستخدام الأقواس المرفقة.
2. ثبّت حاملات التلفزيون على لوحة الحائط. تأكد من تثبيت التلفزيون بإحكام على لوحة الحائط.
3. Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.

تعليمات التشغيل

The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

الشكل 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewing angles from various positions in a room.

مفصل دوار قابل للتعديل

Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.

ضبط الميل

To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.

إدارة الكابلات

The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

الشكل 5: مفصل view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.

صيانة

• التفتيش الدوري: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
• تنظيف: نظّف الحامل بقطعة قماش ناعمة وجافة. تجنّب استخدام المنظفات الكاشطة أو المذيبات التي قد تُتلف الطلاء.
• تشحيم: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
• الوزن المحدد: Never exceed the maximum weight capacity of 36.2kg (80lbs).

استكشاف الأخطاء وإصلاحها

معلومات الضمان

The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a ضمان المنتج لمدة عامين. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For warranty claims or further details, please contact Invision customer support.

دعم العملاء

If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.

الشركة المصنعة: Invision Technology (UK) Ltd

رقم تعريف التجارة العالمية (GTIN): 05060264551392

Please refer to the product packaging or the official Invision webالموقع للحصول على أحدث معلومات الاتصال.

الشكل 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.