Powerplus POWX1175 1600W 5J SDS Plus Rotary Hammer Drill Instruction Manual

مقدمة

This manual provides essential information for the safe and efficient operation of your Powerplus POWX1175 1600W 5J SDS Plus Rotary Hammer Drill. Please read these instructions carefully before using the tool to ensure proper handling, maximize performance, and prevent injury. Keep this manual for future reference.

Figure 1: Powerplus POWX1175 Rotary Hammer Drill highlighting its 4-in-1 functions (drilling, hammer drilling, chiseling, chisel rotation) and SDS plus chuck system.

معلومات السلامة

اتبع دائمًا احتياطات السلامة الأساسية عند استخدام الأدوات الكهربائية لتقليل خطر الحريق والصدمة الكهربائية والإصابات الشخصية.

• ارتداء معدات الحماية الشخصية المناسبة: Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for better grip and vibration reduction.
• Ensure a safe work area: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Avoid hazardous environments: Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• تأمين الشغل: Always clamp or secure the material you are working on. Holding it by hand is unstable and can lead to loss of control.
• الحفاظ على التوازن والوضع الصحيح: Do not overreach. Maintain proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• افصل الطاقة: Always disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool.
• استخدم الأداة الصحيحة لهذه المهمة: Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it was designed.
• Inspect the tool before use: Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool repaired before use.
• ابق الأطفال والمارة بعيدا: Distractions can cause you to lose control.

المنتج انتهىview

The Powerplus POWX1175 is a versatile 1600W rotary hammer drill designed for heavy-duty applications. It features four operational modes: drilling, hammer drilling, chiseling, and chisel rotation, making it suitable for various materials including wood, steel, and concrete.

الشكل 2: الجانب view of the Powerplus POWX1175 Rotary Hammer Drill, showing the main handle, auxiliary handle, and mode selector.

المكونات الرئيسية:

• نظام SDS Plus Chuck: For quick and secure bit changes.
• تبديل محدد الوضع: Allows selection between drilling, hammer drilling, chiseling, and chisel rotation.
• مقبض مساعد: Provides additional grip and control, adjustable for user comfort.
• توقف العمق: For precise control over drilling depth.
• سلك الطاقة: Corded electric operation for consistent power.

يثبت

1. تركيب المقبض المساعد:

The auxiliary handle provides enhanced control and stability. Loosen the handle clamp, slide the handle onto the tool's neck, and adjust it to a comfortable position. Tighten the clamp بشكل آمن قبل العملية.

2. Installing SDS Plus Bits:

1. نظف ساق رأس مفك البراغي SDS Plus.
2. Pull back the chuck collar and insert the bit into the chuck.
3. قم بتدوير القطعة قليلاً حتى تتعشق مع آلية القفل.
4. Release the chuck collar. The bit should be held firmly but have a slight axial play, which is normal for SDS Plus systems.
5. Pull the bit to ensure it is securely locked.

3. Setting the Depth Stop:

Insert the depth stop rod into its designated hole on the auxiliary handle. Adjust the rod to the desired drilling depth by measuring from the tip of the drill bit. Secure the depth stop by tightening its locking screw.

Figure 3: The depth stop feature in use, allowing for precise control over drilling depth to prevent over-drilling.

تعليمات التشغيل

1. Selecting the Operating Mode:

The POWX1175 offers four modes, selected via the mode selector switch:

• Drilling (Rotation Only): For drilling in wood, metal, and plastics.
• Hammer Drilling (Rotation with Impact): For drilling in concrete, masonry, and stone.
• Chiseling (Impact Only): For light demolition work, removing tiles, or channeling.
• Chisel Rotation: Allows the chisel to be rotated and locked into various positions for optimal working angles.

Figure 4: The drill's capabilities for various materials: Wood (up to 40mm), Steel (up to 13mm), and Concrete (up to 32mm).

2. التشغيل العام:

1. Connect the tool to a suitable power supply (220V).
2. Hold the tool firmly with both hands, using the main and auxiliary handles.
3. Position the bit on the desired work point.
4. Press the trigger switch to start the tool. Apply steady, even pressure. Do not force the tool; let the hammer action do the work.
5. For chiseling, ensure the chisel is correctly oriented using the chisel rotation function before engaging impact.
6. When finished, release the trigger switch and wait for the bit to stop rotating before setting the tool down.

Figure 5: The Powerplus POWX1175 in operation, demonstrating its powerful 1600W motor and 5J impact energy, capable of up to 3900 impacts per minute.

3. Drilling Capacities:

• Wood: Up to 40 mm
• Steel: Up to 13 mm
• Concrete: Up to 32 mm

صيانة

تضمن الصيانة الدورية طول عمر مثقاب المطرقة الدوارة وأدائه الأمثل.

• تنظيف: After each use, clean the tool with a soft cloth. Remove any dust or debris from ventilation openings. Do not use water or chemical cleaners.
• تشحيم: Periodically apply a small amount of grease to the SDS Plus chuck to ensure smooth bit insertion and removal. The included grease container can be used for this purpose.
• فحص الحبل: Regularly inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it replaced by a qualified technician.
• فرش كاربون: The carbon brushes may need replacement after extended use. This should be performed by a qualified service center.
• تخزين: Store the tool in its original carrying case in a dry, secure place, out of reach of children.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

Information regarding the product warranty and customer support services is typically provided in a separate warranty card or can be found on the official POWERPLUS website. Please refer to these resources for details on warranty coverage, service centers, and contact information for technical assistance.