BLACK+DECKER GPC1820LN 18V 2.0Ah Cordless High Branch Pole Chainsaw Instruction Manual

1. المقدمة

Thank you for choosing the BLACK+DECKER GPC1820LN 18V 2.0Ah Cordless High Branch Pole Chainsaw. This tool is designed for safely and efficiently pruning high branches without the need for a ladder. Its lightweight and cordless design offers convenience and maneuverability for various gardening tasks. Please read this manual thoroughly before operating the tool to ensure safe and effective use.

Image: The BLACK+DECKER GPC1820LN 18V 2.0Ah Cordless High Branch Pole Chainsaw.

2. تعليمات السلامة

احرص دائمًا على إعطاء الأولوية للسلامة عند تشغيل الأدوات الكهربائية. قد يؤدي عدم اتباع هذه التعليمات إلى إصابات خطيرة أو أضرار بالممتلكات.

• معدات الحماية الشخصية: Always wear safety glasses, gloves, and sturdy footwear. A hard hat is recommended for overhead work.
• منطقة العمل: Ensure the work area is clear of bystanders, children, and pets. Maintain a safe distance from power lines and other obstacles.
• استقرار: Always maintain a firm footing and balance. Do not overreach.
• فحص الأدوات: Before each use, inspect the tool for any damage, loose parts, or worn components. Ensure the chain is properly tensioned and lubricated.
• سلامة البطارية: Use only BLACK+DECKER 18V lithium-ion batteries and chargers. Do not expose batteries to water or extreme temperatures.
• تقنية القطع: Be aware of falling branches. Plan your cuts to avoid kickback. Do not cut branches thicker than the maximum recommended capacity.
• تخزين: Store the tool in a dry, secure place out of reach of children. Remove the battery when not in use.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• BLACK+DECKER GPC1820LN Pole Chainsaw Unit
• القطب التمديد
• 18V 2.0Ah Lithium-ion Battery (x1)
• شاحن سريع
• حقيبة التخزين
• نظارات السلامة
• عرافة وجع

Image: Components of the BLACK+DECKER GPC1820LN Pole Chainsaw, including the main unit and extension pole.

4. الإعداد

4.1. شحن البطارية

1. Connect the rapid charger to a suitable power outlet.
2. Insert the 18V lithium-ion battery into the charger.
3. Allow the battery to charge for approximately 60 minutes until the indicator light shows a full charge.
4. أخرج البطارية من الشاحن بمجرد شحنها بالكامل.

4.2. Assembling the Pole Chainsaw

1. Ensure the battery is removed from the tool before assembly.
2. Attach the chainsaw head unit to the main pole. Ensure it clicks securely into place.
3. If extended reach is required, attach the extension pole between the chainsaw head unit and the main pole. Ensure all connections are firm and secure.
4. Using the hex wrench, adjust the chain tension. The chain should be snug but still able to be pulled freely around the bar by hand.
5. Fill the oil reservoir with appropriate chain lubricant (not included). Regularly check the oil level during operation.

Image: The BLACK+DECKER GPC1820LN Pole Chainsaw fully assembled with the extension pole.

5. تعليمات التشغيل

5.1. فحوصات ما قبل التشغيل

• Ensure all safety instructions have been reviewالمحرر
• Confirm the battery is fully charged and securely inserted.
• تحقق من توتر السلسلة والتشحيم.
• افحص منطقة العمل بحثًا عن المخاطر.

5.2. البدء والتوقف

• To start: Press the safety lock-off button and then squeeze the trigger switch.
• للإيقاف: حرر مفتاح الزناد.

5.3. تقنيات القطع

When cutting high branches, position yourself safely away from the falling path of the branch. Use the pole to reach the desired branch. Make a small undercut first on the underside of the branch to prevent splintering, then make the main cut from the top. Avoid cutting branches thicker than 170mm in diameter.

Image: A person operating the pole chainsaw to prune a high tree branch, demonstrating safe reach.

Image: An operator using the pole chainsaw, with an arrow illustrating the upward reach and cutting action on a high branch.

6. الصيانة

تضمن الصيانة المنتظمة الأداء الأمثل وتطيل عمر أداةك.

• شحذ/استبدال السلسلة: A sharp chain is essential for efficient cutting. Sharpen the chain regularly or replace it when dull or damaged. Refer to the chain type 90SG-34 (A6158) for replacement.
• صيانة البار: Clean the guide bar groove and oil holes. Flip the bar periodically to ensure even wear.
• تنظيف: After each use, clean the tool body, chain, and bar. Remove any sawdust or debris.
• العناية بالبطارية: خزّن البطاريات في مكان بارد وجاف. لا تخزّن البطاريات الفارغة تماماً لفترات طويلة.
• تخزين: Store the pole chainsaw in its storage bag in a dry, secure location. Remove the battery before storing.

الصورة: لقطة مقربة view of the chainsaw head, highlighting the chain and guide bar for maintenance reference.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

فترة الضمان: This BLACK+DECKER product is covered by a warranty for 1 year from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical assistance, spare parts, or warranty service, please contact BLACK+DECKER customer support. Refer to the official BLACK+DECKER website or your local dealer for contact information specific to your region.

الموارد المتاحة على الإنترنت: For additional information, product registration, and FAQs, visit the official BLACK+DECKER webموقع: www.blackanddecker.com