Permatex 81160 High-Temp Red RTV Silicone Gasket User Manual

1. انتهى المنتجview

The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65 درجة فهرنهايت إلى 650 درجة فهرنهايت (-54 درجة مئوية إلى 343 درجة مئوية).

It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.

Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.

2. معلومات السلامة

Always read and understand all safety precautions before using this product. Use personal protective equipment as required.

2.1. Precautionary Statements - Prevention

• Contains: Calcium carbonate, Iron oxide.
• احصل على تعليمات خاصة قبل الاستخدام.
• لا تتعامل حتى يتم قراءة جميع احتياطات السلامة وفهمها.
• استخدام معدات الوقاية الشخصية على النحو المطلوب.

2.2. Precautionary Statements - Response

• إذا في العين: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
• إذا كان على الجلد: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.

2.3. Precautionary Statements - Storage

• حماية من أشعة الشمس.
• تخزينها في مكان جيد التهوية.
• المتجر مقفل.
• يحفظ بعيدًا عن متناول الأطفال.

3. الإعداد

3.1. تحضير السطح

For optimal results, ensure that all surfaces where the gasket maker will be applied are نظيف وجاف. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.

4. تعليمات التقديم

1. Prepare Nozzle: قطع الفوهة إلى حجم الخرزة المطلوبة.
2. Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
3. تجميع الأجزاء: Immediately assemble the parts while the silicone is still wet.
4. التشديد الأولي: Finger tighten the assembly until the material begins to squeeze out around the flange.

الصورة 4.1: مثالample of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.

5. Curing and Finishing

5. Initial Dry Time: Allow the gasket maker to dry for ساعة واحدة.
6. الشد النهائي: After the initial dry time, tighten the assembly to the manufacturer's specified torque.
7. وقت العلاج الكامل: يسمح 24 ساعات for the gasket maker to fully cure before filling with fluids or returning the component to service.

6. الصيانة

6.1. تخزين المنتج

بعد كل استخدام، replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.

7. Troubleshooting and Limitations

ملاحظة هامة: هذا المنتج هو NOT recommended for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.

8. مواصفات المنتج

9. معلومات التخلص

Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.

10. الاتصال والدعم

For further assistance or inquiries, please contact Permatex:

• الشركة المصنعة: Permatex Chemicals, a division of ITW
• عنوان: Solon, OH 44139, USA
• رقم مجاني: 866-732-9502
• Webموقع: www.permatex.com

Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.

11. معلومات الضمان

Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com أو اتصل 866-732-9502 للحصول على أحدث معلومات الضمان.