مقدمة
The TC Electronic Alter Ego V2 Vintage Delay and Looper Pedal is designed to provide a wide array of classic echo and delay effects, along with a looper function. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal to ensure optimal performance and longevity.
يثبت
توصيل الطاقة
The Alter Ego V2 requires a 9V DC power supply, center negative, with a minimum current draw of 100mA. Ensure you use a compatible power adapter to prevent damage to the unit. Connect the power adapter to the 9V DC input jack on the pedal.
توصيلات الصوت
- قم بتوصيل آلتك الموسيقية (مثل الجيتار) بـ مدخل يتم توصيل مقبس الصوت على الجانب الأيمن من الدواسة باستخدام كابل آلة موسيقية قياسي مقاس 1/4 بوصة.
- قم بتوصيل الناتج قم بتوصيل مقبس على الجانب الأيسر من الدواسة بـ ampقم بتوصيل مكبر الصوت أو الدواسة التالية في سلسلة الإشارة الخاصة بك باستخدام كابل آلة قياسي مقاس 1/4 بوصة.
- For stereo operation, connect a second cable from the خرج ستيريو جاك إلى ثانية ampمكبر صوت أو جهاز إدخال ستيريو.
تشغيل الدواسة
Familiarize yourself with the controls and connections of your Alter Ego V2 pedal. The following image illustrates the layout of the pedal's controls.
الشكل 1: Front panel of the TC Electronic Alter Ego V2 pedal, showing the three main control knobs (Time, Feedback, Level), the 11-position delay type selector knob, two mini-toggle switches, and the footswitch.
ضوابط أكثرview
- مقبض الوقت: Adjusts the delay time, from short slap-back echoes to long, atmospheric repeats.
- ردود الفعل المقبض: Controls the number of repeats. Turn clockwise for more repeats, counter-clockwise for fewer.
- مقبض المستوى: Sets the volume of the delayed signal.
- DELAY TYPE Selector Knob: This 11-position rotary switch allows you to select between various vintage delay models and the TonePrint (TP) slot. The available types include:
- REV M: Reverse Delay with Modulation
- BDM2: Binson Echorec 2 emulation
- CKAT: Copicat Tape Echo emulation
- 2290 م: TC Electronic 2290 Digital Delay with Modulation
- الحلقة 1: Echoplex EP-1 emulation
- SP: Space Echo emulation
- T ORG: Tel-Ray Organ Tone emulation
- LP: وظيفة Looper
- DMM C: Deluxe Memory Man Chorus emulation
- EREC2: Echorec 2 emulation (another variant)
- TP: TonePrint slot for custom delay sounds
- Mini-Toggle Switches: Two small switches located between the main knobs. These typically control additional parameters such as modulation depth, subdivision, or other specific characteristics depending on the selected delay type. Refer to the official TC Electronic website for detailed descriptions of each switch's function per delay type.
- مفتاح القدم: Engages or bypasses the effect. In Looper mode, it controls recording, playback, and overdubbing.
TonePrint Functionality
The Alter Ego V2 supports TC Electronic's TonePrint technology. This allows you to beam custom-tuned delay sounds created by famous guitarists or design your own using the free TonePrint Editor software. To use TonePrint:
- Download the TonePrint App for your smartphone or the TonePrint Editor for your computer from the TC Electronic webموقع.
- Select the 'TP' position on the DELAY TYPE selector knob.
- Follow the instructions in the app or software to load a TonePrint into your pedal.
عملية الحلقة
When the DELAY TYPE selector is set to 'LP', the pedal functions as a looper. The footswitch controls the looping functions:
- ضغطة واحدة: Start recording a loop.
- Single Press (while recording): Stop recording and start playback.
- Double Press (while playing): أوقف التشغيل.
- Press and Hold (while playing): Undo/Redo last overdub.
- Press and Hold (while stopped): Clear the loop.
صيانة
The Alter Ego V2 pedal is designed for durability. To ensure its longevity:
- حافظ على نظافة الدواسة بمسحها بقطعة قماش ناعمة وجافة. تجنب استخدام المنظفات الكاشطة أو المذيبات.
- احمِ الدواسة من درجات الحرارة القصوى والرطوبة وأشعة الشمس المباشرة.
- تجنب إسقاط الدواسة أو تعريضها لصدمات قوية.
- Ensure all cables are connected securely but do not overtighten.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your Alter Ego V2 pedal, consider the following:
- لا يوجد صوت: تحقق من جميع توصيلات الكابلات (الأجهزة، amplifier, power). Ensure the power supply is correctly connected and providing the correct voltagه (9 فولت تيار مستمر).
- سلوك غير متوقع: Ensure the correct delay type is selected. If using TonePrint, verify the TonePrint was loaded correctly. Try resetting the pedal by disconnecting and reconnecting power.
- Noise/Hum: Ensure you are using a regulated power supply. Check for ground loops in your signal chain.
- TonePrint Editor Connectivity Issues: Refer to the support section of the TC Electronic website for the latest drivers and troubleshooting guides for the TonePrint Editor software.
For further assistance, consult the official TC Electronic support resources.
تحديد
| ميزة | مواصفة |
|---|---|
| رقم الموديل | 960750101 |
| وزن العنصر | 13 أونصة (0.37 كجم) |
| أبعاد المنتج | 4.61 × 2.48 × 2.91 بوصة |
| Unit Size (approx.) | 3.31 بوصة × 2.87 بوصة × 5 بوصة |
| مصدر الطاقة | كهرباء سلكية |
| المجلدtage | 9 فولت تيار مستمر |
| Ampإيراج | 0.1 مليamps (100mA) |
| تنسيق الإشارة | التناظرية |
| أول تاريخ متاح | 24 سبتمبر 2014 |
معلومات الضمان
TC Electronic products are covered by a limited warranty. For detailed information regarding the warranty period, terms, and conditions applicable to your Alter Ego V2 pedal, please refer to the official warranty statement available on the TC Electronic webالموقع أو تواصل مع خدمة العملاء مباشرةً. احتفظ بإثبات الشراء لطلبات الضمان.
يدعم
For the latest product information, firmware updates, TonePrint Editor software, and comprehensive support resources, please visit the official TC Electronic webموقع:
You can also find FAQs, user forums, and contact information for technical support on their webموقع.
