Furman P-8 PRO C Power Conditioner Instruction Manual

1. المقدمة

The Furman P-8 PRO C is a professional-grade power conditioner designed to provide advanced protection and clean power for your valuable audio, video, and electronic equipment. It incorporates Furman's exclusive Series Multi-Stagالحماية الإلكترونية (SMP)، وتقنية الترشيح الخطي (LiFT)، والحجم الكبيرtage Shutdown (EVS) to safeguard against power surges, spikes, and AC line noise, ensuring optimal performance and longevity of your connected devices.

2. معلومات السلامة

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Always connect the P-8 PRO C to a properly grounded 20-amp منفذ كهربائي.
• Do not overload the unit. The total current draw of all connected equipment must not exceed 20 amps.
• تأكد من وجود تهوية مناسبة حول الوحدة. لا تسد أي فتحات تهوية.
• أبقِ السوائل بعيدة عن الجهاز.
• تحذير بشأن الاقتراح 65: قد يحتوي هذا المنتج على مواد كيميائية معروفة في ولاية كاليفورنيا بأنها تسبب السرطان والعيوب الخلقية أو غيرها من الأضرار التناسلية.

3. مواصفات المنتج

3.1. Advanced Protection Technologies

• سلسلة متعددة Stage Protection (SMP): Furman's SMP circuit provides superior surge suppression, absorbing and dissipating damaging transient voltages without sacrificing itself. This ensures continuous protection for your equipment.
• Linear Filtering Technology (LiFT): LiFT significantly reduces AC line noise across a wide frequency range, delivering cleaner power to your sensitive electronics. This results in improved audio clarity and video resolution.
• المجلد المدقعtage Shutdown (EVS): The EVS circuit continuously monitors incoming voltage. If it detects an unsafe overvoltage condition (exceeding 137 volts), it automatically shuts down the connected equipment to prevent damage, then restores power once voltagيعود إلى مستوى آمن.

3.2. Outlets and Power

• إجمالي المنافذ: 9 (1 front-panel convenience outlet, 8 rear-panel outlets).
• Rear Outlets: تم تصميمه مع ample spacing to accommodate 'wall wart' power supplies and feature security strapping to prevent accidental disconnections.
• سلك الطاقة: Integrated 10-foot, 12-gauge power cord.
• Ampإيراج: 20-amp capacity, requiring a 20-amp female receptacle or a Furman ADP-1520B adapter for connection.

3.3. ميزات إضافية

• موصل BNC: A BNC connector is located on the rear panel for optional GN-LED or GN-I gooseneck lights (sold separately) to illuminate the rear of your rack.
• تصميم قابل للتثبيت على الرف: Standard 1U rack-mount chassis for easy integration into professional setups.

4. الإعداد والتثبيت

4.1 تركيب الرف

The P-8 PRO C is designed for standard 1U rack installation. Secure the unit using appropriate rack screws (not included) through the mounting ears on both sides of the front panel. Ensure sufficient space for ventilation.

4.2. توصيل الطاقة

1. Connect the integrated 10-foot, 12-gauge power cord from the P-8 PRO C to a dedicated 20-amp, 120-volt AC grounded electrical outlet. If a 20-amp receptacle is not available, use a Furman ADP-1520B adapter.
2. Ensure the main power switch on the front panel of the P-8 PRO C is in the OFF position before connecting any equipment.

4.3. توصيل المعدات

Plug your audio, video, or electronic equipment into the 8 rear-panel outlets and the 1 front-panel convenience outlet. Utilize the wide spacing of the rear outlets for larger power adapters. For critical equipment, consider using the security strapping to prevent accidental unplugging.

4.4. Optional Gooseneck Lights

If desired, connect optional Furman GN-LED or GN-I gooseneck lights to the BNC connector on the rear panel for rack illumination.

5. التشغيل

5.1. تشغيل / إيقاف التشغيل

Once all equipment is connected, flip the main power switch on the front panel to the ON position. The P-8 PRO C will power on, and connected equipment will receive conditioned and protected power.

5.2. مصابيح المؤشر

• Protection OK (Green LED): This indicator illuminates green when the SMP circuit is active and providing surge protection. If this light is off, the unit's surge protection has been compromised, and the unit should be serviced.
• المجلد المدقعtage (Red LED): This indicator illuminates red when the incoming voltage exceeds safe operating levels (above 137 volts). The EVS circuit will shut down power to connected equipment until the voltage returns to a safe range.

6. الصيانة

The Furman P-8 PRO C is designed for reliable, maintenance-free operation. No user-serviceable parts are inside. For cleaning, disconnect the unit from the power source and wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. استكشاف الأخطاء وإصلاحها

7.1. No Power to Outlets

• Check the main power switch on the front panel to ensure it is in the ON position.
• Verify that the P-8 PRO C is securely plugged into a functioning 20-amp منفذ الحائط.
• Check the circuit breaker on the P-8 PRO C (usually located near the power cord input) and reset if tripped.
• If the 'Extreme Voltage' indicator is lit, the incoming voltage is too high. The unit will automatically restore power when conditions normalize.
• If the 'Protection OK' indicator is off, the surge protection circuit may be compromised. Discontinue use and contact Furman support.

7.2. Audio/Video Noise

• تأكد من تأريض جميع المعدات بشكل صحيح.
• تحقق من وصلات الكابلات المفكوكة.
• The LiFT technology in the P-8 PRO C is designed to reduce AC line noise. If noise persists, try isolating the source of the noise by unplugging devices one by one.

8. المواصفات

9. ماذا يوجد في الصندوق

• 1 x Furman P-8 PRO C Power Conditioner

10. الضمان والدعم

Furman products are backed by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Furman webالموقع أو تواصل مع خدمة العملاء. احتفظ بإيصال الشراء كإثبات للشراء في حال وجود أي مطالبات بالضمان.