Näve 5123003 Solar LED Light Rope Bee Design Instruction Manual

1. المقدمة

Thank you for choosing the Näve 5123003 Solar LED Light Rope Bee Design. This product is designed to provide decorative outdoor lighting using solar energy. It features 10 LED lights encased in charming bee-shaped covers, ideal for enhancing balconies, terraces, and gardens. Please read this manual carefully before installation and use to ensure proper operation and longevity of your solar lights.

2. معلومات السلامة

• Ensure the solar panel is placed in an area that receives direct sunlight for optimal charging.
• Do not attempt to open or modify the solar panel or battery compartment, as this may damage the product and void the warranty.
• قم بتخزين المنتج بعيدًا عن اللهب المكشوف أو مصادر الحرارة الشديدة.
• This product is designed for outdoor use. While weather-resistant, avoid submerging the lights or solar panel in water.
• التخلص من البطاريات وفقا للقوانين المحلية.
• يحفظ بعيدًا عن متناول الأطفال والحيوانات الأليفة.

3. محتويات العبوة

تأكد من وجود جميع المكونات في العبوة:

• 1x Solar LED Light Rope with 10 Bee Design LEDs
• 1x Solar Panel with integrated rechargeable AA NiMH 1.2V 400mA battery
• 1x Ground Stake for solar panel

4. الإعداد

1. فك المنتج: قم بإزالة جميع المكونات بعناية من العبوة.
2. قم بتجميع اللوحة الشمسية: Attach the ground stake to the solar panel unit. Ensure it is securely fastened.
   

   Image 1: Solar panel with ground stake and bee lights arranged on a bush. The solar panel should be positioned to receive maximum sunlight.

3. وضع اللوحة الشمسية: Choose a location for the solar panel where it will receive at least 6-8 hours of direct sunlight daily. Push the ground stake firmly into the soil. Avoid shaded areas from trees, buildings, or other obstructions.
4. ترتيب الأضواء: Uncoil the light rope and arrange the bee lights as desired in your garden, on a balcony railing, or around a patio. The total length of the light rope is 380 cm, with a lead cable of 180 cm from the solar panel to the first light.
   

   الصورة 2: عن قرب view of the individual bee-shaped LED lights, showing their design and how they can be integrated into garden decor.
5. التهمة الاولية: Before first use, ensure the solar panel is exposed to direct sunlight for a full day (at least 8 hours) with the power switch in the "ON" position. This allows the battery to fully charge.

5. تعليمات التشغيل

The Näve Solar LED Light Rope is designed for automatic operation.

• مفتاح التشغيل: Locate the ON/OFF switch on the back or bottom of the solar panel unit. Slide the switch to the "ON" position to activate the lights.
• اختيار الوضع: Some models may include a "MODE" button next to the ON/OFF switch. Press this button to cycle between continuous (steady on) and flashing light modes. If no mode button is present, the lights will operate in a single, pre-set mode.
• عملية تلقائية: Once activated and sufficiently charged, the lights will automatically turn on at dusk and turn off at dawn. The duration of illumination depends on the amount of sunlight received during the day.

6. الصيانة

• تنظيف اللوحة الشمسية: امسح سطح اللوحة الشمسية بانتظام بقطعة قماش ناعمة.amp قطعة قماش لإزالة الغبار والأوساخ والحطام. تضمن اللوحة النظيفة شحنًا فعالًا.
• استبدال البطارية: The integrated battery is a 1x AA NiMH 1.2V 400mA rechargeable battery. If the lights' performance significantly decreases over time, the battery may need replacement.
  1. Carefully open the battery compartment on the solar panel unit (usually secured with small screws).
  2. Replace the old battery with a new rechargeable AA NiMH 1.2V 400mA battery of the same type and capacity.
  3. Ensure correct polarity (+/-) when inserting the new battery.
  4. أغلق حجرة البطارية بشكل آمن.
• التخزين الشتوي: During prolonged periods of low sunlight or harsh winter conditions, it is recommended to store the solar lights indoors. Clean the unit and store it in a dry place.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

• رقم الموديل: 5123003
• مصدر الضوء: 10x LED أبيض
• بطارية: 1x AA NiMH 1.2 V 400 mA (rechargeable)
• مادة: بلاستيك
• الطول الإجمالي: 380 سم (حوالي 149.6 بوصة)
• طول كابل الرصاص: 180 سم (حوالي 70.9 بوصة)
• المسافة بين المصابيح: 20 سم (حوالي 7.9 بوصة)
• مصدر الطاقة: Solar, battery-powered
• واتtage: 1 واط
• وزن السلعة: 7.8 أونصة (حوالي 221 جرامًا)
• أبعاد المنتج: 1.57 x 2.17 x 9.65 inches (solar panel unit)

9. الضمان والدعم

For warranty information or technical support, please refer to the retailer where the product was purchased or contact Näve customer service. Keep your proof of purchase for any warranty claims.

For further assistance, please visit the manufacturer's webالموقع أو الاتصال بقنوات الدعم الخاصة بهم.