Newon LED Open Sign with Programmable Business Hours

1. المقدمة

Thank you for choosing the Newon LED Open Sign, Model 6093. This sign is designed to clearly indicate your business status with bright LED illumination and offers programmable business hours for enhanced customer communication. The 'OPEN' display can be set to flash or remain static, providing flexibility for your business needs. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your sign.

الصورة 1: الجبهة view of the Newon LED Open Sign, displaying 'OPEN' and digital business hours.

2. معلومات السلامة

• Read all instructions before operating the sign.
• تأكد من حجم امدادات الطاقةtage (120VAC 60Hz) matches your electrical outlet.
• Do not expose the sign to water or excessive moisture. This product is designed for indoor use or sheltered outdoor use.
• تجنب سد فتحات التهوية.
• Do not attempt to open or repair the sign yourself. Refer all servicing to qualified personnel.
• يحفظ بعيدًا عن متناول الأطفال.

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

• Newon LED Open Sign (Model 6093)
• Power Adapter (120VAC 60Hz input)
• Remote Control for programming
• Wall Mount Hardware (screws, anchors)
• دليل التعليمات (هذا المستند)

4. الإعداد

4.1 Mounting the Sign

1. Select a suitable indoor location for the sign, ensuring it is visible and protected from direct weather exposure.
2. Using the provided wall mount hardware, securely attach the sign to a wall or hang it from a ceiling using appropriate chains (not included). Ensure the mounting surface can support the sign's weight.

4.2 توصيل الطاقة

1. Locate the power input ports on the sign. There are two 12V DC 2.5A power inputs.
2. Connect the power adapter to one of the power input ports on the sign.
3. Plug the power adapter into a standard 120VAC 60Hz electrical outlet.
4. Ensure the ON/OFF switch on the side of the sign is in the 'ON' position.

Image 2: Detail of the sign's controls and remote for programming and operation.

5. التشغيل

5.1 Programming Business Hours

Use the provided remote control to set your business hours. The sign features a battery backup to retain programmed hours during power outagإِسْ

1. اضغط على برنامج button on the remote control. The time display for the first day (e.g., Monday) will begin to blink.
2. استخدم + و - buttons to adjust the hour and minute values up or down in 30-minute increments.
3. اضغط على سهم button (right arrow) to move to the next time slot (e.g., from opening time to closing time, or to the next day).
4. Repeat step 2 for each time slot you wish to set.
5. To set a day as مغلق, press the arrow button until the time display for that specific day is blinking. Then, press the مغلق button on the remote. The display for that day will show 'CLOSED'.
6. Once all hours are set, press the برنامج button again to save and exit programming mode.

5.2 Setting 'OPEN' Display Mode

The 'OPEN' portion of the sign can be set to flash or remain static.

• حدد موقع فلاش/ثابت switch on the side of the sign.
• Slide the switch to 'FLASH' for a dynamic, attention-grabbing effect.
• Slide the switch to 'STATIC' for a constant, steady illumination.

5.3 Adjusting Flash Speed (if in Flash mode)

If the 'OPEN' display is set to flash, you can adjust its speed.

• حدد موقع SLOWER/FASTER switch on the side of the sign.
• Slide the switch towards 'SLOWER' to decrease the flash rate.
• Slide the switch towards 'FASTER' to increase the flash rate.

5.4 Turning the Sign On/Off

The sign has a main power switch.

• حدد موقع تشغيل/إيقاف switch on the side of the sign.
• Slide the switch to 'ON' to power the sign.
• Slide the switch to 'OFF' to turn off the sign. Note that the programmed business hours will remain lit even when the 'OPEN' portion is off, due to the battery backup.

6. الصيانة

• تنظيف: Gently wipe the sign's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the LED display or plastic housing.
• سلك الطاقة: Regularly inspect the power cord for any signs of damage. If damaged, discontinue use and replace with an approved power adapter.
• تخزين: If storing the sign for an extended period, disconnect it from power and store it in a cool, dry place.

7. استكشاف الأخطاء وإصلاحها

• Sign does not light up:
  • Ensure the power adapter is securely plugged into both the sign and a working electrical outlet.
  • Check that the ON/OFF switch on the side of the sign is in the 'ON' position.
  • تأكد من أن المخرج الكهربائي يعمل عن طريق توصيل جهاز آخر.
• 'OPEN' display is not flashing/static:
  • Check the FLASH/STATIC switch on the side of the sign and adjust it to your desired mode.
• Business hours are incorrect or not displaying:
  • Re-enter the programming mode using the remote control and verify the settings.
  • تأكد من أن جهاز التحكم عن بعد يحتوي على بطاريات تعمل.
• Remote control is not responding:
  • افحص البطاريات في جهاز التحكم عن بعد واستبدلها إذا لزم الأمر.
  • Ensure there are no obstructions between the remote and the sign's sensor.

8. المواصفات

• رقم الموديل: 6093
• أبعاد: 23.4 بوصة طول × 20.4 بوصة عرض (59.44 سم طول × 51.82 سم عرض)
• وزن: حوالي 8 رطل (3.63 كجم)
• مادة: بلاستيك
• نوع الضوء: قاد
• مدخلات الطاقة: 120VAC 60Hz
• الإخراج: شنومكسف دس شنومكسا
• سمات: Programmable business hours, Flash/Static 'OPEN' display, Adjustable flash speed, Battery backup for programmed hours.
• المكونات المتضمنة: أجهزة التثبيت على الحائط

9. الضمان والدعم

Newon products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Newon webيرجى الاحتفاظ بإثبات الشراء الخاص بك للمطالبة بالضمان.